1. everything RF
  2. RF Newsletters
more
PREV 12 Oct, 2016 NEXT

New RF & Microwave Products this Week

Oct 12, 2016 - everything RF Newsletter
 
everything RF
Date: Oct 12, 2016
 
Sponsored by Keysight
 
 
 
New RF & Microwave Products this Week
Power Sensor
TVAC compliant USB and LAN Power Sensor

Power Sensor from Rohde & Schwarz

The R&S NRP33SN-V from R&S is a Three-Path Diode Power Sensor for TVAC (Thermal Vacum) Applications. In the satellite sector, components, subsystems and entire satellites must be qualified in a thermal vacuum (TVAC) before they can be used in space. This increasingly requires highly accurate, reliable power measurements directly on the DUT, i.e. in a TVAC chamber. Power sensors must therefore not only function in a high vacuum but also be able to withstand certain temperature fluctuations.
 
Download Datasheet | Product Details
 
RF Cable Assembly
High Performance Rugged Cable Assemblies up to 26.5 GHz

RF Cable Assembly from Huber+Suhner

The SUCOFLEX 126 are a series of high performance microwave cable assemblies from Huber+Shuner that operate up to 26.5 GHz. These high performance assemblies can be used to make precise measurements with high phase stability combined with low loss and excellent return loss. They are rugged and can withstand flexure and crushing.
 
Download Datasheet | Product Details
 
Antenna
Omni-Directional Gooseneck Antenna with Integrated Filter

Antenna from Southwest Antennas

The 1001-127 is an Omni-Directional Gooseneck Antenna that operates from 2.1 to 2.5 GHz with an integrated bandpass filter. It provides a gain of 2.15 dB with a VSWR of 2:1 and can handle up to 8 watts of power. The antenna has a 360 degree horizontal beamwidth and 78 degree vertical beamwidth.
 
Download Datasheet | Product Details
 
Power Divider
30 W, 3-Way Power Divider from 2 to 18 GHz

Power Divider from VidaRF

The VPD-20180A3 from VidaRF is a 3-Way power divider that operates from 2 to 18 GHz. It can handle up to 30 watts of power and has an isolation of more than 20 dB, an insertion loss of under 1.6 dB. The divider is available in a module with SMA Female connectors.
 
Download Datasheet | Product Details
 
90 Degree Hybrid Coupler
90 Degree Hybrid Coupler from 1 to 12 GHz

90 Degree Hybrid Coupler from MCLI

The HB-57 from MCLI is a 90 Degree Hybrid that operates form 1 to 12 GHz. This hybrid coupler can handle up to 50 watts of average power and up to 2 kW of peak power. It has an insertion loss of less than 1.6 dB and isolation over 15 dB. The HB-57 is available in a module with SMA Connectors.
 
Download Datasheet | Product Details
 
RF Mixer
I/Q MMIC Diode Mixer with Output from 92 to 96 GHz

RF Mixer from Arralis

The TU-W1340310 from Arralis is an I/Q MMIC diode mixer with integrated quadrature coupler for single sideband upconverter operation. It has been designed for output frequencies from 92 to 96 GHz using either fixed IF and varying LO (86GHz & 90GHz) or fixed LO and varying IF (2GHz & 6GHz) signals.
 
Product Details
 
Sponsored by Keysight
Keysight Compliance
Testing of Wireless Designs to Ensure Compliance
The test process for complete wireless systems, subsystems, and components is very complex. Ensuring successful testing from design optimization, troubleshooting, and validation through wireless standards compliance requires a comprehensive test approach. Download this Keysight application article today.
 
 
 
RF Amplifier
MMIC Power Amplifier from 89 to 93 GHz

RF Amplifier from Arralis

The TU-W1330305 from Arralis is a RF Amplifier that operates in the W-Band from 89 to 93 GHz. This 4-Stage MMIC Amplifier provides up t0 19 dBm of power with 20 dB flat, stable gain. It requires a 4 V Supply and draws only 210 mA of current making for very low power consumption.
 
