1. everything RF
  2. RF Newsletters
more
PREV 25 Jan, 2017 NEXT

New RF & Microwave Products this Week

25 Jan, 2017 - everything RF Newsletter
 
everything RF
Date: 25 Jan, 2017
 
Sponsored by MECA
 
 
 
New RF & Microwave Products this Week
Microwave Backhaul Radio Links
80 GHz Millimeter Wave Radio Delivering Up to 5.35 Gbps Capacity

Microwave Backhaul Radio Links from BridgeWave

The Flex4G-5000 from BridgeWave Communications is an E-band (70/80 GHz) microwave backhaul with 12” (30 cm) or 24" (60 cm) Antenna. This backhaul solution is available in two models: the Flex4G-5000 ANSI and Flex4G ETSI. The ANSI system delivers up to 5.35 Gbps full duplex capacity per radio, and is scalable to 10.7 Gbps in a 2+0 configuration; the ETSI system delivers 4.7 Gbps full duplex throughput per radio and scales to 9.4 Gbps in a 2+0 configuration.
 
Download Datasheet | Product Details
 
Transceiver
25 W Ku-Band High Power Transceiver

Transceiver from TRAK Microwave Corporation

The Ku-Band High Power Transceiver from TRAK Microwave functions as a complete airborne Satcom solution. It integrates a GaN SSPA, upconverters, downconverters, and digital control technology and multiple Built-in-Test (BIT) functions. The HPT has a transmit frequency from 13.75 to 14.5 GHz and an IF Frequency from 950 to 1700 MHz.
 
Download Datasheet | Product Details
 
Low Pass Filter
15 W Thin Film Low Pass Filters from 512 MHz to 1900 MHz

Low Pass Filter from AVX Corporation

The low pass LP Series filters from AVX Corporation are thin film filters that operate from 512 MHz to 1,900 MHz (300 MHz to 2,000 MHz products are available on request). These filters can handle a continous power of up to 15 W and can operate over a temperature range of -40°C to +85°C. They measure 7 mm x 4 mm x a maximum of 1 mm with nickel/lead-free-solder (Sn100) coated terminations compatible with automatic soldering technologies.
 
Download Datasheet | Product Details
 
RF Switch
SPDT Switch for 802.11 b/g/n and Bluetooth Applicatons

RF Switch from California Eastern Laboratories

The CG2179M2 from California Eastern Laboratories is a pHEMT GaAs SPDT switch that operates from 0.05 to 3 GHz. It has a low insertion of less than 0.65 dB, high isoaltion of below 39 dB and a switching speed of 50 ns. The switch can handle an input power of up to 32 dBm.
 
Download Datasheet | Product Details
 
RF Mixer
Triple Balanced Surface Mount Mixer from 1 to 6000 MHz

RF Mixer from Synergy Microwave Corporation

The STM-6000 from Synergy Microwave Corporation is a triple-balanced mixer with an RF/LO frequency from 1 to 6000 MHz, an IF frequency from 1 to 4000 MHz. It has a conversion loss of under 11.8 dB, and LO/RF isolation of over 17 dB. The mixer has an LO power of 15 to 23 dBm with a P1dB of 11 dBm and IP3 of 22 dBm. It can be used for both up-conversion and down-conversion applications.
 
Download Datasheet | Product Details
 
RF Repeaters
16 Port Digital GPS Signal Repeater

RF Repeaters from Microlab

The GPSR116 from Microlab is a 16 ports digital GPS repeater that operates in the GPS L1 (1575.42 MHZ) band. This digital GPS repeater system can be used for cellular communications UTC synchronization for locations where the GPS signals are not readily available. The system is built with Microlab’s patent-pending Digital SkyTiming Technology offering GPS signal transmission via CPRI for highly accurate timing and location.
 
Download Datasheet | Product Details
 
Sponsored by MECA
Low PIM Bias Tee
Low PIM Bias Tees for DAS Applications
Low PIM (-165dBc Typical), High power (7 amp), Bias Tees for DAS Applications, with rugged construction and excellent performance across all wireless bands from 0.698 to 2.7 GHz make them ideal for in-building or tower top systems. Available in various Type N configurations as well as custom. Weather- proof IP 67 standard, IP68 available. Click here to learn more.
 
