1. everything RF
  2. RF Newsletters
more
PREV 23 Nov, 2016 NEXT

New RF & MW Products this Week

Nov 23, 2016 - everything RF Newsletter
 
everything RF
Date: Nov 23, 2016
 
Sponsored by Inmet (API Technologies)
 
 
 
New RF & Microwave Products this Week
RF Connector
6 GHz Low PIM 4.3/10 Connectors

RF Connector from Amphenol RF

Amphenol RF has devloped a series of Low PIM 4.3/10 Connectors that offer excellent VSWR performance up to 6 GHz. This new connector type is smaller and up to 40% lighter than 7/16 DIN connectors allowing them to be used in higher density applications. The connectors are available with Panel Receptacles, Panel Mount Cable Jacks and as cable mount plugs that support different cable types.
 
Download Datasheet | Product Details
 
Antenna
PCB Antenna for 2.4 & 5 GHz Dual Band WiFi

Antenna from Pulse Electronics

The SH0319E from Pulse Electronics is a ready-to-use, wireless printed circuit board antenna for laptops, tablets, mobile devices, and devices that operate in a similar environment. This Wi-Fi antenna covers both the 2.4 GHz and 5 GHz bands and provides a gain of up to 4.9 dBi with an efficiency of 67%.
 
Download Datasheet | Product Details
 
RF Amplifier
100 W GaN Linear Power Amplifier from 0.7 to 2.7 GHz

RF Amplifier from Pasternack Enterprises Inc

The PE15A5033F from Pasternack is a GaN Linear Power Amplifier that operates from 0.7 to 2.7 GHz. It provides a saturated output power of 100 Watts with a gain of more than 45 dB and has an efficiency of 30%. The amplifier requires a power supply of 30 V DC and has a switching time of up to 5 usec.
 
Download Datasheet | Product Details
 
RF Switch
1 to 6 GHz SPDT Switch for WLAN Applications

RF Switch from Skyworks

The SKY13592-689LF is a SPDT switch that operates from 1 to 6 GHz intended for mode switching in WLAN applications. Using advanced switching technologies, the switch maintains a low insertion loss and high isolation. It also delivers high-linearity performance, making it an ideal choice for low-power transmit/receive applications.
 
Download Datasheet | Product Details
 
SATCOM Transceiver
Compact & Light Weight 5 W Ka-Band Transceivers

SATCOM Transceiver from Agilis

The AAV110 Series from Agilis are small, light weight Ka-Band transceivers that are ideal for mobile and satellite uplink & downlink applications. They have a Tx frequency from 29.5 to 30 GHz and Rx frequency from 19.2 to 20.2 GHz. These device provides an output power of up to 5 W at the Tx with a gain of 65 dB. Designed to be mounted on the feed horn, the Transceiver has excellent efficiency.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
Multi-Output Frequency Synthesizer with 800 MHz / Dual 16 GHz Outputs

Frequency Synthesizer from EM Research

The THOR-16000-XA from EM Research is a multi-output frequency synthesizer with fixed outputs of 2 x 16 GHz and 1 x 800 MHz. The signals can have a power level of 10 dBm with harmonics below -20 dBc and spurious suppression under -60 dBc. The synthesizers have an isolation of more than 40 dB between outputs and a low phase noise of 94 dBc/Hz @ 100 KHz.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
Variable Attenuators
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability. To learn more, download the data sheet.
 
 
 
Frequency Synthesizer
Single Slot PXI Frequency Synthesizer from 250 MHz to 16 GHz

Frequency Synthesizer from Micro Lambda Wireless, Inc.

The MLMS-Series from Wireless Lambda are PXI frequency synthesizers that operate from 250 MHz to 6 GHz, 2 to 8 GHz, 6 to 13 GHz and 8 to 16 GHz. This series of miniature frequency synthesizers have been designed to fit within a single slot PXI chassis and has a 9 pin molex connector for all input voltages and signals as well as a standard USB mini-b connector.
 
