Sponsored by Mouser |  | Mouser Delivers New Low-Power Sub-1GHz Transmitter. STMicroelectronics STS1TX Low-Power RF Transmitter is intended for sub-1GHz RF wireless applications. The STS1TX embeds a 128-bit data encryption, FIFO memory blocks, plus a highly flexible, programmable data packet in a small 4x4 QFN package. It’s also pin-to-pin compatible with SPIRIT1. |
|
|
 New RF & Microwave Products this Week |
|
|  | 90 Degree Hybrid Coupler from AVX Corporation The PC2025A2100AT00 is a RoHS compliant surface mount 3 dB hybrid coupler for mobile applications, GPS, wireless LAN’s and vehicle location systems. It operates from 1.5 to 2.1 GHz and has excellent isolation. This hybrid coupler is based on AVX’s patented MLO technology which incorporates lumped elements and micro vias. Download Datasheet | Product Details
|
| | |
|
| | 90 Degree Hybrid Coupler from AVX Corporation The PC2025A2700AT00 is a RoHS compliant surface mount 3 dB hybrid coupler for mobile applications, GPS, wireless LAN’s and vehicle location systems. It operates from 2.1 to 2.7 GHz and has excellent isolation. This hybrid coupler is based on AVX’s patented MLO technology which incorporates lumped elements and micro vias. Download Datasheet | Product Details
|
| | |
|
|  | 90 Degree Hybrid Coupler from EMC Technology & Florida RF Labs The WH0530TF is a 90 Degree Hybrid coupler that operates from 500 to 3400 MHz. It can handle up to 100 W of CW power, has an isolation of 25 dB and an insertion loss of 0.5 dB. The hybrid coupler is available in a low profile surface mount package. It can be used with amplifiers, antenna feeds, modulators, demodulators and a number of other components in wireless systems. Download Datasheet | Product Details
|
| | |
|
|  | 2 Way Power Divider from Pulsar Microwave The PS2-56-450/15S is a 2 way power divider that operates from 8 to 60 GHz. It has a low insertion loss of 4 dB, an isolation of over 10 dB and can handle up to 10 W of power. The divider is matched to 50 ohms and ha a VSWR of under 2.5:1. It is available with 1.85 mm connectors. Download Datasheet | Product Details
|
| | |
|
|  | Power Divider from VidaRF The VPD-70124A2 is a 2 way power divider that operates from 7 to 12.4 GHz. It has an insertion loss of 0.5 dB, an isolation of 20 dB and can handle up to 20 W of power. The power divider has SMA female connectors that are matched to 50 ohms with a VSWR of less than 1.4:1. Download Datasheet | Product Details
|
| | |
|
|
|  | Power Divider from MECA The H2D-1.500VWWP is a 2 way power divider part of MECA’s H Series of products. It operates from 0.8 to 2.2 GHz and can handle up to 80 Watts of power. The power divider has an isolation of over 20 dB and an insertion loss of 0.4 dB. It is available with 7/16 connectors and has a VSWR of less than 1.4:1 at the input. Download Datasheet | Product Details
|
| | |
|
|
|
|  | RF Amplifier from Mini Circuits The VNA-28A+ is a wideband amplifier that operates from 0.5 to 2.5 GHz. It has a high directivity with built in DC blocks at the input and output. The amplifier requires a 2.8 V or 5 V supply for operation and is available in a compact surface mount plastic package that measures 5 x 6 mm. It is ideal for use as a buffer amplifier and can also be used for cellular applications. Download Datasheet | Product Details
|
| | |
|
|  | LTE Amplifier from Mini Circuits The PMA4-33GLN+ is a low noise dual chip MMIC amplifier that operates from 0.7 to 3 GHz. It has a low noise figure, high gain and high IP3 making it ideal for sensitive, high-dynamic range receiver applications. The amplifier is matched to 50 ohms and requires a 5 V supply to operate. It is available in a compact 4 x 4 mm surface mount package. Download Datasheet | Product Details
|
| | |
|
|  | GaN Amplifier from Triquint The TGA2583 is an S Band GaN on SiC amplifier that operates from 2.7 to 3.7 GHz. It provides 10 W of saturated power and 33 dB of small signal gain with a PAE of 54%. The amplifier is ideal for phase array S band radars for both military and commercial applications. It can support both short pulse and CW conditions. The amplifier is available as a RoHS compliant QFN. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Ophir RF The 5322 is a 15 Watt broadband benchtop amplifier that is designed for a lab environment. It operates from 5 to 1000 MHz, has a gain of 43 dB, a P1dB of 37 dBm, a VSWR of 2:1,-20 dBc of harmonic and requires a 100 V to 240 V of AC Supply. This small and lightweight amplifier has N-type connectors and is available in a rack mount configuration which measures 15.5 x 4.75 x 10 inches. Download Datasheet | Product Details
|
| | |
|
|  | Low Noise Amplifier from RFHIC The CL2701-L is a hybrid low noise amplifier that operates from 2300 to 3100 MHz. It is internally matched with a small signal gain of 12 dB and a noise figure of less than 1 dB. The amplifier has a P1dB of 16 dBm and an IP3 of 28 dBm. It requires a 5 V supply and is ideal for Repeater, Base Station, WiMAX, WiBro and Radar systems. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Wavelex The WPA0409A is a 0.8 Watt power amplifier that operates from 470 to 960 MHz. It is ideal for VHF, UHF and fixed wireless applications. The amplifier can also be used as a driver and in RF test benches. It has a 29 dBm P1dB, 14 dB gain, VSWR of 1.8:1 and an IP3 of 43 dBm. The WPA0409A is RoHS compliant and is available in a module with SMA female connectors. Download Datasheet | Product Details
|
| | |
|
|  | GaN Transistor from Cree The CGHV27030S is an unmatched GaN HEMT transistor that operates from DC to 6 GHz. It can provide a power of up to 30 W and requires a 28/50 V supply for operation. The transistor has been designed for high efficiency, high gain and wide bandwidth capabilities making it ideal for tactical communication applications. It is available in a 3 x 4 mm surface mount DFN package. Download Datasheet | Product Details
|
| | |
|
|  | RF Transistor from Cree The CGHV27015S is an unmatched GaN HEMT transistor that operates from DC to 6 GHz. It can provide a power of up to 15 W and requires a 50 V supply for operation. The transistor has been designed for high efficiency, high gain and wide bandwidth capabilities making it ideal for LTE, 4G Telecom and BWA amplifier applications. It is available in a 3 x 4 mm surface mount DFN package. Download Datasheet | Product Details
|
| | |
|
|  | RF Switch from Planar Monolithics Industries The P2T-1G1R1G-25-R-TFF-40W is a SPDT reflective switch that operates from 1 to 1.1 GHz. This switch can handle up to 40 Watts of power and 4KW of peak power. It has a 3 micro second pulse width with a 1% duty cycle and switching speeds of 300 ns. The P2T-1G1R1G-25-R-TFF-40W consumes 18 mA with a 50 V supply and 63 mA with a 5 V supply. It is available in a hermetically sealed package with TNC Female connectors. Download Datasheet | Product Details
|
| | |
|
|  | Band Pass Filter from Triquint The 885062 is a BAW Filter that enables the coexistence of 4G and WiFi signals at 2.4 GHz. It has extremely steep skirts, simultaneously exhibiting low loss in the WiFi band and high band-edge & near-in rejection. The filter is ideal for portable hotspots, mobile routers, base stations and smart meters. It is available in an industry standard package that measures 1.4 x 1.2 x 0.46 mm. Download Datasheet | Product Details
|
| | |
|