 
 
Antenna
6 dBi Omnidirectional Wi-Fi light Pole Antenna 2.4/5 GHz

Antenna from TerraWave

The M60606OM1D418002L from Terra-Wave is an MIMO omnidirectional Wi-Fi light pole antenna that operates in the 2.4/5 GHz frequency band. It provides a gain of 6 dBi and can handle up to 10 watts of power. The 6 x 4 inches antenna with 4 RPSMA plugs, can be installed on top of a light pole or a PVC or aluminum mounting pole.
 
Download Datasheet | Product Details
 
Antenna
Multi-Polarized UHF Base Station Antenna from 400 to 500 MHz

Antenna from MP Antenna

The 08-ANT-0891 from MPAntenna is a multi-polarized antenna that operates from 400 to 500 MHz. Designed for Remote Monitoring and Two-Way Government/Commercial radio communications, this UHF Base Station antenna offers a light weight, unique tri-element construction and is easily installed with included mast mounting hardware.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Phase Noise Amplifier from 6 to 18 GHz

RF Amplifier from Custom MMIC

The CMD245 from Custom MMIC is a GaAs MMIC low phase noise amplifier that operates from 6 to 18 GHz. It delivers an output power of 21 dBm with a gain of 18 dB and has a noise figure of 3 dB. The amplifier provides a low phase noise of -165 dBc/Hz at 10 kHz offset. Only a single positive power supply of 3 to 5 volts is required for this self- biased amplifier.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Noise Amplifier from 1 to 40 GHz

RF Amplifier from ERZIA

The ERZ-LNA-0100-4000-30-5 from Erzia is a low noise amplifier that operates from 1 to 40 GHz. It delivers an output power of up to 20 dBm with a gain of over 29 dB and has a noise figure of less than 7 dB. The amplifier requires a supply voltage of 9 to 15 volts and consumes up to 3 watts of power.
 
Download Datasheet | Product Details
 
RF Amplifier
Power Amplifier for 1.93 to 1.99 GHz for Wireless Infra

RF Amplifier from Qorvo

The QPA9419 from Qorvo is a two-stage power amplifier that operates from 1.93 to 1.99 GHz. The amplifier provides an output power of 36 dBm with a gain of 30 dB and has a PAE of 14%. It is able to achieve -48 dBc ACLR at +27 dBm output power using 20 MHz LTE signal (9.5 dB PAR). The amplifier requires a supply voltage of 4.5 volts and consumes 455 mA of current.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Signal Analyzer for Next-Gen Communication Testing

RF Spectrum Analyzer from Anritsu

The MS2692A from Anritsu is a RF signal analyzer for next-generation communication applications that operates from 50 Hz to 26.5 GHz. A series of options enables standards-based modulation analysis, vector signal generation, and BER measurement. The end-user can configure a one-box solution that dramatically reduces cost, footprint, and Total Average Cycle Time (TACT) for device evaluation.
 
Download Datasheet | Product Details
 
Sponsored by MECA
 
 
 
RF Switch
CMOS SOI SPDT Switch for Automotive Cellular Applications

RF Switch from Skyworks

The SKYA21003 is a new CMOS silicon-on insulator (SOI) SPDT Switch that operates from 0.1 to 6 GHz. This switch has been developed for automotive LTE cellular and general purpose RF applications. It is AEC-Q100 Grade 2 Qualified with guaranteed RF performance across extended temperature limits, making it an excellent design choice for LTE cellular telematics modems, remote keyless entry devices, infotainment systems, automated toll transponders, garage door openers, GPS/navigation platforms, and other wireless control solutions.
 
Download Datasheet | Product Details
 
RF Duplexer
2 W Ceramic Duplexer 782/751 MHz

RF Duplexer from Anatech Electronics

The AM782-751D319 from Anatech is a Ceramic Duplexer with Band 1 from 746 to 756 MHz and Band 2 from 777 to 787 MHz. The Duplexer has an insertion loss of less than 2.8 dB and an isolation of over 50 dB. It can handle up to 2 watts of power and is available in a surface mount package that measures 34 x 18 x 5 mm.
 
Download Datasheet | Product Details
 
Laminate
Thermally Enhanced Laminates and Prepregs

Laminate from Rogers Corporation

The 92ML StaCool Laminates from Rogers Corporation are thermally enhanced laminates and prepregs, specifically engineered and manufactured to meet the demands of high power applications. They are halogen-free, flame retardant, thermally conductive epoxy based prepregs and laminates. They provide a low-cost, lead-free solder compatible system with enhanced heat transfer characteristics.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.