1. everything RF
  2. RF Newsletters
more
PREV 7 Dec, 2016 NEXT

New RF & Microwave Products this week

Nov 7, 2016 - everything RF Newsletter
 
everything RF
Date: Nov 7, 2016
 
Sponsored by Inmet (API Technologies)
 
 
 
New RF & Microwave Products this Week
RF Switch
75 Ohm SPDT Switch for DOCSIS 3.1 Applications

RF Switch from Integrated Device Technology

The F2970 is a rugged, low insertion loss, 75 ohm SPDT absorptive RF switch designed for wide range of CATV and Broadband RF applications including the new DOCSIS 3.1 standard. The F2970 delivers high linearity across a wide frequency range of 5 MHz to 3000 MHz, allowing the switch to be used in both the upstream and downstream signal chains throughout a CATV network.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Low Loss Microbend Coaxial Cable Assembly from DC to 85 GHz

RF Cable Assembly from Huber+Suhner

The Microbend L from Huber+Suhner is an enhanced, low loss microbend coaxial cable assembly that operates from DC to 85 GHz. It has increased phase stability and power handling capacity which is designed for use in low profile, internal, point-to-point interconnections between RF modules within communications systems.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
2 to 31 GHz Voltage Variable Attenuator

RF Variable Attenuator from Qorvo

The TGL2767–SM is a voltage variable attenuator that operates from 2 to 31 GHz. It has an attenuation range of over 20 dB with a control voltage from 0 to 1.5 V. The attenuator has an insertion loss of less than 2 dB. Its wideband frequency range allows it to be used for a number of radar and communication bands, as well as electronic warfare, instrumentation and other general RF–based applications.
 
Download Datasheet | Product Details
 
RF Module
WiFi / Bluetooth Combo Module for Medical and Fitness Applications

RF Module from Amped RF

The WB51 from Amp'ed RF is a Tri-Mode Wi-Fi, BLE and Classic BT wireless Module. The Wi-Fi radio supports 802.11 b/g/n and Wi-Fi direct. This module is ideal for IoT devices and works with multiple ecosystems offered from Apple, Google and Amazon. The three radios can work concurrently using either the internal antenna or an optional external antenna.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Wideband Signal Analysis Solution for Radar/EW Design and Spectrum Management

RF Spectrum Analyzer from Tektronix, Inc.

The RSA7100A wideband signal analysis solution from Tektronix provides 800 MHz of real-time bandwidth with up to 2 hours of streaming storage at full bandwidth in a single solution. It covers a broad frequency range from 16 kHz to 26.5 GHz for critical wide-bandwidth applications. The RSA7100A reduces the cost of wideband signal capture, record, and analysis while increasing the likelihood of capturing wideband signal transients.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
9 kHz to 44.5 GHz Spectrum/Signal Analyzer with Built-in Preamp Option

RF Spectrum Analyzer from Anritsu

The MS2840A is a spectrum/signal analyzer from Anritsu that supports measurements across a wide frequency band from 9 kHz to 44.5 GHz with built-in preamp option. It eliminates image-response effects at wideband signal measurements and supports millimeter-wave wideband wireless applications, such as wireless backhaul, automobile radar, WiGig, etc.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
Variable Attenuators
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability. To learn more, download the data sheet.
 
 
 
Power Divider
30 Watt, 32-Way Power Divider from 2 to 18 GHz

Power Divider from VidaRF

The VPD-20180A32 from VidaRF is a 32-way power divider that operates from 2 to 18 GHz. It has an insertion loss of less than 6 dB, an isolation of under 15 dB and can handle up to 30 watts of power. This model also provides high port to port isolation and low amplitude/phase balance. It is available as a module with SMA Connectors and is IP65 compliant.
 
