1. everything RF
  2. RF Newsletters
more
PREV 6 July, 2016 NEXT

New RF & Microwave Products this Week

July 6, 2016 - everything RF Newsletter
 
everything RF
Date: July 6, 2016
 
New: Antenna Search Tool
Antenna Search Tool
Antenna Search Tool on everything RF
We have recently updated the Antenna Search tool on everything RF. There are 4,000 Antennas from 48 manufacturers listed on the site. Use the search tools to find antennas by Type, Frequency, Gain and a number of other parameters. Click here to try it out!
 
 
 
New RF & Microwave Products this Week
RF Variable Attenuator
75 Ohm Glitch Less Digital Attenuator from 1 to 2500 MHz

RF Variable Attenuator from Peregrine Semiconductor

The PE4314 is a 75 Ohm glitch less RF digital step attenuator that operates from 1 MHz to 2500 MHz. It is ideal for wired broadband applications in cable/satellite customer premises equipment (CPE) and infrastructure equipment.
 
Download Datasheet | Product Details
 
Front End Module
Front-End Module for 2G/3G/4G Handsets with Dual Antenna

Front End Module from Skyworks

The SKY77928-11 from Skyworks is a front end module that integrates power amplifiers and required switching solutions for 2G/3G/4G cellular handsets with dual antennas. Two PAs support GSM, GPRS, EDGE multi-slot operation, TD-SCDMA and TDD LTE standards.
 
Download Datasheet | Product Details
 
RF Mixer
Double-Balanced Mixer from 8 to 16 GHz

RF Mixer from Analog Devices

The HMC412BMS8GE from Analog Devces is a passive double-balanced mixer that operates from 8 to 16 GHz. The mixer operates with LO drive levels between 9 to 15 dBm and provides less than 11 dB of conversion loss accross the entire specified frequency band.
 
Download Datasheet | Product Details
 
RF Module
Single Band 2.4 GHz 802.11b/g/n Wi-Fi Module

RF Module from Particle

The P0 from Particle is a programmable, single band 2.4 GHz IEEE 802.11b/g/n complaint Wi-Fi module that contains both the Broadcom Wi-Fi chip and a reprogrammable STM32 microcontroller. It comes preloaded with particle firmware libraries and is designed to simplify transition from prototype to production.
 
Download Datasheet | Product Details
 
RF Amplifier
Distributed Low Noise Amplifier 2 to 22 GHz

RF Amplifier from Custom MMIC

The CMD241 from Custom MMIC is a GaAs distributed low noise amplifier that operates from 2 to 22 GHz. This amplifier delivers a gain of greater than 13 dB with a noise figure of 2.3 dB and P1dB of 21 dBm. It requires a 5 V power supply and draws 74 mA of current.
 
Download Datasheet | Product Details
 
Modulator
Low Power Direct Quadrature Modulator from 700 MHz to 6 GHz

Modulator from Linear Technology

The LTC5589 from Linear Technology is a low power direct quadrature modulator designed for low power wireless applications from 700 MHz to 6 GHz that enables direct modulation of differential baseband I and Q signals on an RF carrier.
 
Download Datasheet | Product Details
 
Wireless Charging Coil
6.3 µH Wireless Charging Transmitter Coil/Shield

Wireless Charging Coil from Vishay

The IWTX-47R0BE-11 6.3 µH from Vishay is an AEC-Q200 qualified wireless charging transmitter coil. This qualification makes it ideal for integrating wireless charging in automobiles. The coil has an Inductance of 6.3 µH, DCR of 50 µOhms and a Q factor of 190 at 200 kHz.
 
Download Datasheet | Product Details
 
Coaxial Isolator
SMA RF Isolator from 8 to 12.4 GHz

Coaxial Isolator from HASCO Components

The HSI8012 from HASCO Components is a Coaxial Isolator that operates from 8 to 12.4 GHz. It has an insertion loss of under 0.4 dB and Isolation of over 20 dB. The single junction isolator can handle up to 500 Watts of power and has a VSWR of 1.25:1.
 
Download Datasheet | Product Details
 
Coaxial Circulator
400 to 600 MHz Coaxial Circulator

Coaxial Circulator from Renaissance Electronics Corporation

The 3A2NGZ is a coaxial circulator from REC- USA that operates from 400 to 600 MHz. It has an insertion loss of 0.4 dB, isolation of 16 dB and VSWR of 1.25:1. The circulator can handle up to 300 watts of CW power. It is available in a module that measures 2.38 x 2.25 x 1.0 inches and is ideal to duplex a high power amplifier to an antenna and receiver.
 
