1. everything RF
  2. RF Newsletters
more
PREV 19th July, 2017 NEXT

New RF & Microwave Products this Week

19 July, 2017 - everything RF Newsletter
 
everything RF
Date: 19 July, 2017
 
Sponsored by Mouser
 
 
 
New RF Products this Week
RF Module
LTE Cat M1 / NB1 Module with Global Coverage

RF Module from u-blox AG

The SARA-R410M-02B from u-blox is an ultra-low power, configurable LTE Cat M1/NB1 multi-mode global module for the development of LPWA IoT applications. The module provides both LTE Cat M1 and Cat NB1 in a single hardware package, as well as software-based configurability for all deployed bands.
 
Download Datasheet | Product Details
 
RF Amplifier
6 to 18 GHz 5 Watt High Power Amplifier

RF Amplifier from Ducommun

The AHP-12123657-S from Ducommun is a high power amplifier that operates from 6 to 18 GHz. It delivers a linear output power of 5 watts and has a small signal gain of over 57 dB. The amplifier operates from a single bias supply of 10 Vdc to 15 Vdc with an internal voltage regulator and bias sequencing circuitry, consuming about 5.0 A of DC current under linear operation.
 
Download Datasheet | Product Details
 
RF Amplifier
High-Power Bluetooth Power Amplifier for Mobile Applications

RF Amplifier from Skyworks

The SKY85018-11 from Skyworks is a Bluetooth Power Amplifier with bypass mode, suited for improving Bluetooth connectivity ranges, which are required for music streaming. It provides a gain of 20 dB and high output power of 23 dBm for basic data rates and 14 dBm for enhanced data rates.
 
Download Datasheet | Product Details
 
RF Cable Assembly
DC to 50 GHz Flexible VNA Test Port Extension Cables

RF Cable Assembly from MegaPhase

The High Performance VN Series Cable Assemblies from MegaPhase are VNA Test Port Extension Cables that operate up to 50 GHz. These VNA cable assemblies are designed to ease the time associated with test equipment calibrations where compensation for loss, mismatches, and feedthroughs are critical to the test outcome.
 
Download Datasheet | Product Details
 
Frequency Doubler
7 to 11 GHz (C and X Band) Passive Frequency Doubler

Frequency Doubler from Custom MMIC

The CMD226N3 is a MMIC GaAs passive frequency doubler with an input frequency of 7 to 11 GHz and output frequency from 14 to 22 GHz. It provides a conversion loss of 10.5 dB at an output frequency of 18 GHz, when driven by an input signal of +15 dBm. The Fo and 3Fo isolations are 44 dBc and 48 dBc respectively.
 
Download Datasheet | Product Details
 
Fixed Attenuator
50 Watt, Low PIM Attenuator from DC to 10 GHz

Fixed Attenuator from API Technologies - Weinschel

The Model 264 LIM from API Weinschel is a low PIM fixed attenuator that operates from DC to 10 GHz. It is available in multiple attenuation configurations from 3 to 40 dB (3, 6, 10, 20, 30 and 40 dB) and has a low PIM of up to -155 dBc. The Attenuator can handle up to 50 watts of average power and has a VSWR of 1.30:1.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
nRF52 Series
High Performance Bluetooth Smart SoC Solution for Wearables & Human Interface Devices
Nordic Semiconductor nRF52 Series SoCs quickly carry out complex tasks then return to sleep to conserve battery power. The nRF52 Series utilizes a ARM Cortex™-M4F processor and runs at 64MHz with a 215 EEMBC Coremark® score, 90 Coremark®/mA, 39µA/MHz (flash) and 30µA/MHz (RAM). Click here to learn more
 
 
 
RF Amplifier
Solid State Bi-directional Amplifier from 225 MHz to 512 MHz

RF Amplifier from NuWaves Engineering

The NuPower Xtender VU4GX01 BDA from NuWaves is a bidirectional amplifier that operates from 225 MHz to 512 MHz providing a linear power of 4 Watts. It provides a P1dB of more than 10 Watts and a gain of 31 dB when transmitting. And when receiving provides a P1dB of 17 dBm and gain of 15 dB.
 
Download Datasheet | Product Details
 
90 Degree Hybrid Coupler
3 dB, 90 Degree Hybrid Coupler from 2 to 4 GHz

90 Degree Hybrid Coupler from MECA

The 705S-3.000 from MECA is a 3 dB, 90 Degree Hybrid Coupler that operates from 2 to 4 GHz. This hybrid coupler can handle up to 50 watts of average power and up to 3 kW of peak power. It has an isolation of over 25 dB and a VSWR of 1.15:1. The 705S-3.000 is available in a rugged aluminium module with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Mixer
2 to 20 GHz, Microlithic Double Balanced Mixer

RF Mixer from Marki Microwave

The ML1-0220LCH is a Microlithic double balanced broadband mixer that operates from 2 to 20 GHz. It features a conversion loss of 7 to 14 dB, LO-RF Isolation of 45 dB and LO-IF Isolation of 20 dB. Accurate, nonlinear software models are available for Microwave Office through the Marki Microwave PDK. The ML1-0220LCH is available in a wire bondable chip package measuring 0.152 x 0.090 x 0.010 Inches.
 
