1. everything RF
  2. RF Newsletters
more
PREV 7 Sept, 2016 NEXT

New RF & Microwave Products this Week

7 Sept, 2016 - everything RF Newsletter
 
everything RF
Date: 7 Sept, 2016
 
Sponsored by Digikey
 
 
 
New RF & Microwave Products this Week
RF Switch
SPDT Switch from 9 kHz to 30 GHz

RF Switch from Analog Devices

The ADRF5021 from Analog Devices is a SPDT switch that operates from 9 kHz to 30 Ghz. It has low insertion loss of 2 dB and a high isolation of 60 dB. This switch can handle upt to 24 dBm of power and requires dual supply voltages of +3.3 V and -2.5 V. It provides a CMOS/LVTTL logic-compatible control.
 
Download Datasheet | Product Details
 
Antenna
2x2 MIMO 90° Sector Antenna from 4.4 to 5.0 GHz

Antenna from Southwest Antennas

The 1009-027 from Southwest Antennas is a 2x2 MIMO 90° sector antenna that operates from 4.4 to 5.0 GHz with a gain of 16 dB. Its rugged construction and UV stable housing make it ideal for use outdoors in harsh environments. The antenna can handle up to 50 watts of power. Its elevation angle downtilt can be adjusted between 0 and 15 degrees with n included pole mounting kit.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
16 Port Vector Network Analyzer from 100 kHz to 20 GHz

Vector Network Analyzer from Rohde & Schwarz

The R&S ZNBT20 is a vector network analyzer that enables users to characterize devices under test with multiple test ports. This particular analyzer has 16 ports which enables production lines to maintain high throughput by measuring multiple DUTs in parallel.
 
Download Datasheet | Product Details
 
RF Switch
Multi-Throw Coaxial Switches from DC to 40 GHz

RF Switch from Teledyne Relays

The CCT-49K Series from Teledyne are latching multi-throw, electromechanical coaxial switches designed to switch a microwave signal from a common input to any of 3, 4, 5, or 6 outputs. The switches operate from DC to 40 GHz, are internally terminated and have 2.92 mm high performance connectors which are matched to 50 ohms.
 
Download Datasheet | Product Details
 
RF Module
Embedded Bluetooth Low Energy & NFC Module

RF Module from Panasonic Corporation

The PAN1761 from Panasonic is an RF module that supports both BLE 4.1 and NFC (NFC Forum Type 3 compliant tag), based on leading edge Toshiba SOC. It has an integrated 2.4 GHz antenna and requires an external NFC antenna. The module has an unique configuration that allows NFC to wake up BLE from standby mode, which considerably reduces power consumption in standby mode, as NFC consumes very little power.
 
Download Datasheet | Product Details
 
RF Module
LTE Module for Automotive Applications

RF Module from Telit Communications

The LE920A4 LTE Module has been specifically developed for Automotive applications. It supports the latest approved eCall and ERA GLONASS standards for protocols and in-band modem. Each of the product variants supports voice over LTE (VoLTE) with circuit-switch fallback (CSFB) to 3G or 2G aligned with regional requirements.
 
Download Datasheet | Product Details
 
Sponsored by Digikey
IoT Product Selector
Digi-Key IoT Product Selector
Whether you are developing hardware from scratch or looking for your first proof of concept, Digi-Key is the one-stop-shop for the IoT. A wide range of SBCs, wireless connectivity chips and modules, connector and cable options, as well as sensors for any application are available to fit any need. Click here to learn more
 
 
 
Signal Generator
100 MHz to 20 GHz VCO-Based Synthesized Signal Source

Signal Generator from SignalCore

The SC5511A from SignalCore is a compact, high-performance VCO-based synthesized signal source that can generate signals from 100 MHz to 20 GHz. It generates signals with an output power from -30 dBm to 10 dBm with a low phase noise.
 
