1. everything RF
  2. RF Newsletters
more
PREV 15th Feb, 2017 NEXT

New RF & Microwave Products this Week

Feb 15, 2017 - everything RF Newsletter
 
everything RF
Date: Feb 15, 2017
 
Sponsored by Mouser
 
 
 
New RF and Microwave Products this Week
RF Switch
High Reliability SPDT Switch from 9 kHz to 9000 MHz

RF Switch from Integrated Device Technology

The F2912 from IDT is a SP2T (SPDT) absorptive RF switch that operates from 0.009 MHz to 9 GHz. The switch delivers excellent linearity and isolation performance while providing 50 ohm terminations to the unused RF input port. The switch uses a single positive supply voltage of 3.3 V supporting three states using either 3.3 V or 1.8 V user-selectable control voltage.
 
Download Datasheet | Product Details
 
Band Pass Filter
Digitally-Controlled Filtering System for Testing LTE/WiFi Applications

Band Pass Filter from K&L Microwave

The Digitally-Controlled Adjustable Bandwidth Tunable filter from KL Microwave has been developed for LTE and WiFi testing. Its passband can be tuned to any frequency range between 700 MHz and 6000 MHz. The system has a software interface for automated testing and can be accessed by a web-based user interface on devices such as smartphones, tablets and computers.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Real Time Handheld Analyzer from 9 kHz to 8 GHz

RF Spectrum Analyzer from Narda Safety Test Solutions

The SignalShark from Narda Safety Test Solutions is a Real Time Handheld Spectrum Analyzer that operates from 9 kHz to 8 GHz. It can be used for a number of use cases, weather making a wideband measurement of an entire frequency range, or detecting hidden signals, or reliably capturing very short impulses, or localizing interference signals.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
450 to 2160 MHz Solid State 75 Ohm Programmable Attenuator

RF Variable Attenuator from JFW Industries

The 75P-173 is a 75 Ohms solid state programmable attenuator that operates from 450 to 2160 MHz. The attenuator has an attenuation range from 0 to 127 dB with an accuracy of 0.3 dB. It has an insertion loss of under 4.5 dB and can handle up to 30 dBm of input power. The attenuator has a switching speed of 2 micro seconds and requires a 5 V DC supply. It is available in a module with BNC, N or F female connectors.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
100 MHz to 20 GHz 8-bit PIN Diode Attenuator

RF Variable Attenuator from Planar Monolithics Industries

The PDVAN-4080-60-8 from PMI is an 8-bit programmable pin diode attenuator that operates from 100 MHz to 20 GHz. It has an attenuation range up to 30 dB with step resolution as low as 0.25 dB and can handle up to 20 dBm of CW power. The device has a switching speed of 1.5 micro sec and an insertion loss less than 4 dB.The attenuator requires a DC supply of +12 V/ +15 V at 150 mA and is available with field replaceable SMA female connectors.
 
Download Datasheet | Product Details
 
RF Module
Low Power IoT Module Supports 2G/3G/4G

RF Module from Sierra Wireless

The WP7502 from Sierra Wireless is a low power 2G+3G+4G IoT module that is optimized for LTE Cat-3 connectivity for 4G networks with 3G and 2G fallback in EMEA. It provides a secure device-to-cloud architecture enabling IoT developers to build a Linux-based product using a single module. This LTE Cat-3 embedded module with 3G and 2G fallback delivers up to a 100 Mbps download speed.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Blue Gecko Bluetooth® Smart Modules
BLE Solution for Easily Adding Energy Friendly Wireless Connectivity at Mouser
Silicon Labs Blue Gecko Bluetooth® Smart Modules quickly add Bluetooth connectivity to IoT and other low-power applications with a certified module software stack and intuitive scripting language for development. Modules integrate a high-performance, ultra-robust antenna. Total PCB area required by the modules is only 51mm².Click here to learn more.
 
 
 
Front End Module
5 GHz 802.11a/n/ac Wi-Fi Front End Module

Front End Module from Qorvo

The QPF8538 from Qorvo is a complete, integrated front end module (FEM) for Wi-Fi 802.11a/n/ac systems. The FEM is available in a small package that is ideal for wireless routers, access points, consumer premise equipments and IoT. It consists of a 5 GHz power amplifier, SPDT switch and a low noise amplifier with bypass.
 
