1. everything RF
  2. RF Newsletters
more
PREV 19 Sept, 2016 NEXT

Latest RF News & White Papers this Week

19 Sept, 2016 - everything RF Newsletter
 
everything RF
Date: 19 Sept, 2016
 
Sponsored by Signal Hound
 
 
 
Top RF Stories this Week
Thin & Light Nanomaterial to Contain Electromagnetic Radiation - Drexel University
Ka-Band GaN BUC for NextGen Satellite Data Communications - SAGE SatCom
Rugged, Portable SATCOM Terminal to Operate Across the WGS Constellation - Tampa Microwave
R&S Demonstrates 5G Signal Generation and Analysis - Rohde & Schwarz
u-blox GNSS Module used in System for Protecting India’s Forests and Wildlife - u-blox
RF Interference Detection and Analysis Solution for Multiple GNSS Standards - Spirent
TI Launches Low Power, Long Range Wireless MCU with 10 Year Battery Life - Texas Instruments
Ruggedized, Tactical GPS Time and Frequency System - Smiths Microwave
Ultra-Low Phase Noise PLL for Commercial Space Applications - e2v
New Family of Amplifiers for DOCSIS 3.1 Applications - MACOM
Wolfspeed Introduces GaN Devices for C-Band Radar Systems - Wolfspeed
PPI Offers High Q-Ultra Low ESR Capacitors Tested up to 200°C - Passive Plus Inc
More News
Interesting White Papers
Antenna Array Design Choices & Characterization for Millimeter-Wave Beamforming - Rohde & Schwarz
Overcome Wireless Test Challenges - Streamline Measurements, Optimize Designs and Ensure Compliance - Keysight
Reliability Advantages of Modular SSPAs compared to Traveling Wave Tube Amplifiers - Teledyne Paradise Datacom
Overview of Full-Dimension MIMO in LTE-Advanced - Purdue University
Evaluating Power Amplifier Performance for LTE and 802.11ac Designs - LitePoint
More White Papers
Upcoming Event
Event Image
Phased Array 2016

Date: 18 to 21 October, 2016

Location: Waltham, MA, United States

 
More Upcoming events
Sponsored by Signal Hound
Spectrum Analyzer
6 GHz Broadband USB-powered Real-time Spectrum Analyzer Under $3000
The BB60C is a USB-powered real-time Spectrum Analyzer and RF Recorder that operates from 9 kHz to 6 GHz. It has a real-time bandwidth of 27 MHz and a resolution bandwidth of up to 10 MHz. The Signal Hound BB60C is ideal for spectrum monitoring, EMC precompliance testing, and interference hunting.Click to learn more.
 
 
 
Featured Products this Week
RF Switch
High speed SP8T absorptive switch from 0.5 to 40 GHz

RF Switch from Planar Monolithics Industries

The P8T-500M40G-50-T-55-292FF-1 from Planar Monolithic Industries is a high speed SP8T, absorptive switch that operates at a frequency range from 0.5 to 40 GHz and is capable of switching within 50 nsec. The switch has an insertion loss of 10 dB through the band and has an isolation of over 50 dB.
 
Download Datasheet | Product Details
 
RF Connector
2.4mm and 2.92mm Compression-Mount Test Connectors

RF Connector from MOLEX

The Precision Test Connectors from MOLEX consist of 2.4 mm and 2.92 mm compression-mount test connectors that operate up to 50 GHz. Designed with a vertical launch configuration and a unique compression-mount design, customers can create test points virtually anywhere on the PCB, enabling unparalleled design flexibility.
 
Download Datasheet | Product Details
 
Directional Coupler
300 Watt, Low PIM Directional Coupler from 0.698 to 2.7 GHz

Directional Coupler from MECA

The LP725-10-1.700VWWP from MECA is a low PIM directional coupler that operates from 0.698 to 2.7 GHz. This 10 dB Coupler has a directivity of 21 dB and an insertion loss of under 0.2 dB. It can handle up to 300 watts of power and has a VSWR of 1.20:1. The LP725-10-1.700VWWP is ideal for system applications where precise monitoring, external leveling, signal mixing or swept transmission and reflection measurements are desired.
 
Download Datasheet | Product Details
 
Fixed Attenuator
Temperature Variable Chip Attenuators from DC to 12 GHz

Fixed Attenuator from API Technologies - Inmet

The TCAF N09 Series are temperature variable chip attenuators that operate from DC to 12 GHz. The attenuators are designed to vary by -0.009 dB/dB/°C to compensate for temperature induced system gain variation without requiring a bias or control voltage.
 
Download Datasheet | Product Details
 
Wireless Charging Coil
Wireless Charging Coils With 6.3 µH and 24 µH Inductance

Wireless Charging Coil from Abracon LLC

The AWCCA-50N50 series from Abracon are wireless charging coils for transmitter and receiver applications. They have an inductance of 6.3 µH and 24 µH with a Q-factor of up to 163 at 100 kHz. These coils have high permeability shielding to protect sensitive electronics. The wireless charging coils measures 50 x 50 mm and can be used in automotive industry, battery chargers and smart watches.
 
