1. everything RF
  2. RF Newsletters
more
PREV 4th, Oct 2017 NEXT

New RF Products this Week

4 Oct, 2017 - everything RF Newsletter
 
everything RF
Date: 4 Oct, 2017
 
Sponsored by MECA
 
 
 
New RF & Microwave Products this Week
RF Mixer
6 GHz to 26.5 GHz GaAs Double Balanced MMIC Mixer

RF Mixer from Marki Microwave

The MM1-0626H from Marki Microwave is a passive GaAs double balanced MMIC mixer with an RF/LO frequency from 6 GHz to 26.5 GHz and IF frequency from DC to 9 GHz. The mixer has excellent conversion loss, isolation and spurious performance across its broad bandwidth. It is available as a wire bondable chip that measures 0.058" x 0.046" x 0.004" or as a module with SMA connectors.
 
Download Datasheet | Product Details
 
Voltage Controlled Oscillator
Voltage Controlled Oscillator from 1340 to 1358 MHz

Voltage Controlled Oscillator from Z-COMM

The TRO1350A-LF from Z-communications is a Voltage Controlled Oscillator which can be tuned to a frequency from 1340 to 1358 MHz with a tuning voltage from 0.5 to 4.5 V. This VCO provides a spectrally clean signal with a phase noise as low as -117 dBc/Hz at 10 kHz offset while operating on a supply of 5 VDC and draws less than 30 mA of current.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure for Applications up to 75 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-2260 from RF Electronics is a RF Shielded Test Enclosure that can be used to test devices that operate up to 75 GHz. It has a thick RF absorbing foam that provides a reflection loss of over 23 dB at 60 GHz. The test enclosure has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
2-Port Vector Network Analyzer with Optional Spectrum Analyzer from 5 kHz to 3/6 GHz

Vector Network Analyzer from Rohde & Schwarz

The R&S ZNL from Rohde & Schwarz is a two-port vector network analyzer for bidirectional measurements that operates from 5 kHz to 3 GHz or 6 GHz. It provides solid network analyzer performance with a dynamic range of up to 130 dB and an output power range from -40 dBm to +3 dBm. The standard features include embedding/deembedding, fixture compensation, time domain measurements and support of automatic calibration units.
 
Download Datasheet | Product Details
 
Band Pass Filter
18 to 30 GHz Cavity Band Pass Filters

Band Pass Filter from Networks International Corporation

The K-Ka Band Cavity Filters from Networks International Corporation operate from 18 to 30 GHz. They have an insertion loss of under 1.2 dB and operate over a wide temperature range from -40 to 85 Degrees Celcius. The filters are available in a connectorized package that measures 1.18 x 0.50 x 0.30 inches with SMA female connectors and are ideal for airborne, shipmount or vehicle mount applications in harsh military environments.
 
Download Datasheet | Product Details
 
RF Amplifier
20 Watt C-Band Solid State Bi-Directional Amplifier

RF Amplifier from NuWaves Engineering

The NW-BA-C-20-RX01 from NuWaves is a C-band Solid State Bi-directional Amplifier that operates from 4.4 to 4.9 GHz. This new Bi-Directional Amplifier offers the performance of a traditional power amplifier coupled with a low noise amplifier for receive mode, providing an amplification solution in one miniaturized package for half-duplex transceivers.
 
Download Datasheet | Product Details
 
Sponsored by MECA
Meca Directional Coupler
Public Safety Band High Power Couplers
Directional Couplers (6 dB, 10 dB, 20 dB & 30 dB) covering Public Safety Bands from 380 MHz – 960 MHz. MECA’s rugged & reliable construction makes them ideal for enterprise & public safety networks such as UHF, VHF, 700 MHz & Cell bands. They are available with Type-N & SMA Female interfaces. These couplers are made in USA and have a 36 month warranty. Click here to learn more.
 
 
 
RF Amplifier
150 Watts, Solid State GaN Amplifier from 6 to 18 GHz

RF Amplifier from Exodus Advanced Communications

The AMP2065 is a solid state GaN power amplifier that operates from 6 to 18 GHz. It provides a saturated output power of 150 watts with a gain of over 52 dB. This rack mount amplifier has built-in protection and can withstand harsh environments. It can be controlled using a control panel on the front of the amplifier system.
 
