1. everything RF
  2. RF Newsletters
more
PREV 11th, Oct 2017 NEXT

New RF & Microwave Products this Week

11 Oct, 2017 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 11 Oct, 2017
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
RF Amplifier
Compact Two-Stage Doherty Amplifier for LTE-A Pro Base Stations

RF Amplifier from Ampleon

The BLM9D2527-20AB from Ampleon is a two-stage doherty amplifier that operates from 2575 to 2634 MHz. Capable of also being used also as a power amplifier in small cells, this compact and highly efficient device is much smaller and easier to use than a traditional discrete Doherty amplifier design. It consists of a dual-stage Doherty amplifier with two stages of gain and is matched to 50 ohms at the input and output.
 
Download Datasheet | Product Details
 
RF Mixer
Surface Mount Compact I/Q Mixer from 4 to 8 GHz

RF Mixer from Custom MMIC

The CMD252C4 is a surface mount compact I/Q mixer with a RF/LO frequency from 4 to 8 GHz. It has a low conversion loss of 6.5 dB, high LO to RF isolation of 52 dB, and an input IP3 of 25 dBm across the bandwidth. The CMD252C4 can be configured as an image reject mixer or single sideband upconvertor by utilizing two double balanced mixer cells and a 90 degree hybrid.
 
Download Datasheet | Product Details
 
RF Amplifier
20 W GaN Solid-State Power Amplifier from 800 MHz to 2500 MHz

RF Amplifier from NuWaves Engineering

The NW-PA-15D05A from NuWaves is a GaN solid-state power amplifier that operates from 800 MHz to 2500 MHz. It delivers more than 20 watts of RF power with an efficiency of 25% to extend the operational range of data links and transmitters. The PA provides a gain of up to 61 dB and near-constant envelope waveforms. It requires a supply voltage of 27 to 30 V DC and consumes up to 3.6 A of current.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Portable Spectrum Analyzer from 5 kHz to 3 GHz

RF Spectrum Analyzer from Rohde & Schwarz

The FPL1000 from Rohde & Schwarz is a portable spectrum analyzer that operates from 5 kHz to 3 GHz. This instrument can be used for spectrum analysis, highly accurate power measurement with power sensors and analysis of analog and digitally modulated signals. It has a resolution of 1 Hz and has a large 10.1" WXGA touchscreen that makes measuring fast and simple.
 
Download Datasheet | Product Details
 
Microwave Backhaul Radio Links
Multi-Gigabit Microwave Radio from 6 to 42 GHz

Microwave Backhaul Radio Links from BridgeWave

The NAVIGATOR DT is a licensed microwave radio system that operates from 6 to 42 GHz. It can achieve data rates up to 3 Gbps per radio using a single carrier per transceiver and 5.5 Gbps using dual sub-carriers per transceiver, without requiring any additional equipment. The backhaul includes XPIC and MIMO frequency re-use technologies to double capacity using a single licensed channel.
 
Download Datasheet | Product Details
 
RF Module
Stand-alone Bluetooth 5.0 Low Energy Module

RF Module from u-blox AG

The NINA-B3 series from u-blox are stand-alone Bluetooth 5 low energy modules based on the Nordic Semiconductor’s nRF52840 chip. Featuring Bluetooth low energy long range connectivity, high data transfer rates and supporting Bluetooth mesh and 802.15.4, NINA-B3 caters to applications in smart buildings, smart cities, and the Industry 4.0, including smart lighting systems, industrial sensor networks, asset tracking solutions, and building automation systems.
 
Product Details
 
Sponsored by Mouser
LMX2594
Generate Frequencies from 10MHz to 15GHz without an Internal Doubler
Without using an internal doubler, the Texas Instruments LMX2594 Wideband PLLatinum™ RF Synthesizer utilizes integrated VCOs that can generate any frequency from 10MHz to 15GHz. This feature eliminates the need for sub-harmonic filters. Click Here to Learn More.
 
 
 
RF Amplifier
50 W Rack Mount Power Amplifier from 700 to 6000 MHz

RF Amplifier from Mini Circuits

The HPA-50W-63+ from Mini Circuits is a coaxial power amplifier that operates from 700 to 6000 MHz. The amplifier provides an output power of 50 watts with a gain of 49 dB and noise figure of 12 dB. This high power, rack mount amplifier with a self-contained AC power supply, can be used for a wide variety of laboratory testing applications like RF power stress test, reliability testing, EMI and antenna testing.
 
