1. everything RF
  2. RF Newsletters
more
PREV 12th April, 2017 NEXT

New RF & Microwave Products this Week

12 April, 2017 - everything RF Newsletter
 
everything RF
Date: 12 April, 2017
 
Sponsored By Mouser
 
 
 
New RF & Microwave Products this Week
RF Test Set
Wireless Test Set for Evaluating 802.11ac WLAN Devices

RF Test Set from Anritsu

The MT8862A from Anritsu is an advanced one-box wireless connectivity test set to verify the performance of WLAN devices in their actual operating state. This is the first test set of its kind to support all IEEE802.11ac/n/a/g/b standards. It uses the Network Mode to measure RF performance characteristics, such as Tx power and Rx sensitivity (PER) of the target WLAN device under test (DUT).
 
Download Datasheet | Product Details
 
RF Transistor
1800 W LDMOS Transistor from 1.8 to 470 MHz

RF Transistor from NXP Semiconductors

The MRFX1K80H from NXP Semiconductors is a RF Power LDMOS Transistor that operates from 1.8 to 470 MHz. It has been built on the new NXP 65V LDMOS Process. The transistor provides a gain of 24 dB at 230 MHz with an efficiency of 74 % and an output power of 1800 Watts. It requires a supply voltage from 30 to 65 V and has a VSWR of 65:1.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-CM3111 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides an isolation of more than 90 dB. It has shielded power filters for providing power connection in the box while blocking all wireless signals.
 
Download Datasheet | Product Details
 
RF Amplifier
Solid State High Power GaN Amplifier from 4 to 8 GHz

RF Amplifier from Exodus Advanced Communications

The AMP1110 from Exodus Advanced Communications is a solid state high power amplifier that operates from 4 to 8 GHz. It delivers an output power of more than 40 Watts with a gain of over 46 dB and has a noise figure of below 8 dB. This GaN amplifier requires a supply voltage of 38 VDC and consumes up to 12 A of current. It is available as a compact module that measures 190 x 200 x 25 mm with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Ultra Flexible and Rugged Test Cable from DC to 32 GHz

RF Cable Assembly from MegaPhase

The Killer Bee from MegaPhase is an ultra flexible and rugged test cable that can be used from DC to 32 GHz. This light-weight test cable provides a long service life with superior phase and amplitude stability performance through the life of the cable. It is ideal for lab, production and thermal testing applications over a temperature range from -50 to 150 Celsius. A wide variety of connectors are available for use with this cable.
 
Download Datasheet | Product Details
 
RF Amplifier
25 W GaN Power Amplifier Module from 2 GHz to 6 GHz

RF Amplifier from Analog Devices

The HMC7748 from Analog Devices is a multistage power amplifier (PA) module that operates from 2 GHz to 6 GHz. It provides a saturated output power of 25 W with a gain of 60 dB and has a noise figure of up to 6 dB. The module operates from a 12 V and 28 V supply while drawing 0.7 A and up to 4 A of current respectively.
 
Download Datasheet | Product Details
 
Sponsored By Mouser
Silicon EFR32MG
Mouser Carries SoCs for Designing Low Energy, Wireless Connected IoT Devices
Silicon Labs EFR32MG Mighty Gecko Wireless SoCs support Zigbee® and Thread wireless connectivity. The family also includes Bluetooth® low energy and 2.4GHz and Sub-GHz proprietary protocol support along with industry-leading energy efficiency, ultra-fast wakeup times, a scalable power amplifier and no-compromise MCU features. Click here to Learn More
 
 
 
Band Pass Filter
SMT Bandpass Filters from 5 to 30 GHz with 5% Bandwidth

Band Pass Filter from Lark Engineering

The FH Series from LARK Engineering are bandpass filters that operate from 5 to 30 GHz with a bandwidth of 2% to 5%. These bandpass filters can be customized to have 3 to 5 sections and a return loss of more than 10 dB. Insertion loss depends on the number of sections, configuration, and type of substrate used.
 
Download Datasheet | Product Details
 
GNSS Module
Small size, High Performance, Fully-Integrated GNSS Receiver Module

GNSS Module from OriginGPS

The ORG4572 (Multi-Spider) from Origin GPS is a fully-integrated, highly-sensitive, low power GNSS receiver module that continuously tracks all satellites in view (GPS and GLONASS/BEIDOU simultaneously with SBAS, QZSS and other regional overlay systems), providing real-time positioning data in standard NMEA format.
 