Download Datasheet | Product Details
 
RF Switch
SPDT Absorptive PIN Diode Switch from 30 to 4000 MHz

RF Switch from UMCC

The SW-A31H-2S from Universal Microwave Components is an SPDT absorptive PIN diode switch that operates from 30 to 4000 MHz. It has a high isolation of over 35 dB and a low insertion loss under 1.3 dB through the band. The switch can handle up to 36 dBm of power and has a VSWR of 1.4:1. It has a switching time of 750 ns.
 
Download Datasheet | Product Details
 
RF Amplifier
Balanced Driver Amplifier from 26 to 35 GHz

RF Amplifier from Custom MMIC

The CMD243 from Custom MMIC is a GaAs MMIC driver amplifier that operates from 26 to 35 GHz. This amplifier delivers a gain of 15.5 dB with a P1dB of 21 dBm and noise figure of 4.4 dB. It requires a supply voltage of 5 Volts and draws 90 mA of current.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Rugged Battery Operated USB Real Time Spectrum Analyzer from 9 kHz to 3 GHz

RF Spectrum Analyzer from Tektronix, Inc.

The RSA503A is a USB based Real Time Spectrum Analyzer that operates from 9 kHz to 3GHz. This rugged battery operated analyzer can be controlled from a PC/Tablet using Tektronix SignalVu-PC™ RF Signal Analysis Software to provide real time spectrum analysis, streaming capture and deep signal analysis capabilities.
 
Download Datasheet | Product Details
 
RF Test Set
All-in-one Base Station Simulator

RF Test Set from Anritsu

The MD8475B Signalling Tester from Anritsu is an all-in-one base station simulator supporting LTE, LTE-Advanced, W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/GPRS/EGPRS, CDMA2000 1X/1xEV-DO Rev. A. and TD-SCDMA/TD-HSPA.
 
Product Details
 
PXI RF Multiplexer
600 MHz RF PXI Multiplexers

PXI RF Multiplexer from Pickering Interfaces

The 40-760 Series are PXI RF Multiplexers from Pickering Interfaces that operate from DC to 600 MHz. These multiplexers are available in a number of configurations which include dual, quad and octal SP4T, single, dual and quad SP8T, single and dual SP16T and single SP32T.
 
Download Datasheet | Product Details
 
RF Amplifier
Bi-Directional Amplifier from 2.2 to 2.5 GHz

RF Amplifier from Triad RF Systems

The TTRM1078D from Triad RF Systems is a bi-directional amplifier that operates from 2.2 to 2.5 GHz for UAS radio links utilizing MIMO technology. It is capable of high 20 W output per channel for QPSK operation and 4 W per channel for higher data rate applications such as 64 QAM OFDM.
 
Download Datasheet | Product Details
 
Laminate
Thermally Enhanced Laminates and Prepregs

Laminate from Rogers Corporation

The 92ML from Rogers Corporation are thermally enhanced laminates and prepregs, specifically engineered and manufactured to meet the demands of high power applications. They are halogen-free, flame retardant, thermally conductive epoxy based prepregs and laminates.
 
Download Datasheet | Product Details
 
Voltage Controlled Oscillator
Octave Band VCO for Military and Commercial Applications

Voltage Controlled Oscillator from Qorvo

The RFVC6405 is an octave band VCO that operates from 2000 MHz to 4000 MHz. It has been designed for high performance transceiver applications, Test and Measurement and Wideband Radios for Military and Commercial Applications. The VCO has a phase noise of -112 dBc/Hz at 100 kHz offset and can provide up to 3 dBm of output power.
 
Download Datasheet | Product Details
 
Phase Locked Loop
5900 MHz Phase Locked Loop

Phase Locked Loop from Z-COMM

The RFS5900A-LF from Z-Comm is a phase locked loop that operates at 5900 MHz, phase locked to a 10 MHz reference with a stability of 2.5 ppm. It has a phase noise of -80 dBc/Hz, -85 dBc/Hz, and -103 dBc/Hz at the 1 kHz, 10 kHz and 100 kHz offsets, respectively.
 
Product Details
 
Voltage Controlled Oscillator
Surface Mount VCO from 5.5 to 9.5 GHz

Voltage Controlled Oscillator from Synergy Microwave Corporation

The DCO5001000-5 from Synergy Microwave is a voltage controlled oscillator that operates from 5.5 to 9.5 GHz. It has a tuning voltage range of 0.3 to 12 V, features phase noise performance of -68 dBc/Hz @ 10 kHz offset and covers the frequency range with a tuning sensitivity of 120-680 MHz/V.
 
Download Datasheet | Product Details
 
Antennas Hub: New Products, News and White Papers
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.