Download Datasheet | Product Details
 
Directional Coupler
50 dB Dual-Directional Coupler from 20 to 1000 MHz

Directional Coupler from Werlatone Inc

The C10518 from Werlatone is a bi-directional coupler that operates from 20 to 1000 MHz. It has a coupling value of 50 dB, directivity of over 20 dB and an insertion loss of under 0.2 dB. This coupler can handle up to 250 watts of power and has a VSWR of below 1.30:1. It is available in a module with SMA and N-type female connector options.
 
Download Datasheet | Product Details
 
Directional Coupler
20 dB Directional Coupler from 4.5 to 13.5 GHz

Directional Coupler from UMCC

The DC-M000-20S from UMCC is a 20 dB Directional Coupler that operates from 4.5 to 13.5 GHz. It has a coupling variation of 0.75 dB, directivity of 13 dB, insertion loss of 0.6 dB and can handle up to 50 watts of power. The coupler is available in a module with SMA Connectors. It can be used in both commercial and military applications.
 
Download Datasheet | Product Details
 
Low Pass Filter
3500 MHz LC Low Pass Filter

Low Pass Filter from Anatech Electronics

The AE3500L9196 from Anatech Electronics is a low pass filter with a passband frequency from DC to 3500 MHz. It has an insertion loss under 0.7 dB, return loss of more than 19 dB and a VSWR under 1.25:1. It is available in a module that measures 0.75 x 0.50 x 0.40 inches with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
2 to 9 GHz Driver Amplifier

RF Amplifier from Custom MMIC

The CMD232C3 from Custom MMIC is a driver amplifier that operates from 2 to 9 GHz. This driver amplifier provides a gain of 15 dB, P1dB of 17 dBm and IP3 of 23 dBm. It requires a single supply voltage from 5-6 V and draws a current of 90 mA. The CMD232C3 is available in a 3x3 mm leadless surface mount package that is matched to 50 ohms at the input and output ports.
 
Download Datasheet | Product Details
 
RF Duplexer
Compact Surface Mount Duplexer for LTE Applications

RF Duplexer from Qorvo

The HP-AS2-500 from Qorvo is a duplexer for LTE band-1 with pass band frequencies from 1920 to 1980 MHz and 2110 to 2170 MHz. It has an insertion loss of under 3.8 dB and a return loss of 7.1 dB. The duplexer can handle up to 29 dBm of power and has a channel isolation of 51 dB.
 
Download Datasheet | Product Details
 
Transceiver
Multi-Channel FSK/FM/ASK Transceiver from 27 to 930 MHz

Transceiver from Melexis

The Melexis TH71221 is a single chip FSK/FM/ASK transceiver IC that operates from 300 to 930 MHz. It has been designed to operate in low-power multi-channel programmable or single-channel stand-alone, half-duplex data transmission systems. In a programmable user mode, the transceiver can operate down to 27 MHz by employing an external voltage-controlled oscillator (VCO) varactor diode.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Noise Amplifier from 2 to 18 GHz

RF Amplifier from ERZIA

The ERZ-LNA-0200-1800-30-2 from ERZIA is a Low Noise Amplifier that operates from 2 to 18 GHz covering S ,C, X and Ku Bands. It provides a gain of 30 dB with a noise figure of under 2 dB and provides 15 dBm of saturated power. The amplifier is available in a compact module with SMA Connectors. It is ideal for a number of applications including Industrial, SATCOM, Space and Military.
 
Download Datasheet | Product Details
 
RF Amplifier
Bi-Directional Amplifier from 30 to 3000 MHz

RF Amplifier from Triad RF Systems

The TTRM1010 from Triad RF Systems is a Bi-directional amplifier that operates from 30 to 3000 MHz. It delivers an output power of above 33 dBm with a gain of more than 19 dB and has a switching time of under 2 uS. The amplifier is capable of supporting any signal type and modulation format, including but not limited to 3-4G telecom, WLAN, OFDM, DVB, and CW/AM/FM.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.