1. everything RF
  2. RF Newsletters
more
PREV 28 Sept, 2016 NEXT

New RF & Microwave Products this Week

Sept 28, 2016 - everything RF Newsletter
 
everything RF
Date: Sept 28, 2016
 
Sponsored by Inmet (API Technologies)
 
 
 
New RF & Microwave Products this Week
Antenna
Multi-Port, MIMO Antenna for WiFi and GNSS Applications

Antenna from Huber+Suhner

The SENCITY OMNI-S MIMO from Huber+Suhner is a configurable multiband antenna for WiFi MIMO, Cellular/LTE and GNSS applications. This multiband antenna operates from 2.3 to 2.69 GHz, 3.4 to 3.8 GHz and 4.9 to 5.97 GHz delivering a gain of up to 6 dBi. It features four ports making it ideal for use as a 4x4 WiFi MIMO multi-port antenna.
 
Download Datasheet | Product Details
 
Power Sensor
Real-Time USB Power Sensors from 6 kHz to 6 GHz

Power Sensor from Boonton

The RTP4000 Series from Boonton are Real-Time True Average power sensors that operates from 6 kHz to 6 GHZ and 10 MHz to 6 GHz. They deliver a dynamic range from -60 dBm to +20 dBm with a measurement rate of 100,000 measurements per second, with no gaps in signal acquisition and zero measurement latency. These sensors enable accurate capture and measurement of pulsed, modulated and CW signals.
 
Download Datasheet | Product Details
 
Antenna
Embedded GNSS Antenna for Wearable Devices

Antenna from Antenova

The SR4G013 (Beltii) from Antenova is an embedded GNSS antenna for all the public satellite constellations: GPS, GLONASS, BEIDOU and GALLILEO. It delivers a gain of 2.3 dBi with an efficiency of more than 60% and has a return loss of under 8 dB. The antenna has been designed to work over a very small ground plane on a PCB, where it can be placed in the corner, with no ground clearance.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
5-Bit Digital Attenuator from 0.1 GHz to 40 GHz

RF Variable Attenuator from Analog Devices

The HMC-C584 from Analog Devices is a digital attenuator that operates from 0.1 GHz to 40 GHz. This 5-bit attenuator has an attenuation range of 31 dB with an attenuation accuracy of ±1.0 dB. It has an insertion loss of 7 dB and an input IP3 of 43 dBm. The attenuator has removable K-type connectors which can be detached to allow a direct connection of the input/output pins of the module to a microstrip or coplanar circuit.
 
Download Datasheet | Product Details
 
RF Amplifier
Ka Band Power Amplifier from 30 to 40 GHz

RF Amplifier from ERZIA

The ERZ-HPA-3000-4000-32 from Erzia is a Ka Band Power Amplifier that operates from 30 to 40 GHz. It delivers an output power of up to 34 dBm with a gain of more than 16 dB and has a noise figure of below 6.6 dB. This amplifier requires a supply voltage of 9 to 15 Volts and consumes 17 Watts of power.
 
Download Datasheet | Product Details
 
RF Amplifier
31 Watt Power Amplifier from 6.4 to 8.5 GHz

RF Amplifier from Triad RF Systems

The TA1063 from Triad RF Systems is a power amplifier that operates from 6.4 to 8.5 GHz. It delivers an output power of 45 dBm with a gain of more than 44 dB. This amplifier requires a supply voltage of 27 to 29 VDC and consumes up to 4 Amps of current.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
Variable Attenuator
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability. To learn more, download the data sheet.
 
 
 
Up Converter
Multi-Octave RF Upconvertor

Up Converter from NuWaves Engineering

The RF2-3000UCV1 from NuWaves Engineering is a multi-octave RF upconverter that accepts an input signal from 2 MHz to 70 MHz and upconverts it to an output signal from 2 MHz and 3000 MHz with 5 kHz tuning resolution. It provides 50 dB of user-selectable attenuation control and has two IF bandwidth options of 4 MHz and 35 MHz.
 