Download Datasheet | Product Details
 
Power Divider
6 Way Power Divider from 20 to 18 GHz

Power Divider from Werbel Microwave

The 6P0218 from Werbel Microwave is a 6-Way power divider that operates from 2 to 18 GHz. It has an inertion loss of 2.5 dB and isolation of 18 dB through the band with an amplitude balance of 0.5 dB and phase balance of 10 degrees. The power divider is matched to 50 ohms.
 
Product Details
 
RF Amplifier
Low Noise Amplifier from 1 to 27 GHz

RF Amplifier from ERZIA

The ERZ-LNA-0100-2700-45-4 from ERZIA is a low noise amplifier that operates from 1 to 27 GHz. It delivers an output power of more than 17.5 dB with a gain of up to 47 dB and has a noise figure of under 5.2 dB. The amplifier requires a supply voltage of 9 to 15 V and consumes up to 3.4 watts of power. It is available in a module with 2.92 mm female connectors and is ideal for satcom, telecom, space and aerospace applications.
 
Download Datasheet | Product Details
 
Termination
2.4mm Male Termination from DC to 50 GHz

Termination from Centric RF

The C502 from CentricRF is a 2.4 mm Male Termination that operates up to 50 GHz. It is matched to 50 ohms and can handle up to 0.5 watts of average power and has a VSWR of 1.3:1. The termination has a peak power rating of 100 watts with a 1 micro second pulse width and 1% duty cycle.
 
Download Datasheet | Product Details
 
GPS/GNSS Module
Ultra-Compact GNSS Module with Integrated Antenna

GPS/GNSS Module from u-blox AG

The SAM-M8Q is an ultra-compact GNSS module with an integrated antenna. This module will speed time to market for system developers of GNSS applications who have limited experience in RF and antenna design. Housed in a tiny 15.5 x 15.5 x 6.3 mm package, this module can be easily embedded in small devices that require location information, such as asset tracking and telematics systems, and generic automotive after-market applications.
 
Download Datasheet | Product Details
 
Antenna
Embedded GNSS Antenna for Wearable Devices

Antenna from Antenova

The SR4G013 (Beltii) from Antenova is an embedded GNSS antenna for all the public satellite constellations: GPS, GLONASS, BEIDOU and GALLILEO. It delivers a gain of 2.3 dBi with an efficiency of more than 60% and has a return loss of under 8 dB. The antenna has been designed to work over a very small ground plane on a PCB, where it can be placed in the corner, with no ground clearance.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
 
 
 
Band Pass Filter
450 W Cavity Band Pass Filter from 4395 MHz to 4955 MHz

Band Pass Filter from Anatech Electronics

The AB4675B1348 from Anatech Electronics is a cavity band pass filter with a pass band from 4395 MHz to 4955 MHz. It has an insertion loss of less than 1.5 dB and an attenuation of more than 40 dB at 4100 & 5250 MHz. The filter can handle up to 450 W of power and has a VSWR of under 1.5:1. It is available in a module that measures 5.73 x 1.50 x 0.99 inches with SMA female connectors.
 
Download Datasheet | Product Details
 
Band Pass Filter
2.5 W Bandpass Filter from 1580 MHz to 2200 MHz

Band Pass Filter from Mini Circuits

The BFCN-1860+ from Mini Circuits is a bandpass filter that operates from 1580 MHz to 2200 MHz. It has an insertion loss of 2 dB and an upper/lower stopband rejection of 20 dB. The filter can handle up to 2.5 W of power and provides a wide operating temperature range from -55 to +100 Degrees C.
 
Download Datasheet | Product Details
 
PXI Digitizer
Modular 8-bit PXIe Digitizers for Wideband Applications

PXI Digitizer from Spectrum

The new M4x.22xx series of PXIe-based (PXI Express) 8 bit high-speed digitizers from Spectrum Instrumentation include modules that offer one, two or four fully synchronous channels. Each channel is equipped with its own analog-to-digital converter (ADC), with real-time signal sampling at rates from 1.25 GS/s to 5 GS/s, and scope-like signal conditioning circuitry that allows programming of parameters such as input gain, signal offset and coupling.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.