Download Datasheet | Product Details
 
RF Switch
Absorptive SP4T Pin Diode Switch from 0.1 to 50 GHz

RF Switch from Planar Monolithics Industries

The P4T-100M50G-100-T-RD from Planar Monolithics is a SP4T switch that operates from 0.1 to 50.0 GHz. This absorptive pin diode switch has a low insertion loss, high isolation and can handle up to 20 dBm of power. It requires a supply voltage of -5V/+5 V and has a switching speed of 50 ns max. This switch is available in a module with 2.4 mm Female RF connectors.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
Digital Programmable Step Attenuator for X-Band Radar and Satellite Links

RF Variable Attenuator from DS Instruments

The DAT64H from DS Instruments is a Digital Programmable Step Attenuator that operates from 100 MHz to 12 GHz. It has an attenuation range of 0 - 63 dB with 0.5 dB steps. The attenuator has an insertion loss of 10 dB and can handle an input power of up to 22 dBm. It is available in a laser-etched solid aluminum enclosure that measures 2.75 x 1.25 x 2 inches with SMA connectors.
 
Download Datasheet | Product Details
 
RF Switch
SPST Reflective Pin Diode Switch from 150 to 1050 MHz

RF Switch from UMCC

The SR-1050-1S is a SPST reflective pin diode switch that operates from 150 to 1050 MHz. The switch can handle up to 40 watts of power and has an insertion loss of less than 0.5 dB and isolation over 70 dB. It has a rise/fall time of 600 ns and a On/Off time of 800 ns. The switch has a VSWR of less than 1.35:1 and is matched to 50 ohms at the input and output. It is available in a module with SMA - Female connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
Dual L-Band Bi-Directional Amplifier from 1.8 to 2.2 GHz

RF Amplifier from Triad RF Systems

The TTRM1093D from Triad RF is an L-Band DUAL bi-directional amplifier that operates from 1.8 to 2.2 GHz. It is designed to work with 2 x 2 MIMO radios and extend their coverage area with over 25 dB of TX gain and 11 dB of RX gain. The amplifier delivers an output power of over 25 Watts. The unit has manual switching between TX and RX modes with switching times less than 1 usec.
 
Download Datasheet | Product Details
 
Sponsored By Mouser
opt3002-sensor
Mouser Ships Light-to-Digital Sensor with Optical Power Meter Functionality.
Texas Instruments OPT3002 Light-to-Digital Sensor features a wide spectral bandwidth that measures light within 300nm to 1,000nm range and takes light measurements from 1.2nW/cm2 up to 10mW/cm2 without manually selecting the full-scale ranges. Click here to Learn More
 
 
 
RF Module
Embedded 802.11 a/b/g/n SoC for IoT Applications

RF Module from Cypress Semiconductor

The CYW43907 from Cypress is an embedded wireless system-on-a-chip (SoC) developed for IoT applications that supports IEEE 802.11 a/b/g/n specifications. The device includes an ARM Cortex-based applications processor, a single stream IEEE 802.11n MAC/baseband/radio, a dual-band 5 GHz and 2.4 GHz transmit power amplifier, and a receive low-noise amplifier.
 
Download Datasheet | Product Details
 
RF Inductor
RF Surface Mount Inductors with Established Reliability Rating

RF Inductor from Gowanda

The ER3013 Series from Gowanda Electronics are off-the-shelf RF Surface Mount Inductors with an Established Reliability (ER) rating. These inductors have inductance values from 0.10 to 1000 µH, Q from 25 to 55 and SRF from 3.4 to 680 MHz. They have a current rating from 28 to 1380 mA DC and DCR from 0.08 to 72 Ohms.
 
Download Datasheet | Product Details
 
USB Power Sensor
USB / Ethernet True RMS Smart Power Sensor from 50 to 6000 MHz

USB Power Sensor from Mini Circuits

The PWR-6RMS-RC from Mini-Circuits is a true RMS USB Smart Power Sensor that operates from 50 to 6000 MHz. The device has a dynamic range of -35 to 20 dBm and a measurement speed of 30 msec. It is a pocket-sized, precision test device, that can be controlled via USB or Ethernet, and turns any Windows or Linux PC into a power meter.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.