1. everything RF
  2. RF Newsletters
more
PREV 3 Aug, 2016 NEXT

New RF & Microwave Products this Week

3 Aug, 2016 - everything RF Newsletter
 
everything RF
Date: 3 Aug, 2016
 
Sponsored by Inmet (API Technologies)
 
 
 
New RF & Microwave Products this Week
Down Converter
RF Downconverter / Tuner from 200 to 2500 MHz

Down Converter from NuWaves Engineering

The ConvertaWave2 is a robust broadband RF downconverter / tuner that covers the 200 to 2500 MHz frequency band. The output of the downconverter is a 70 MHz IF signal that has been band-limited to one of five user-selectable IF bandwidths between 500 kHz and 10 MHz.
 
Download Datasheet | Product Details
 
RF Module
Bluetooth Low Energy Module with Low Current Consumption

RF Module from Toshiba

The TC35678FSG from Toshiba is a new IC for Bluetooth smart devices with a very low current consumption. Adoption of a highly efficient DC-DC converter and an original low-power circuit design reduces current consumption by nearly 46%, with peak current consumption of 3.6 mA at 3V supply voltage in transmitting mode.
 
Download Datasheet | Product Details
 
RF Amplifier
75 to 100 GHz Low Noise Amplifier

RF Amplifier from ERZIA

The ERZ-LNA-7500-10000-20-4 frin ERZIA is a Low Noise Amplifier that operates from 75 to 100 GHz. It provides an output power of 0 dBm with a gain of 20 dB and a noise figure below 4 dB. Its compact size and modularity makes it ideal for a wide range of applications like Industrial, Telecom, Satcom, Sapce and Military.
 
Download Datasheet | Product Details
 
Power Sensor
USB/Ethernet Controlled Power Sensor from 50 MHz to 6 GHz

Power Sensor from Mini Circuits

The PWR-6LRMS-RC from Mini-Circuits is a true RMS Smart Power Sensor that operates from 50 MHz to 6 GHz. It has a dynamic range of 55 dB and a power range from -45 to 10 dBm. This precision test device can be controlled via USB or Ethernet, turning any Windows or Linux PC into a power meter.
 
Download Datasheet | Product Details
 
Phase Noise Analyzer
2 MHz to 26 GHz Signal Source Analyzer

Phase Noise Analyzer from Berkeley Nucleonics Corporation

The 7300 from Berkeley Nucleonics Corporation is a Signal Source Analyzer that operates from 2 MHz to 26 GHz. This analyzer can make fast and accurate measurements of single sideband residual and additive phase noise, amplitude noise, and baseband noise.
 
Download Datasheet | Product Details
 
Wireless Charging Solution
15 Watt WPC Compatible Wireless Power Transmitter

Wireless Charging Solution from Texas Instruments

The BQ501210 from Texas Instruments is a WPC V1.2 compatible wireless power transmitter that integrates the logic functions required to wirelessly transfer power to a WPC-compatible receiver with the capability of delivering up to 15 W.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
API Inmet Fixed Attenuator
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability. To learn more, download the data sheet.
 
 
 
RF Switch
1 Watt Reflective SPDT Switch from DC to 4 GHz

RF Switch from United Monolithic Semiconductors

The CHS5105-QAG from United Monolithic Semiconductors is a reflective SPDT switch that operates from DC to 4 GHz. It has an insertion loss of 0.74 dB through the band and off-state isolation of 40 dB. The switch can handle an input power of 30 dBm and has a return loss of 16 dB.
 
Download Datasheet | Product Details
 
Power Divider
4-Way Resistive Power Divider from 6 to 40 GHz

Power Divider from MECA

The 804-3-23.000 from MECA is a 4-way resistive power divider that operates from 6 to 40 GHz. The divider can handle up to 30 Watts of power, has an insertion loss less than 2.6 dB, an isolation of over 14 dB and a VSWR under 1.80:1. It is available in a module with 2.92 mm female connectors.
 
Download Datasheet | Product Details
 
RF Switch
20 to 6000 MHz, SP10T Reflective PIN-Diode Switch

RF Switch from UMCC

The SR-B300-10S is a SP10T reflective PIN Switch from UMCC that operates from 20 MHz to 6000 MHz. It has an insertion loss of under 2.8 dB up to 3 GHz and under 3.3 dB up to 6 GHz with an isolation up to 75 dB. The switch has a rise/fall time of 150 ns and an on/off time of 250 ns.
 
Download Datasheet | Product Details
 
RF Mixer
Double Balanced Passive Mixer Operates up to 65 GHz

RF Mixer from Marki Microwave

The MM1-2567LS from Marki Microwave is a double balanced MMIC mixer that operates up to 65 GHz. This is Marki's highest frequency mixer ever (soo far). It features a flat, smooth conversion loss from 25 to 67 GHz with a low frequency IF.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
Surface Mount Frequency Synthesizer from 7 to 12 GHz

Frequency Synthesizer from EM Research

The HFS-12000-XA from EM Research is a Frequency Synthesizer that can generate a signal from 7 to 12 GHz. This synthesizer has step sizes starting from 1 kHz to 1 MHz and provides 10 dBm of output power. It can generate a signal which has harmonics under -17 dBc and spurious suppression of less than -60 dBc.
 
Download Datasheet | Product Details
 
RF Connector
Mini Din Series of Connectors and Cable Assemblies

RF Connector from VidaRF

The 4.1/9.5 Mini Din Series of connectors and cable assemblies from VidaRF are designed for the mobile communication industry. These are low PIM Connectors and assemblies with an Albaloy plating.
 
Product Details
 
RF Transistor
40 Watt LDMOS Transistor from 1805 to 2170 MHz

RF Transistor from Ampleon

The BLM7G1822S-40AB from Ampleon is a 2-stage LDMOS MMIC power amplifier that operates from 1805 to 2170 MHz. It delivers a gain from 30 to 33 dB, has a P1dB of 40 W and a drain efficiency up to 26.5%. The amplifier requires a supply voltage of 28 Volts.
 
Download Datasheet | Product Details
 
RF Amplifier
5 W Compact L & S-Band Power Amplifier from 1 to 2.5 GHz

RF Amplifier from NuWaves Engineering

The NW-PA-12A03A from NuWaves is a Micro L- & S-Band Power Amplifier that operates from 1 GHz to 2.5 GHz. It delivers an output power of 5 Watts with a gain of 37 dB when driven with a 0 dBm (1 mW) RF input signal. This amplifier requires a supply voltage of 26 to 30 VDC and consumes less than 1.25 A of current.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
DC to 3 GHz Rotary Attenuator with 70 dB Range

RF Variable Attenuator from JFW Industries

The 50R-397 from JFW Industries is a rotary attenuator that operates from DC to 3 GHz with an attenuation range of 70 dB and step size of 10 dB. It can handle up to 2 watts of power and is available with SMA, N Type connectors. This attenuator can be easily integrated into RF systems for OEM or used for test applications.
 
Download Datasheet | Product Details
 
Signal Generator
Signal Generator for DOCSIS 3.1 Applications

Signal Generator from Rohde & Schwarz

The SFD DOCSIS signal generator from Rohde & Schwarz has a downstream frequency range from 47 to 1218 MHz (extendable to 1794 MHz) and upstream frequency range from 5 to 204 MHz. It produces signals for DOCSIS 3.1, DOCSIS 3.0, digital cable TV in line with J.83/A/B/C and analog cable TV.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.