1. everything RF
  2. RF Newsletters
more
PREV 10th May, 2017 NEXT

New RF & Microwave Products this Week

10 May, 2017 - everything RF Newsletter
 
everything RF
Date: 10 May, 2017
 
Sponsored by Digi-Key
 
 
 
New RF & Microwave Products this Week
Fixed Attenuator
2 W Fixed Attenuators from DC to 40 GHz

Fixed Attenuator from JFW Industries

The 50HFAR-XXX are fixed attenuators from JFW Industries that operate from DC to 40 GHz. They are available in multiple attenuation configurations from 1 to 30 dB (3, 6, 10, 20 and 30 dB). The Attenuators can handle up to 2 watts of average power and have a VSWR of 1.40:1. These connectorized attenuators are available with 2.9 mm Male/Female connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
4 W VHF/UHF Solid State Bidirectional Amplifier from 225 to 512 MHz

RF Amplifier from NuWaves Engineering

The NW-BA-VU4GX02 from NuWaves is a Bidirectional V- & U-Band Amplifier module that operates from 225 to 512 MHz. It provides a signal gain of 31 dB with a linear RF power of up to 4 watts while operating with 25% power efficiency. The BDA is ideal for extending the communication range of half-duplex transceivers running high peak-to-average waveforms such as OFDM.
 
Download Datasheet | Product Details
 
RF Module
Sub-GHz LoRa Transceiver Module

RF Module from Microchip Technology

The RN2903 from Microchip is a fully certified, LoRA transceiver module that operates in the 915 MHz band. The module can provide up to 18.5 dBm of output power with Tx current consumption of up to 124 mA and Rx current consumption of up to 13.5 mA. It provides a suburban coverage of up to 15 km and urban area coverage of up to 5 km.
 
Download Datasheet | Product Details
 
RF Switch
High Linearity SPDT RF Switch from 5 MHz to 10 GHz

RF Switch from Integrated Device Technology

The F2972 from IDT is a SPDT reflective RF switch that operates from 5 MHz to 10 GHz. It provides low-insertion loss, high isolation, low distortion and can handle up to 40 dBm of power. This device is ideal for DOCSIS 3.1 applications from 5 MHz to 1.8 GHz and can also be used for BTS wireless communications equipment, drones, and general purpose consumer products that operate up to 10 GHz.
 
Download Datasheet | Product Details
 
Fixed Attenuator
100 W Low PIM Fixed Attenuators from DC to 6 GHz

Fixed Attenuator from API Technologies - Weinschel

The Model 298 LIM series from API Weinschel are Low PIM Fixed Attenuators that operate from DC to 6 GHz. They can handle an average power of up to 100 W, peak power of 5 kW and have a VSWR of 1.25:1. The Attenuators are available in 3, 6, 10, 20, 30 and 40 dB attenuation configurations with a PIM of -155 dBc.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
53.125 MHz to 6800 MHz Wideband Synthesizer with Integrated VCO

Frequency Synthesizer from Analog Devices

The ADF4356 from ADI is a Wideband Synthesizer with Integrated VCO that can generate a signal with a frequency from 53.125 MHz to 6800 MHz. It allows implementation of fractional-N or integer-N phase-locked loop (PLL) frequency synthesizers when used with an external loop filter and an external reference frequency. For applications that require isolation, the RF output stage can be muted. The mute function is both pin and software controllable.
 
Download Datasheet | Product Details
 
Sponsored by Digi-Key
CC2640R2F
TI CC2640R2F SimpleLink™ Bluetooth® Smart Wireless MCUs at Digi-Key
The CC2640R2F device is a wireless MCU containing an ARM® Cortex®-M3 (CM3) 32-bit CPU targeting Bluetooth 4.2 and Bluetooth 5 low-energy applications. The device is a member of the SimpleLink ultra-low power CC26xx family of cost-effective, 2.4 GHz RF devices. Click here to learn more.
 
 
 
RF Amplifier
300 W Solid-State Microwave Amplifier from 1 to 6 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 300S1G6AB from AR RF/Microwave Instrumentation is a self-contained, air-cooled, solid-state microwave amplifier that operates from 1 to 6 GHz. It delivers over 300 watts of output power with a gain of more than 55 dB and a noise figure of 9 dB. The amplifier is ideal for use as a driver amplifier in testing wireless and communication components and subsystems. It is also suitable for EMC Test applications.
 
Download Datasheet | Product Details
 
Band Pass Filter
30 to 88 MHz Tunable Bandpass Filter for Tactical Communication Applications

Band Pass Filter from NewEdge Signal Solutions

The SAX248 from NewEdge Signal Solutions is a tunable bandpass filter that operates from 30 to 88 MHz with a resolution of 0.5 MHz. It has an insertion loss of less than 4.5 dB and an upper/lower stopband rejection of more than 15/20 dBc. The filter can handle up to 33 dBm of power. It has been designed for Tactical Communications Applications using binary weighted digital tunable capacitor arrays to cover greater than an octave bandwidth.
 