Download Datasheet | Product Details
 
GPS/GNSS Module
Compact Cellular Module for W-CDMA(UMTS) & GPRS/EDGE

GPS/GNSS Module from u-blox AG

The LISA-U2 modules from u-blox provide worldwide coverage with 6-band W-CDMA (UMTS) and quad-band GPRS/EDGE support. They have HSDPA data-rates of up to 21.1 Mb/s (downlink), and HSUPA of up to 5.76 Mb/s (uplink). These modules provide fully integrated access to u-blox positioning products and migration from u-blox SARA, LEON, and other LISA modules is simple.
 
Download Datasheet | Product Details
 
RF Mixer
Waveguide I/Q Mixers from 57 to 100 GHz

RF Mixer from Millitech

The MIQ Series of Waveguide I/Q mixers from Millitech for Radar Receiver applications. They have RF/LO frequency from 57 to 100 GHz and IF Frequency from DC to 15 GHz. The LO port is amplified and spilt in to two mixers (I/Q) with more than 25 dB of isolation. These mixers are available in multiple waveguide sizes - WR-15, WR-12, and WR-10 with 2.92 mm (SMA-compatible) connectors at the In-phase and quadrature IF ports.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Light-weight Cable Assemblies up to 18 GHz

RF Cable Assembly from W. L. Gore & Associates

The GORE-FLIGHT Microwave Assembly, 6 Series is ideally suited for aerospace applications where compact and light weight construction is required. They operate up to frequencies of 18 GHz with a minimal loss of 0.198 dB/ft. The 6 Series has been qualified to the most stringent specifications for airframe assemblies.
 
Download Datasheet | Product Details
 
SATCOM Amplifier System
500 Watt, X-Band SSPAs for Satellite Up-link Applications

SATCOM Amplifier System from Advantech Wireless

The ARMA-4000X Series from Advantech wireless are the solid-state power amplifiers (SSPAs) that operates from 7.9 to 8.4 GHz. They deliver an output power of up to 600 Watts with more than 70 dB of gain and a return loss of 19 dB. The amplifiers are an integrated with a power supply and cooling system.
 
Download Datasheet | Product Details
 
SATCOM Transceiver
C-Band Compact High Power Outdoor Transceiver

SATCOM Transceiver from Agilis

The AAV700 C-Series from Agilis is a C-Band RF Transceiver for satellite communication. It has been designed for voice and data applications supports different modulation formats including BPSK, QPSK, QAM and FM. The transceiver modules consists of a power supply, upconverter, SSPA (Solid State Power Amplifier), down converter and low phase noise synthesizer.
 
Download Datasheet | Product Details
 
Voltage Controlled Oscillator
Voltage Tuned Oscillator from 8 to 12.5 GHz

Voltage Controlled Oscillator from NI Microwave Components

The VTO-10250-44 from NI Microwave Components is a low noise fundamental VCO that operates from 8 to 12.5 GHz. It can be used as a local oscillator or transmitter oscillator for high-frequency communications and radar systems. It has an output power of 10 dBm with a tuning voltage range of 0.5 to 20 V and tuning sensitivity of 2:1. The VCO has a low phase noise of -90 dBc/Hz @ 100 kHz offset.
 
Download Datasheet | Product Details
 
EMF Meter / Antenna
RF Electromagnetic Field Strength Meter from 50 MHz to 3.5 GHz

EMF Meter / Antenna from Extech Instruments

The RF EMF Strength Meter from Extech Instruments monitors high frequency radiation from 50 MHz to 3.5 GHz. It is ideal for locating RF hotspots, wireless network (Wi-Fi) RF detection and detecting microwave leakage. The EMF Meter supports non-directional measurement with a 3-channel (triaxial) measurement probe and can store/recall up to 99 data sets.
 
Download Datasheet | Product Details
 
Horn Antenna
Circular and Rectangular Horn Antennas from 18 GHz to 110 GHz

Horn Antenna from Ducommun

The ACH & ARH Series from Ducommun is a range of circular and rectangular gain horn antennas that operate from 18 GHz to 110 GHz. They are available in multiple waveguide sizes and frequency configurations with gains of 15, 20, 23, and 25 dBiand half power beamwidths of 24, 13, 9, 7 degrees.
 
Download Datasheet | Product Details
 
Front End Module
Multimode Multiband Tx Front-End Module for Quad-Band

Front End Module from Skyworks

The SKY78026 SkyOne™ Multimode Multiband (MMMB) Front-End Module (FEM) supports 2.5G, 3G/4G, TDD-LTE, and CDMA handsets and operates efficiently in GSM, GPRS, EDGE, WCDMA, HSPA, TDD-LTE, and LTE modes. It consists of a GSM800/EGSM900 PA block, a DCS1800/PCS1900 PA block, separate WCDMA blocks operating in the low and high bands, a logic control block for multiple power control levels, and band enable functions in both cellular and UMTS.
 
Download Datasheet | Product Details
 
PIM Analyzer
Multi Band PIM Analyzers well suited for R&D, Production & QA

PIM Analyzer from AWT Global

The PEM42A series from AWT Global are multi-band PIM Analyzers that can do both Passive Intermodulation and S-parameter measurements with a single DUT connection. They use the Agilent’s E5072A ENA series network analyzer to perform S-parameter measurements together with AWT’s PEM42A multi band PIM analyzers.
 
Download Datasheet | Product Details
 
Sponsored by Signal Hound
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.