Download Datasheet | Product Details
 
RF Amplifier
2 W GaAs Distributed Power Amplifier from 0.1 and 20 GHz

RF Amplifier from Analog Devices

The HMC998APM5E is a GaAs pHEMT MMIC Distributed Power Amplifier that operates from 0.1 and 20 GHz. The amplifier provides gain of 11 dB and P1dB of 31 dBm while requiring only 500 mA of current from a 15 V supply. It is available in a leadless QFN 5x5 mm surface mount package and is ideal for EW, ECM, Radar, fiber optics and test equipment applications.
 
Download Datasheet | Product Details
 
RF Amplifier
Q Band Power Amplifier from 33 to 47 GHz

RF Amplifier from ERZIA

The ERZ-HPA-3300-4700-29 is a Q Band Power Amplifier that operates from 33 to 47 GHz. It provides a gain of more than 27 dB and output power of up to 31 dBm while operating on a 12 V supply. The amplifier is available in a Gold plated compact aluminum module with 2.4 mm female connectors and is ideal for satcom, telecom, space, military and industrial applications.
 
Download Datasheet | Product Details
 
GNSS Module
GNSS Location IC with an Integrated Sensor Hub

GNSS Module from Broadcom

The BCM47755 from Broadcom is a single-chip device that combines location awareness capabilities with the typical functions of a sensor hub. The combination provides synergistic benefits that cannot be achieved with multiple ICs, such as low power consumption, higher accuracy, reduced footprint and a smaller BOM.
 
Download Datasheet | Product Details
 
RF Amplifier
Power Amplifier Module for Quad-Band GSM / GPRS / EDGE / TD-SCDMA

RF Amplifier from Skyworks

The SKY77360-12 from Skyworks is a power amplifier module (PAM) that supports fixed gain Gaussian Minimum-Shift Keying (GMSK), fixed gain linear Enhanced Data for GSM Evolution (EDGE) modulation in the GSM850/900 and DCS1800/PCS1900 bands, and TD-SCDMA modulation in Bands 34 and 39. It also supports Class12 General Packet Radio Service (GPRS) multi-slot operation.
 
Download Datasheet | Product Details
 
Wireless SoC
2.4 GHz Multi-Protocol SoC for Ultra Low-Power Wireless Applications

Wireless SoC from Nordic Semiconductor

The nRF52840 is an advanced multi-protocol system-on-chip (SoC) that supports several protocols, including the recently released Bluetooth 5 specification and is ideal for smart home, wearables, and Internet of Things (IoT) applications. The nRF52840 SoC employs a 64 MHz, 32-bit ARM Cortex-M4F processor employed on Nordic's nRF52832 SoC, plus a CPU with ample generic processing power, floating point, and digital signal processor (DSP) performance.
 
Download Datasheet | Product Details
 
Sponsored by MECA
 
 
 
Dual Directional Coupler
500 MHz to 2500 MHz Dual Directional Surface Mount Coupler

Dual Directional Coupler from Innovative Power Products

The IPP-8057 from Innovative Power Products is a dual directional coupler that operates from 500 MHz to 2500 MHz. It has a coupling value of 33 dB, an insertion loss of less than 0.25 dB, directivity of over 20 dB and a VSWR of 1.25:1. The coupler can handle up to 150 W of average power and is available in a surface mount module that measures 0.50 x 1.00 inches.
 
Download Datasheet | Product Details
 
Analog to Digital Converter
10-bit Quadruple Analog to Digital Converter

Analog to Digital Converter from e2v

The EV10AQ190A from e2v is a 10-bit Quad Analog to Digital Converter. It has four separate, digitally programmable 10-bit 1.25 GSPS ADC channels that provide a sampling rate of 1.25 Gsps in four-channel mode, 2.5 Gsps in two-channel mode and 5 Gsps in one-channel mode. The ADC has a channel to channel isolation of more than 60 dB and dissipates a power of 1.4 W per channel.
 
Download Datasheet | Product Details
 
Directional Coupler
5 dB Directional Coupler from 380 MHz to 2.7 GHz

Directional Coupler from Werbel Microwave

The 1CN3827-05 from Werbel Microwave is a directional coupler that operates from 380 MHz to 2.7 GHz. It has a coupling value of 5 dB, directivity of over 20 dB and an insertion loss of 2.5 dB. It can handle up to 45 watts of power and has a VSWR of 1.35:1. The coupler is available in a module with SMA female connectors.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.