Download Datasheet | Product Details
 
Termination
200 W Flanged Low PIM Termination from DC to 4 GHz

Termination from API Technologies - Inmet

The PPT975-200LP from API Inmet is a low PIM, flanged termination that operates from DC to 4 GHz. It can handle up to 200 W of power, has a resistive tolerance of 5% and a VSWR of under 1.25:1. This termination has been designed to dissipate power in RF circuits when mounted to an appropriate heat sink. It has a PIM level of -120 dBc with two 43 dBm tones.
 
Download Datasheet | Product Details
 
Antenna Alignment Tool
Antenna Alignment Tool

Antenna Alignment Tool from Sunsight Instruments

The AAT-15 AntennaAlign Alignment Tool from Sunsight is one of the lightest and most accurate antenna alignment tools that are used during equipment installation or antenna position audits. It measures antenna alignment in azimuth, tilt, and roll while also indicating its height above ground level. The tool has a quick capture feature for on site captures if antenna position data not available prior to climb.
 
Download Datasheet | Product Details
 
RF & Microwave Isolator
Low IMD Drop-In Isolators from 824 to 2170 MHz

RF & Microwave Isolator from VidaRF

VidaRF has developed a range of drop-in isolators with low IMD that operate from 824 to 2170 MHz. The isolators have an insertion loss of below 0.2 dB and an Isolation of over 25 dB with IMD of -70 dBc (at 45 dBm 2 x tone, 5 MHz spacing). They can handle up to 150 watts of average forward power and 100 watts of reverse power and up to 500 watts of peak power.
 
Download Datasheet | Product Details
 
Antenna
VHF Mobile Centre-fed Dipole Antenna from 30 to 108 MHz

Antenna from Alaris Antennas

The VCF30-108 from Alaris Antennas is an omni-directional, vertically polarised, VHF Mobile Centre-fed Dipole Antenna that operates from 30 to 108 MHz. It provides a gain of 2 dBi and can handle a power of up to 50 watts. This 3 m long antenna is ideal for tactical combat net communications.
 
Download Datasheet | Product Details
 
Antenna
Broadband Yagi Antenna for Wireless Broadband Systems

Antenna from Laird Technologies

The YE572113 from Laird Technologies is a Yagi antenna that operates from 5725 to 6000 MHz. It provides a gain of more than 12.5 dBi and can handle up to 25 watts of power. The antenna can survive a wind speed of 220 km/hr and is designed to complement interior or exterior mounted wireless communication systems.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
 
 
 
90 Degree Hybrid Coupler
Surface Mount 90 Degree Hybrid Coupler from 2 to 6 GHz

90 Degree Hybrid Coupler from Innovative Power Products

The IPP-7150 from Innovative Power Products is a 3 dB, 90 degree hybrid coupler that operates from 2 to 6 GHz. This coupler can handle up to 300 watts of CW power and has improved amplitude balance of less than +/- 0.4 dB across the full band. It provides an isolation of over 17 dB with an insertion loss of less than 0.4 dB.
 
Download Datasheet | Product Details
 
RF Switch
SP4T Absorptive PIN Diode Switch from 2.2 to 2.4 GHz

RF Switch from Panda Microwave

The SP4TA-022024S from Panda Microwave is a SP4T absorptive PIN diode switch that operates from 2.2 to 2.4 GHz. It provides a low insertion loss of above 2.5 dB with an isolation of more than 70 dB and has a switching speed of up to 200 nsec. The switch can handle a power of up to 0.5 watt and has a VSWR of 2.0:1.
 
Download Datasheet | Product Details
 
RF Module
Wireless MCU for Bluetooth 5 Low-Energy Applications

RF Module from Texas Instruments

The CC2640R2F from Texas Instruments is a wireless microcontroller (MCU) targeting Bluetooth 4.2 and Bluetooth 5 low-energy applications. The RF channel of the MCU has a sensitivity of -97 dBm and provides an output power of up to 5 dBm. This low power MCU requires a supply voltage of 1.8 to 3.8 V and consumes up to 9.1 mA of current.
 
Download Datasheet | Product Details
 
Antenna
Multi-Polarized NMO-Mount Antenna fro Public Safety Communications

Antenna from MP Antenna

The 08-ANT-0890 from MPAntenna is a multi-polarized NMO-mount antenna that operates from 698 to 999 MHz. It provides a gain of up to 5.2 dBi and can handle up to 500 watts of power. This RoHS complaint, IP67 rated antenna measures 4.5 x 4.5 x 4 inches, weighs 4 oz and is ideal for public safety communications, smart grid monitoring systems, SCADA and M2M applications.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.