Download Datasheet | Product Details
 
RF Module
LTE Cat M1 Quad-Band Module for North America including USA, Canada and Mexico

RF Module from u-blox AG

The SARA-R410M-01B from u-blox is a quad-band LTE Cat M1 module for the US, Canada and Mexico (B2/B4/B5/B12). This low power module consumes 8 mA of current in active mode and up to 125 mA of current in LTE connected mode. It includes Power-Saving Mode (PSM) and extended discontinuous reception (eDRX) that together enable it to operate for up to 10 years on a single battery.
 
Download Datasheet | Product Details
 
RF Amplifier
2 Watt GaAs pHEMT MMIC Power Amplifier from 27.3 and 33.5 GHz

RF Amplifier from Analog Devices

The HMC906A from Analog Devices is a four stage GaAs pHEMT MMIC Power Amplifier that operates from 27.3 and 33.5 GHz. It provides a saturated output power of 33.5 dBm with a gain of 26.5 dB nd a PAE of 20%. The amplifier provides excellent linearity and is ideal for satellite communications, VSAT, military, space and point-to-point radios. It requires a supply voltage of 6 V and consumes up to 1200 mA of current.
 
Download Datasheet | Product Details
 
RF Repeaters
Digital Mini Repeaters for 800 MHz, 900 MHz, 1800 MHz, 2100 MHz and 2600 MHz Bands

RF Repeaters from Cobham Wireless

DIGImini series from Cobham are single, dual or quad band digital mini repeaters that operates at 800 MHz, 900 MHz, 1800 MHz, 2100 MHz and 2600 MHz. They support all major wireless technologies including GSM, EDGE, DCS, CDMA, WCDMA, and LTE. These repeaters provide software defined filtering of up to 8 bands and a composite power of 20 dBm per band.
 
Product Details
 
Antenna
700 to 970 MHz Half Wave Dipole Omni Antenna with Integrated RF Gooseneck

Antenna from Southwest Antennas

The 1001-148 from Southwest Antennas is a half wave dipole omni-directional antenna that operates from 700 to 970 MHz. It delivers a gain of 2.07 dBi and can handle a power of up to 50 watts. The antenna has an integrated 3" Gooseneck with a black chrome TNC(m) RF connector and is ideal for handheld video receivers, portable radio systems, or any other mobile communication platform.
 
Download Datasheet | Product Details
 
Sponsored by Digi-Key
 
 
 
Dual Directional Coupler
50 dB Dual Directional Coupler from 20 MHz to 1000 MHz

Dual Directional Coupler from Werlatone Inc

The C10518 from Werlatone is a 50 dB Dual Directional Coupler that operates from 20 MHz to 1000 MHz. It can handle up to 250 Watts of CW power, has a directivity of more than 20 dB and flatness of 0.6 dB. The coupler has an insertion loss of under 0.2 dB and a VSWR 1.30:1. The C10518 is available with N Type Female and SMA connectors. It is ideal for both commercial and military applications.
 
Download Datasheet | Product Details
 
Waveguide Mixer
WR-12 Waveguide Third Harmonic Mixer from 70 to 90 GHz

Waveguide Mixer from SAGE Millimeter

The SFH-7039030318-12KFSF-S1 from SAGE Millimeter is an E-band third harmonic mixer with an IF frequency from DC to 1.5 GHz and RF frequency from 70 to 90 GHz. The mixer has a conversion loss of 17 dB and a LO power of up to 16 dBm. The device is ideal for radar systems, communication systems and test equipment. It has a WR-12 Waveguide size and a UG 387/U-M flange with K & S - Female output connector.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
Dual Chamber RF Shielded Box for Wireless, Bluetooth, RFID and 3G Device Testing

RF Shielded Test Enclosure from RF Electronics

The HDRF-D1260 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. This shielded box has a dual chamber design that allows parallel testing of multiple DUTs. It has a thick RF absorbing foam that provides an isolation of more than 90 dB in each chamber. It has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
Antenna
2.4 GHz Vehicle NMO Mount Mobile Antenna

Antenna from MP Antenna

The 08-ANT-0899 from MPAntenna is a multi-polarized NMO-mount antenna that operates from 2 to 3 GHz. It provides a gain of up to 6 dBi and can handle up to 50 watts of power. This RoHS complaint, IP67 rated antenna measures 2.5 x 2.5 x 1.75 inches, weighs 2 oz and is ideal for providing WiFi, WIMAX, all 802.11 Wireless System applications in vehicles.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.