Download Datasheet | Product Details
 
RF Mixer
Triple Balanced Surface Mount Mixer from 1 to 3500 MHz

RF Mixer from Synergy Microwave Corporation

The STM-3500 is a triple balanced surface mount mixer with RF/LO/IF Frequency from 1 to 3500 MHz. it can be used for both up-conversion and down-conversion applications with high interport isolation. The mixer has a conversion loss below 10.5 dB and LO/RF Isolation above 30 dB.
 
Download Datasheet | Product Details
 
RF Amplifier
14.4 to 15.5 GHz, 4 Watt Ku-Band SSPA

RF Amplifier from Triad RF Systems

The TA1149 is an SSPA designed for Ku band UAV data and video links for both GCS and air vehicle installation. It operates from 14.4 to 15.5 GHz and provides an output power of 4 watts with a gain of 43 dB and switching speed of 1 uS. The amplifier requires a 12 V supply with a draws 1.5 Amps of current. The amplifier can be used for both military and commercial applications.
 
Download Datasheet | Product Details
 
RF Amplifier
0.01 to 20 GHz Power Amplifier Module

RF Amplifier from Analog Devices

The HMC-C582 is a MMIC power amplifier that operates from 0.01 to 20 GHz. This pHEMT amplifier has been developed for electronic warfare (EW), electronic countermeasures (ECM), radar, fiber optic, and test equipment applications. It provides a gain of 24 dB with an output IP3 of 36 dBm and P1dB of 26 dBm.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Noise Differential Amplifier for DOCSIS 3.1 Applications

RF Amplifier from MACOM

The MAAM-011163 from MACOM is a low noise differential RF amplifier that operates from 5 to 1218 MHz. The amplifier provides an output power of 25 dBm with a gain of 19 dB and a low noise figure. It is based on a differential push-pull topology that provides excellent 2nd order intermodulation performance.
 
Download Datasheet | Product Details
 
RF Amplifier
1 kW Solid State Pulsed Power Amplifier from 9 to 9.8 GHz

RF Amplifier from API Technologies

The QBS-609 is a pulsed power GaN power amplifier that operates from 9 to 9.8 GHz. This solid state amplifier has been designed to replace traveling tube modules in the X-Band. It has been developed for Military and Commercial Radar Applications. The amplifier has a high efficiency of 20% with a 100 usec pulse width and 10% duty cycle.
 
Download Datasheet | Product Details
 
Sponsored by Keysight
Keysight
Testing of Wireless Designs to Ensure Compliance
The test process for complete wireless systems, subsystems, and components is very complex. Ensuring successful testing from design optimization, troubleshooting, and validation through wireless standards compliance requires a comprehensive test approach. Download this Keysight application article today.
 
 
 
RF Amplifier
Ultra Low Noise Bypass LNA from 700 to 4000 MHz

RF Amplifier from Qorvo

The TQL9063 from Qorvo is an ultra Low Noise Bypass LNA that operates from 700 to 4000 MHz. At 1.95 GHz this LNA provides 19 dB of gain, with 36.3 dBm IP3 and a noise figure of 0.7 dB while drawing only 77 mA of current from a 5 V supply.
 
Download Datasheet | Product Details
 
RF Transistor
GaN HEMT Transistor 1.2 to 1.4 GHz

RF Transistor from Wolfspeed

The CGHV14800 from Wolfspeed is a GaN HEMT that operates from 1.2 GHz to 1.4 GHz. The transistor provides more than 800 W of output power with a gain of 16 dB and efficiency of 65% . It requires a DC supply of 50 V and is matched to 50 ohms at the input and output.
 
Download Datasheet | Product Details
 
RF Module
Compact and Powerful Bluetooth Smart SoC

RF Module from Silicon Labs

The EFR32 Blue Gecko Bluetooth Smart SoCs are low energy modules for the Bluetooth 4.2 specification. They consist of a complete low energy radio with integrated radio, MCU, Memory and Energy Management solutions. The radio has a sensitivity of -94 dBm and an integrated Balun and power amplifier which provide an output power of 19.5 dBm.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is the leading website for the RF & Microwave industry. We keep users up to date with the latest industry news, upcoming events and new product releases. Use the parametric search tools to find products based on your specifications from over 1000 manufacturers listed in our database.