Sponsored by Aeroflex / Inmet | |
|
 New RF & Microwave Products this Week |
|
|  | Vector Network Analyzer from Rohde & Schwarz The R&S ZNBT is a vector network analyzer that enables users to characterize devices under test with multiple test ports (Up to 24 ports) and enables production lines to maintain high throughput by measuring multiple DUTs in parallel. It operates from 9 kHz to 8.5 GHz and provides the high RF performance of a two-port network analyzer at each of its test ports. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Triquint The TGA4536-SM is a K-Band Power Amplifier with an integrated power detector. It operates from 24.2 to 26.5 GHz and is designed using a pHEMT production process. The amplifier provides 34 dBm of saturated output power with small signal gain of 18 dB and an IP3 of 43 dBm at 23 dBm SCL. It is available in a low-cost, surface mount 28 lead 5x5 QFN package and is ideally suited for Point-to-Point Radio. Download Datasheet | Product Details
|
| | |
|
|  | Frequency Synthesizer from Z-COMM The SFS1575D-LF is a 1575.4 MHz frequency synthesizer with a 10 MHz reference for GPS clock systems and L Band applications. The signals have a power level of up to 5 dBm, harmonics of -18 dBc and spurious of -70 dBc. The synthesizer requires a supply of 3 V and is available in a surface mount package that measures 0.6 in. x 0.6 in. x 0.13 in. Download Datasheet | Product Details
|
| | |
|
|  | OCXO from IQD Frequency Products The IQOV-162 Series is a compact OCXO that has been designed for use in CDMA base stations, femtocells, optical networking, 3G & 4G LTE, Ethernet, SoNET/SDH, ATM backplanes, SATA and satellite communications, or whenever a very low profile OCXO is required. It has a wide frequency range from 10 to 100 MHz with a frequency stability down to ±5 ppb (parts per billion). Download Datasheet | Product Details
|
| | |
|
|  | RF Switch from Peregrine Semiconductor The PE42441 is an UltraCMOS SP4T absorptive switch that operates from 10 MHz to 8 GHz. The switch can handle up to 31 dBm P1dB and 58 dBm IP3 with an insertion loss from 0.8 to 1.6 dB and isolation of over 21 dB. It requires a 3V supply voltage while drawing 90 to 160 uA of current. The switch is available in a 32-lead 5x5 mm LGA package. Download Datasheet | Product Details
|
| | |
|
|  | Fixed Attenuator from HASCO Components The HA18A5W-20 from HASCO is a 50 ohm coaxial attenuator which operates from DC to 18 GHz. It provides 20 dB ± 0.50 dB of attenuation(1 to 6, 7 to 12, 15, 30 and 40 options are also available). It can handle up to 5 W of average power and 500 W of peak power. The attenuator has SMA - male and SMA - female connectors. Download Datasheet | Product Details
|
| | |
|
Sponsored by Aeroflex / Inmet |  | If a full hex attenuator better fits your specifications, look no further Aeroflex / Inmet is pleased to introduce a more user friendly version of our most popular 2W SMA attenuator; a full hex (FH) body configuration helps minimize the possibility of the attenuator rotating during installation by providing the technician with increased surface by which to secure the device. The same outstanding performance is now available in the Models 6FH (6GHz) and 18FH (18GHz). Standard attenuation values include 0-10, 12, 15, 20, 30 & 40dB. |
|
|
|  | Fixed Attenuator from Aeroflex - Inmet The 2028-XX is a 2 Watt DC to 18 GHz fixed attenuator with N type male to SMA male connectors. It is available in multiple attenuation configurations from 0 to 10 dB, 12 dB, 15 dB and 20 dB. The attenuators can handle up to 250 W of peak power and are matched to 50 Ohms with a VSWR of less than 1.3:1 across the band. Download Datasheet | Product Details
|
| | |
|
|  | Variable Attenuator from MECA The 680-70-1 is a variable step attenuator from MECA that operates from DC to 2 GHz. It has a total attenuation of 70 dB with a 1 dB Step. It can be controlled manually by a rotary knob. This attenuator can handle up to 2 W (Average Power) and up to 1000 W Peak Power. It is available in a connectorized module with N Type – Female connectors. Download Datasheet | Product Details
|
| | |
|
|  | Drop-In Circulator from VidaRF The VDC-1818-2 is a drop in circulator that operates from 1805 to 1880 MHz. It can handle a forward and reverse power of 250 W with an insertion loss of 0.25 and isolation of 23 dB. The circulator is matched to 50 ohms and has a VSWR of 1.15:1. The VDC-1818-2 can operate at temperatures from -30 to 85 degrees. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from RFHIC The RRM2735160-35 from RFHIC is a GaN, power amplifier which is designed for radar systems operating from 2.7 GHz to 3.5 GHz. It provides up to 180 W of pulse power with a gain of 35 dB and an efficiency of 40%. It has pulse width of 2000 us, a pulse drop of 1 dB and a duty cycle of 20%. Download Datasheet | Product Details
|
| | |
|
|  | Analog Phase Shifter from Planar Monolithics Industries The PS-5G18G-400-A-SFF is a 5 to 18 GHz, Analog Phase Shifter with the capability for Phase Shifting from 0 to 400 Degrees. It has an Impedance of 50 Ohms, an insertion loss of 4 to 8 dB, VSWR of 2.3:1 and a phase voltage sensitivity of 40 Degrees. The phase shifter can accept a max RF power of 30 dBm CW and has a single positive control voltage from 0 to 10 V. It is available in a connectorized module with SMA Connectors. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Ophir RF The 7008 is a dual band solid state power amplifier that operates from 1.15 to 1.45 GHz and 2.7 to 3.1 GHz. The amplifier has a peak output of 1000 W (1.15 to 1.45 GHz) and 500 W (2.7 to 3.1 GHz). It has a variable gain of 30 dB which can be controlled by a knob. The 7008 has a VSWR of 2:1, -30 dBc harmonics and a pulse width from 0.07 to 30 usec with a 10% duty cycle. It is available in a chassis with N Type RF input and output connectors. Download Datasheet | Product Details
|
| | |
|
|  | Inductor from Coilcraft The XFL6012 Series are shielded power inductors with a high current and very low DCR with soft saturation. This series of inductors have an inductance from 0.18 to 1 uH and a DC resistance from 7.06 to 25.2 mOhms. They can operate from 52 to 130 MHz and are available as compact 6.56 x 6.36 x 1.2 mm surface mount inductors that weigh 0.2 gms. Download Datasheet | Product Details
|
| | |
|
|  | RF Transistor from MACOM The MAGX-000035-045000 is an unmatched Gallium Nitride (GaN) on SiC pulsed power transistor that operates from DC to 3500 MHz. It has a 1 ms pulse with a 10% duty cycle, 45 W peak, high gain, efficiency, bandwidth and ruggedness over its bandwidth. The transistor is ideal for civilian and military radar pulsed applications. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Triquint The TQC9305 is a digitally controlled variable gain amplifier for applications between 700 to 3500 MHz. The amplifier has a 5 bit control with a variable gain of 31 dB (1 dB steps). At 1.9 GHz this amplifier provides 13 dB of gain, 40 dBm IP3, 23 dBm P1dB and a 3.1 dB noise figure. The amplifier is ideal for wireless infrastructure applications - LTE, WCDMA, CDMA and GSM. Download Datasheet | Product Details
|
| | |
|
