1. everything RF
  2. RF Newsletters
more
PREV 20 July, 2016 NEXT

New RF & Microwave Products this Week

July 20, 2016 - everything RF Newsletter
 
everything RF
Date: July 20, 2016
 
Sponsored by Inmet (API Technologies)
 
 
 
New RF & Microwave Products this Week
Vector Network Analyzer
2½ Port PC Controlled Vector Network Analyzer from 400 MHz to 6 GHz

Vector Network Analyzer from MegiQ

The VNA-0460e from MegiQ is a two and a half port bidirectional vector network analyzer that operates from 400 MHz to 6 GHz. This modular VNA can measure complete S Parameters for 2 ports and S13, S23 for the 3rd port. It is controlled via a PC through a USB interface.
 
Download Datasheet | Product Details
 
RF Amplifier
2.5 W RF LDMOS Amplifier from 1.4 to 2.2 GHz

RF Amplifier from NXP Semiconductors

The A2I20D020N from NXP Semiconductors is a RF LDMOS Amplifier that operates from 1.4 to 2.2 GHz. It delivers 2.5 Watts of output power with a gain of 31 dB and an efficiency of 19.7%. This wideband integrated circuit is designed with on-chip matching and its multi-stage structure is rated for 20 to 32 V operation.
 
Download Datasheet | Product Details
 
RF Module
Bluetooth Low Energy Module with Low Current Consumption

RF Module from Toshiba

The TC35678FSG from Toshiba is a new IC for Bluetooth smart devices with a very low current consumption. Adoption of a highly efficient DC-DC converter and an original low-power circuit design reduces current consumption by nearly 46%, with peak current consumption of 3.6 mA at 3V supply voltage in transmitting mode.
 
Download Datasheet | Product Details
 
Transceiver
Low Power RF Transceiver from 300 to 960 MHz

Transceiver from Melexis

The MLX73290-A is a RF Transceiver from Melexis that supports multiple bands from 300 to 960 MHz. This highly integrated RF IC delivers a transmitter output from -20 dBm to 13 dBm, has a receiver sensitivity down to -120 dBm in a 15kHz channel bandwidth.
 
Download Datasheet | Product Details
 
Block Up Converter
250 Watt Ku-Band BUC and SSPA for TWTA Replacement

Block Up Converter from Norsat

The ATOMBKU250 from Norsat is a Block Up Converter Series for the Ku-Band. It accepts an input frequency from 950 MHz to 1450 MHz and up-converts it to 12.25-18 GHz. The BUC has a compression gain of 60 dB and provide an output power (Psat) of 250 Watts. It has a Waveguide WR-75 Output Interface and N Type input connector.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
Variable Attenuators
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability. To learn more, download the data sheet.
 
 
 
Frequency Doubler
5 to 15 GHz Double Balanced Frequency Doubler

Frequency Doubler from Marki Microwave

The MMD-1030HSM from Marki Microwave is a passive double balanced MMIC frequency doubler that accepts an input frequency from 5 to 15 GHz (10 to 30 GHz output frequency). It features a low conversion loss of 12 dB with excellent isolations and harmonic suppressions throughout the frequency band.
 
Download Datasheet | Product Details
 
Duplexer
High Power Cavity Duplexer from 885 to 909 MHz and 930 to 945 MHz

Duplexer from Anatech Electronics

The AD897-942D208 from Anatech is a cavity duplexer with pass band frequencies from 885 to 909 MHz and 930 to 945 MHz. It has an insertion loss of upto 1.6 dB, pass band ripple of 0.9 dB and return loss of over 20 dB. This duplexer can handle 100 Watts of power.
 
Download Datasheet | Product Details
 
Power Divider
QMA Power Dividers from 0.698 to 2.7 GHz

Power Divider from MECA

The QMA Power Dividers from MECA consist of 2 Way, 3 Way, 4 Way and 8 Way dividers that operates from 0.698 to 2.7 GHz. They can handle an average power of up to 40 Watts have an Insertion Loss under 1.4 dB, over 20 dB of isolation and amplitude balance of 0.2 dB.
 