Download Datasheet | Product Details
 
OCXO
135 mW Crystal Oscillator from 10 to 50 MHz

OCXO from Bliley Technologies

The LP62 from Bliley Technologies is a series of low power ovenized oscillators (OCXOS) that operate from 10 to 50 MHz. The oscillators consume a start-up power of 350 mW and a steady state power of 135 mW at 3.3 VDC. They achieve a low startup power while maintaining a fast warm up of less than one minute.
 
Download Datasheet | Product Details
 
Power Divider
4 Way Power Divider from 10 to 1000 MHz

Power Divider from UMCC

The PD-1000-4S is a 4 way power divider that operates from 10 MHz to 1000 MHz. It can handle up to 10 watts of power with a VSWR of 1.35:1. The power divider has an insertion loss of under 1.2 dB and over 24 dB of isolation. It is available in a module with SMA Female connectors. The PD-1000-4S can be used for both commercial and military applications.
 
Download Datasheet | Product Details
 
Surface Mount Circulator
Surface Mount Circulator from 2500 MHz to 2700 MHz

Surface Mount Circulator from VidaRF

The SMDC-1820-1 from Vida RF is a Surface mount circulator that operates from 2500 to 2700 MHz. This compact high power circulator has an insertion loss of 0.3 dB, Isolation of 23 dB and can handle up to 150 W of power. It has a steel body and is matched to 50 Ohms.
 
Download Datasheet | Product Details
 
RF Amplifier
1 W Distributed Power Amplifier from DC to 22 GHz

RF Amplifier from MACOM

The MAAP-011248 from MACOM is a distributed power amplifier that operates from DC to 22 GHz. It delivers an output power of 1 W with a gain of 13 dB. This amplifier requires a supply voltage of 9 to 12 Volts and consumes 400 mA of current. It is available in a lead-free 5 mm 32-lead AQFN package and is ideally suited for test and measurement, EW, ECM, and radar applications.
 
Download Datasheet | Product Details
 
RF Transistor
GaN HEMT Transistor 1.2 to 1.4 GHz

RF Transistor from Wolfspeed

The CGHV14800 from Wolfspeed is a GaN HEMT that operates from 1.2 GHz to 1.4 GHz. The transistor provides more than 800 W of output power with a gain of 16 dB and efficiency of 65% . It requires a DC supply of 50 V and is matched to 50 ohms at the input and output.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
 
 
 
RF Switch
SP3T Switch from 0.4 to 3.8 GHz

RF Switch from Skyworks

The SKY13582-676LF from Skyworks is a SP3T switch that operates from 0.4 to 3.8 GHz. It has a high isolation of 25 dB at 2.7 GHz and very low insertion loss. This switch is available in a small 9-pin, 1.1 x 1.1 x 0.5 mm QFN package and is ideal for smartphones, data cards and MiFi hotspot applications.
 
Download Datasheet | Product Details
 
RF Duplexer
417 / 427 MHz Ceramic Duplexer

RF Duplexer from Anatech Electronics

The AM417-427D1106 from Anatech is a Ceramic Duplexer with Band 1 from 415 to 420 MHz and Band 2 from 425 to 430 MHz. The Duplexer can handle up to 3 watts of power, has an insertion loss of less than 3.5 dB and isolation of over 35 dB.
 
Download Datasheet | Product Details
 
RF Amplifier
Ultra High Dynamic Range Amplifier from 0.05 to 6 GHz

RF Amplifier from Mini Circuits

The LHA-1H+ from Mini-Circuits is a high dynamic range amplifier that operates from 0.05 to 6 GHz. This amplifier covers primary wireless communication bands including, PCS, LTE, WiMAX and other cellular bands. It has an extremely high IP3 of 41 dB at 2 GHz making it ideal for use in driver amplifiers and secondary amplifiers in high dynamic range receivers.
 
Download Datasheet | Product Details
 
RF Module
ANT SoC Modules for Sports, Fitness and IoT Applications

RF Module from Dynastream Innovations

The D52 series from Dynastream Innovations are RF modules for ANT, Bluetooth low energy and NFC. These modules are Bluetooth 4.2 qualified and are certified for operation in major markets including the U.S., Canada, the European Economic Area, Australia, New Zealand, Japan, and Korea.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.