Sponsored by Aeroflex / Inmet | |
|
 New RF and Microwave Products this Week |
|
|  | Vector Network Analyzer from Anritsu The VectorStar ME7838D broadband vector network analyzer provides broadband frequency coverage from 70 kHz to 145 GHz in a single sweep using a coaxial test port. It enables design engineers to perform on-wafer device characterization at 70 GHz and beyond, including applications such as 77 GHz car radar, E band wireless communications, 94 GHz remote sensing and airport radar, as well as emerging applications above 110 GHz. Download Datasheet | Product Details
|
| | |
|
|  | RF Switch from Skyworks The SKY12215-478LF from Skyworks is a silicon PIN diode, transmit/receive, SPDT switch which operates from 900 MHz to 4 GHz. It can handle up to 500 W of power, has an insertion loss of 0.4 dB and an isolation of 43 dB. It is ideal for telecommunication systems such as WiMAX, TD-SCDMA, or LTE base stations applications. The switch is available in a 16-pin quad flat no-lead (QFN) package which measures 4 x 4 mm. Download Datasheet | Product Details
|
| | |
|
|  | RF Mixer from HXI The HBM series are broadband waveguide mixers that operate from 18 to 110 GHz. They utilize a low loss structure mated to a matched pair of GaAs Schottky beam lead diodes for minimum conversion loss and maximum bandwidth. This series of mixer have excellent LO noise suppression and LO-RF isolation values are inherent design features. Download Datasheet | Product Details
|
| | |
|
|  | RF Mixer from Custom MMIC The CMD179 is a fundamental double balanced mixer in die that operates from 16 to 26 GHz. The mixer has a conversion loss of 7 dB, an LO to RF isolation of greater than 40 dB, an IF bandwidth of 8 GHz, and an input IP3 of 18 dBm. It has very high suppression of spurious products due to the ultra small, optimized balun structures. Download Datasheet | Product Details
|
| | |
|
Sponsored by Aeroflex / Inmet |  | If a full hex attenuator better fits your specifications, look no further Aeroflex / Inmet is pleased to introduce a more user friendly version of our most popular 2W SMA attenuator; a full hex (FH) body configuration helps minimize the possibility of the attenuator rotating during installation by providing the technician with increased surface by which to secure the device. The same outstanding performance is now available in the Models 6FH (6GHz) and 18FH (18GHz). Standard attenuation values include 0-10, 12, 15, 20, 30 & 40dB. Similarly, our new FHC model is available for production volume 6 GHz applications at slightly reduced electrical performance and lower cost. |
|
|
|  | Front End Module from Triquint The TQP8080 is an integrated WLAN front-end module for 802.11a/n/ac applications. It consists of a power amplifier, power detector, SPDT switch and low noise amplifier with bypass mode. This FEM has been optimized for integration into high throughput devices and provides stable performance across a wide temperature and voltage range. It features CMOS compatible control voltages to facilitate ease of use. Download Datasheet | Product Details
|
| | |
|
|  | RF Cable Assembly from VidaRF The CA-5000-33B-XX series are Low PIM cable assemblies that operate from DC to 3 GHz with a PIM of less than -156 dBc. This cable assemblies are available with a RG402 cable and 7/16 Male connectors on either side. Multiple connector types and cable length options are available. Download Datasheet | Product Details
|
| | |
|
|  | RF Cable Assembly from HASCO Components The HLL142 Series of armored cable assemblies operates up to 18 GHz with low loss and excellent phase stability vs flexure and temperature. This series is RoHS compliant and has an insertion loss of 0.48 dB per ft. at 18 GHz. They have a capacitance of 25 pF/ft, can handle power up to 510 W and are available with SMA and N Type connector options. Download Datasheet | Product Details
|
| | |
|
|  | Fixed Attenuator from MECA The LPAR50-dB-11WWP is a series of low PIM Attenuators from MECA that operate from 0.689 to 2.7 GHz. They are available in multiple attenuation configurations - 15 dB, 20 dB, 30 dB and 40 dB. The attenuators can handle up to 50 W of average power and 2.5kW of peak power. The LPAR50-dB-1WWP attenuator series are available with 7/16 DIN connectors. Download Datasheet | Product Details
|
| | |
|
|  | Power Amplifier from Ophir RF The 5228 is a 1000 Watt broadband amplifier that operates from 80 to 1000 MHz. This amplifier utilizes Class A Ultra linear power devices that provide an excellent efficiency, 3rd order intercept point, high gain, and a wide dynamic range. The 5228 comes with an extended multi-year warranty backed by OPHIR RF commitment to total customer satisfaction. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Triquint The TAT7460B1A is a 75 Ohm RF Amplifier designed for use in Satellite and CATV applications from 50 to 2600 MHz. It has flat gain of 17 dB through the band with 0.35 dB of deviation and a noise figure of 3 dB up to 1600 MHz. It requires a 5 V supply and draws 100 mA of current. The TAT7460B1A has been developed on using a six inch GaAs pHEMT technology to optimize performance and cost. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from RFHIC The TG520-10 from RFHIC is a GaN, hybrid, power amplifier which operates from 30 to 520 MHz. It provides up to 39 dBm of power (P1dB), a gain of 16 dB requires a 28 V supply. The amplifier module is designed for TETRA (Terrestrial Trunked Radio) applications. It is housed in a surface mount package which measures 15 x 10 x 5.4 mm. Download Datasheet | Product Details
|
| | |
|
|
|  | Power Divider from RF Industries The RFPS-4-NF is a 3 way low PIM power divider that operates from 698 to 2700 MHz. It can handle up to 300 W of average power and up to 1 kW of peak power. The divider has an insertion loss of less than 0.3 dB, a split loss of 6 dB, a VSWR of less than 1.3:1 and a PIM of less than -155 dBc. The RFPS-4-NF has been developed for Distributed Antenna System (DAS) applications and is available with N Type female connectors. Download Datasheet | Product Details
|
| | |
|
|  | Power Divider from Aeroflex - Inmet The PD1516-N2 is a 2 way Power Divider for GPS applications that operates from 1.5 to 1.6 GHz. It can handle up to 1 W of power, has an insertion loss of 3.31 dB and isolation of over 20 dB. The power divider is matched to 50 ohms with a VSWR of 1.2:1 and has N Type nickel plated brass connectors. Download Datasheet | Product Details
|
| | |
|
|  | Power Divider from Renaissance Electronics Corporation The 10A4NAS-2S-1 is a 2 way power divider for GPS applications that operates from 1.2 to 1.6 GHz. It has been designed as a unity gain GPS splitter that passes DC on one output port and 200 ohm DC load on the other to simulate antenna current draw for receivers. It is designed for UAV applications with compact size, light weight and draws less than 10 mA of DC current. Download Datasheet | Product Details
|
| | |
|