Download Datasheet | Product Details
 
PXI RF Signal Transceiver
PXI Vector Transceiver from 60 MHz to 6 GHz

PXI RF Signal Transceiver from Keysight Technologies

The M9421A from Keysight Technologies is a VST PXIe Vector Transceiver that consists of a vector signal generation and analysis in four slots of a PXI Chasis. The VST is purpose-built for rapid solution creation and faster throughput in manufacturing test of wireless components , power amplifiers, and RF front-end modules. It operates from 60 MHz to 3.8/6 GHz and provides a 160 MHz I/Q bandwidth in both vector signal generation and analysis.
 
Download Datasheet | Product Details
 
Signal Generator
USB-Compatible Signal Generators from 6 to 18 GHz

Signal Generator from Vaunix

The LMS-183DX from Vaunix is an USB-compatible, synthesized signal generators that operates from 6 to 18 GHz. It has fast switching time of 100-microsecond, and 100 Hz frequency resolution. This device can be plugged in and controlled/programmed in to the USB port of a PC.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
9 kHz to 44.5 GHz Spectrum/Signal Analyzer with Built-in Preamp

RF Spectrum Analyzer from Anritsu

The MS2840A is a spectrum/signal analyzer from Anritsu that supports measurements across a wide frequency band from 9 kHz to 44.5 GHz with built-in preamp option. It eliminates image-response effects at wideband signal measurements and supports millimeter-wave wideband wireless applications, such as wireless backhaul, automobile radar, WiGig, etc.
 
Download Datasheet | Product Details
 
RF Amplifier
24 dB Low Noise Amplifier from 10.1 GHz to 11.7 GHz

RF Amplifier from Analog Devices

The ADL5723 from Analog Devices is a low noise amplifier that operates from 10.1 GHz to 11.7 GHz. It offers a single-ended 50 Ohms input impedance and provides a 100 Ohms balanced differential output that is ideal for driving differential down-converters and RF sampling analog-to-digital converters (ADCs).
 
Download Datasheet | Product Details
 
RF Connector
DC to 26.5 GHz SMA End Launch Connectors

RF Connector from Amphenol RF

The 901-10510-1 from Amphenol is a series of high frequency SMA end launch connectors that operates from DC to 26.5 GHz. This series offers exceptional VSWR performance up to 26.5 GHz and features an optimized end launch design with either through-hole legs or traditional slide-on mounting legs.
 
Download Datasheet | Product Details
 
RF Amplifier
50 Watts Rack Mount GaN Power Amplifier 6 to 18 GHz

RF Amplifier from Comtech PST

The BHE69189-50 from Comtech PST is a solid state power amplifier that operates from 6 to 18 GHz. This Gan Based Class AB amplifier provides an output power of 50 Watts with a gain of over 47 dB and a load VSWR of 2.0:1. It has a switching speed of less than 2 microsecond, third-harmonic rejections are better than –12 and –22 dBc and spurious of under -60 dBc.
 
Download Datasheet | Product Details
 
RF Amplifier
35 Watts GaN Power Amplifier from 1700 to 2400 MHz

RF Amplifier from NuWaves Engineering

The 12D05A from NuPower is a solid state power amplifier that operates from 1700 MHz to 2400 MHz. It provides saturated RF power of 35 Watts in the L-band and 20 Watts in the S-band, with module efficiencies of 35% to 55%. With a nominal input drive level of 0 dBm, it offers 44 dB of RF gain. This amplifier requires a supply voltage of 26 to 30 VDC and consumes 3A of current.
 
Download Datasheet | Product Details
 
RF Amplifier
63 Watts, X Band Power Amplifier

RF Amplifier from ERZIA

The ERZ-HPA-0950-1050-48 is a X band High Power Amplifier that operates from 9.5 to 10.5 GHz while providing a CW output power of 48 dBm and a gain of 50 dB. The amplifier requires a supply of 28 V and is available in a module that measures 245x170x60 mm.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.