Download Datasheet | Product Details
 
Microwave Backhaul Radio Links
70/80 GHz 2 Gbps E-Band Radio for Wireless Ethernet Connectivity

Microwave Backhaul Radio Links from Siklu

The EtherHaul-2500FX from Siklu is a 70/80 GHz Multi-Gigabit E-Band Radio that delivers up to 2 Gbps full duplex point-to-point wireless Ethernet connectivity, with 32 QAM modulation. This radio supports the 71-76/81-86 GHz bands with additional output power and wider channels making it easy for operators and enterprises to extend their networks by very quickly adding affordable, high capacity wireless links that are easy to install.
 
Download Datasheet | Product Details
 
Microwave Backhaul Radio Links
450 Mbps Point to Point Backhaul Radio from 4.9 to 6.05 GHz

Microwave Backhaul Radio Links from Cambium Networks

The PTP 670 series are Point to Point Backhaul from Cambium Networks operates from 4.9 to 6.05 GHz. They provide multi-band flexibility in a single radio with channel sizes from 5 to 45 MHz. These backhaul radios provide an aggregrate throughput of up to 450 Mbps and an output power of up to 27 dBm.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
4-Port Computer Controlled Vector Network Analyzer from 100 kHz to 9 GHz

Vector Network Analyzer from Copper Mountain Technologies

The C1409 from Copper Mountain Technologies is a 4-port modular vector network analyzer that operates from 100 kHz to 9 GHz. The VNA can measure all S parameters and can be controlled using any Windows PC or laptop. It has a dynamic range of up to 162 dB (1Hz IF BW), directivity of 46 dB and sweep speeds of 10 microseconds per point.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
 
 
 
RF Test Set
All-in-one Base Station Simulator

RF Test Set from Anritsu

The MD8475B Signalling Tester from Anritsu is an all-in-one base station simulator supporting LTE, LTE-Advanced, W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/GPRS/EGPRS, CDMA2000 1X/1xEV-DO Rev. A. and TD-SCDMA/TD-HSPA. It has an efficient performance test environment using built-in traffic generator for 600 Mbps IP data transfers with all-in-one support for LTE-Advanced 3CA/4CA technologies.
 
Download Datasheet | Product Details
 
Power Divider
20 W, 4-Way Power Divider from 0.5 to 6 GHz

Power Divider from BBTLine

The BBTLine_4Way_Version2_SMT from BBTLine is a 4-Way Power Divider that operates from 0.5 to 6 GHz. This power divider can handle up to 20 watts of power and has a low insertion loss of under 1.6 dB. It is not a typical Wilkinson-style device, but a design which yields a more compact splitter/combiner with excellent low loss RF characteristics and high power handling capability.
 
Download Datasheet | Product Details
 
RF Switch
GaAs MMIC SPDT Absorptive Switch from DC to 20 GHz

RF Switch from Microsemi

The MMS006PP3 from Microsemi is a non-reflective, GaAs pseudomorphic SPDT MMIC switch that operates from DC to 20 GHz. This switch provides an isolation of more than 35 dB while maintaining a low insertion loss of less than 2.25 dB. It can handle an input power of up to 25 dBm and has a switching speed of less than 10 nanoseconds.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
6-bit Digital Attenuator from DC to 40 GHz

RF Variable Attenuator from HXI

The HDA040-069 from HXI is a 6-bit Digital Attenuator that operates from DC to 40 GHz. The attenuator has an attenuation range of 31.5 dB with a 0.5 dB LSB. The attenuator has a fast switching speed of 45 ns and can handle an input power of up to 35 dBm. It is available in a module and is ideal for communication systems, radars and in test equipment applications.
 
Download Datasheet | Product Details
 
Antenna
900 MHz Omni-Directional Antenna for Wireless LAN, SCADA, & Cellular Band Applications

Antenna from L-COM

The HG908UP-NF from L-com is a lightweight, low profile, Omni-directional antenna designed for the 900 MHz ISM band. This antenna is ideally suited for multipoint, Non Line of Sight (NLOS) and mobile applications. It delivers a gain of up to 8 dBi and can handle a power of 50 watts. The antenna can be used for Wireless LAN, SCADA, Wireless Video Links and Cellular band applications.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.