Product Details
 
Wireless Charging Coil
High Q, Thin and Light Wireless Charging Coils for Compact Devices

Wireless Charging Coil from MOLEX

The PowerLife Wireless Power Coils from MOLEX are developed using NuCurrent Technology. These coils provide high power transfer efficiency (Q) with an extreamly thin and small form factor making them ideal for use in smartphones, tablets and wearable devices.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Noise Amplifier from 12.5 to 30 GHz

RF Amplifier from ERZIA

The ERZ-LNA-1250-3000-25-2.5 from Erzia is a Low Noise Amplifier that operates from 12.5 to 30 GHz. It delivers an output power of 14 dBm with a gain of 25 dB and has a noise figure of 2.8 dB. The amplifier requires a supply voltage of 12 V and consumes 40 mA of current.
 
Download Datasheet | Product Details
 
Limiter
6 dBm, 12 dBm and 40-41 dBm Power Limiters from 0.1 to 50 MHz

Limiter from Huber+Suhner

The 9078 Series of power limiters from Huber+Suhner operates from 0.1 to 50 MHz. This series has power limiters with threshold level configurations of 6 dBm, 12 dBm and 40-41 dBm. They can handle a peak power of up to 67 dBm and have an insertion loss of below 0.7 dB with a response time of less than 100 ns.
 
Download Datasheet | Product Details
 
RF Amplifier
C-Band Power Amplifier with 20 Watt Output

RF Amplifier from NuWaves Engineering

The NuPower 06D05A is a C-Band Power Amplifier that operates from 4.4 to 4.9 GHz. This GaN SSPA delivers over 20 watts of RF power to boost signal power levels of data links and transmitters for communications range extension, electronic warfare (e.g. electronic attack), etc.
 
Download Datasheet | Product Details
 
RF Amplifier
PA Module for Wi-Fi 802.11a/n/ac Applications

RF Amplifier from Qorvo

The RFPA5552 from Qorvo is a three-stage power amplifier (PA) module designed for Wi-Fi 802.11a/n/ac systems. The PA operates from 4.9 to 5.925 GHz providing an output power of up to 24 dBm with a gain of 32 dB. The module integrates a 5 GHz power amplifier (PA), a regulator and a logarithmic power detector which enables power control across the entire power spectrum for applications which use higher gain antennas or end users wanting to reduce device calibration time in production.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
 
 
 
RF Variable Attenuator
5-Bit Digital Attenuator from 0.1 to 33 GHz

RF Variable Attenuator from Analog Devices

The HMC939ALP4E from Analog Devices is 5-Bit digital attenuator that operates from 0.1 to 33 GHz. It has an attenuation range of 31 dB with an attenuation accuracy of ±0.4 dB. The attenuator bit values are 1 dB (LSB), 2 dB, 4 dB, 8 dB, 16 dB for a total attenuation of 31 dB. It has an insertion loss under 5 dB and an input IP3 of 43 dBm.
 
Download Datasheet | Product Details
 
RF Mixer
GaAs Double-Balanced Mixer from 4.5 GHz to 24 GHz

RF Mixer from Marki Microwave

The MM1-0424S from Marki Microwave is a passive GaAs double balanced MMIC mixer with an RF/LO frequency from 4.5 GHz to 24 GHz and IF frequency from DC to 4 GHz. The mixer features an excellent conversion loss, isolation and spurious performance across its broad bandwidth. It is available as a wire bondable chip that measures 0.058” x 0.046” x 0.004” or as an SMA connectorized module.
 
Download Datasheet | Product Details
 
GPS/GNSS Module
GNSS Modules for GPS, GLONASS, SBAS and QZSS Signals

GPS/GNSS Module from u-blox AG

The MAX-7 series of GNSS modules from u-blox receives GPS, GLONASS, SBAS and QZSS signals. This cost-efficient series delivers a high sensitivity of -161 dBm with minimal acquisition time in an ultra-compact form factor. These modules have a high level of integration capability with flexible connectivity options and are available in a 18 pin LLC (Leadless Chip Carrier) package measuring 9.7 x 10.1 x 2.5 mm.
 
Download Datasheet | Product Details
 
PXI RF Signal Transceiver
PXI Vector Transceiver from 60 MHz to 6 GHz

PXI RF Signal Transceiver from Keysight Technologies

The M9421A from Keysight Technologies is a VST PXIe Vector Transceiver that consists of a vector signal generation and analysis in four slots of a PXI Chasis. The VST is purpose-built for rapid solution creation and faster throughput in manufacturing test of wireless components , power amplifiers, and RF front-end modules. It operates from 60 MHz to 3.8/6 GHz and provides a 160 MHz I/Q bandwidth in both vector signal generation and analysis.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.