Download Datasheet | Product Details
 
RF & Microwave Isolator
2 Watt RF Isolator from 700 to 800 MHz

RF & Microwave Isolator from MECA

The IS-0.750 from MECA is an RF isolator that operates from 700 to 800 MHz. It has an isolation of over 17 dB, insertion loss of 0.50 dB and a VSWR of below 1.30:1. The isolator can handle up to 2 watts of CW power and up to 50 watts of peak power. It is available in an IP 67 compliant module with SMA female connectors. This isolator is currently available and can ship from STOCK in less than 4 weeks after the receipt of an order.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
Table Top RF Shielded Test Enclosure for 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G Device Testing

RF Shielded Test Enclosure from RF Electronics

The HDRF-1070 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz (options up to 60 GHz are available). It has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 2.4 GHz in each chamber. It has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
Waveguide Amplifier
Low Noise Waveguide Amplifier form 110 to 130 GHz

Waveguide Amplifier from SAGE Millimeter

The Model SBL-1141341570-0606-E1 from Sage Millimeter is a low noise amplifier that operates from 110 to 130 GHz with a small signal gain of 15 dB and noise figure less than 7 dB. It requires a 8 V DC supply and consumes 75 mA of current. The amplifier has WR-06 waveguides and UG-387/U-M flanges.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
Solid State Programmable Attenuator from 100 MHz to 18 GHz

RF Variable Attenuator from JFW Industries

The 50P-2061 from JFW Industries is a solid state programmable attenuator that operates from 100 MHz to 18 GHz. It has an attenuation range from 0 to 31 dB with 1 dB steps. This step attenuator has a fast switching speed of 1 micro second and can handle an input power of up to 20 dBm. It is available in a module with SMA connectors.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
Compact USB VNA from 20 kHz to 3 GHz

Vector Network Analyzer from Copper Mountain Technologies

The S7530 is a 75 Ohm 2 Port compact VNA that operates up to 3 GHz. It has a wide dynamic range and can be operated with any Windows PC or laptop. Its small size makes it easy to carry around to test sites or to share within a team. In addition to S parameters (S11, S12, S21, S22) this VNA has a variety of analysis capabilities, including time-domain with gating and frequency offset modes.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
 
 
 
Antenna
2 x 2 MIMO Sector Antenna from 4.4 to 5 GHz

Antenna from Southwest Antennas

The 1055-345 from Southwest Antennas is a 2 Input 2 x 2 MIMO Sector Antenna that operates from 4.4 to 5 GHz. It provides a gain of up to 10 dBi and can handle 50 Watts of power. It has two antenna elements each with their own TNC(f) RF connector offering slant left and slant right polarizations, providing transmit and receive polarization diversity with 56 degree beamwidth per element.
 
Download Datasheet | Product Details
 
RF Switch
High Power Absorptive SP4T Switch from 2 to 18 GHz

RF Switch from UMCC

The SR-S070-4S from UMCC is an absorptive SP4T PIN-Diode-Switch that operates from 2 GHz to 18 GHz. It has an insertion loss of 3.4 dB, an isolation up to 85 dB and a VSWR under 2.0:1. The absorptive switch has a rise/fall time of 25 ns and can handle an average power of 24 dBm and peak power of up to 5W. It is available with SMA connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
GaAs MMIC pHEMT Distributed Amplifier from DC and 25 GHz

RF Amplifier from Microsemi

The MMA041PP5 is a GaAs MMIC pHEMT distributed amplifier that operates from DC and 25 GHz. The amplifier provides a flat gain of 17 dB with a noise figure of 2.5 dB and an output power of 21 dBm (p1dB) while requiring only 150 mA from a 7 V supply. Output IP3 is typically 35 dBm.
 
Download Datasheet | Product Details
 
RF Module
2-in-1 Bluetooth Low Energy and LoRa RF Module

RF Module from Telit Communications

The RE866 from Telit is an ultra-low power LoRa certified module that also supports Bluetooth Low Energy (V5). It contains two radios, allowing customers to use this module either as a Sub-gigahertz (Sub-GHz) or 2.4 GHz module. The module has an integrated antenna for BLE and an external antenna for Sub-GHz applications.
 
Download Datasheet | Product Details
 
Termination
1500 W AIN Stripline Termination from DC to 1 GHz

Termination from Diconex

The 17-0800 from Diconex is AIN stripline termination that operates from DC to 1 GHz. It can handle up to 1500 Watts of power and has a VSWR of 1.40:1. This termination is available in a surface mount package.
 
Product Details
 
About everything RF
everything RF keeps you up to date with the latest RF & Microwave product releases every week. Use the search tools on the site to identify products from the leading manufacturers that meet your specification.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]