|
 New RF & Microwave Products this Week |
|
|  | RF Amplifier from Triquint The TGA2594 is a Ka-Band GaN (Gallium Nitride) Amplifier that operates from 27 to 31 GHz with a saturated power of 5 W (37 dBm) and a gain of 19 dB. It operates on a supply voltage of 20 V with a current of 280 mA. It is available in a Die form factor. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Mini Circuits The CMA-252LN+ is a low noise, high IP3 Amplifier that operates from 1.5 to 2.5 GHz. It has a low noise figure of 0.8 dB, provides a gain of 17 dB, a P1dB of 17 dBm and an IP3 of 30 dBm. It operates on a single 3 to 4 V supply and has an adjustable current consumption of 25 to 80 mA. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Hittite The HMC3587LP3BE from Hittite is a HBT gain block MMIC amplifier which operates from 4 GHz to 10 GHz. It provides a gain of 14.5 dB and 13 dBm of power(P1dB) with a 3.5 dB noise figure. It is ideal for cellular, PCS, 3G, WLAN, CATV, DBS, microwave radio & test equipment applications. The amplifier can be used as a cascadable IF or RF gain stage in 50 Ohm applications. It is available in 12 lead 3x3 mm surface mount package. Download Datasheet | Product Details
|
| | |
|
|  | Power Sensor from Agilent Technologies The U8480 Series of Thermocouple Power Sensors from Agilent operate at frequencies from DC to 70 GHz. They have a power range from -35 to 20 dBm and are available with a number of connector options - N Type, 3.5 mm, 2.4 mm and 1.85 mm. The power sensors have a USB interface and have a low calibration error. Download Datasheet | Product Details
|
| | |
|
|
|  | Vector Network Analyzer from Agilent Technologies The Agilent E5063A series of network analyzers is available in three frequency options 100 kHz to 4.5 GHz, 8.5 GHz and 18 GHz. It offers a balance of performance and cost. It offers optimized performance and functionality for testing simple RF passive components, such as handset/BTS antennas, RF cables and filters. It can also be used in R&D for evaluation of RF passive devices and dielectric materials. The network analyzers have 2 ports and excellent RF performance, including trace noise of 0.002 dBrms and the stability of 0.01 dB/degC. Download Datasheet | Product Details
|
| | |
|
|  | Power Divider from JFW Industries The 50PD-771 from JFW Industries is a 4 way resistive power divider/combiner which operates from DC to 6 GHz. It has an insertion loss of 12 dB and can handle up to 1 W of power. This power divider has been specifically designed for laboratory testing of radio transceivers in mesh networks, allowing for signal connectivity over a wide bandwidth with minimal isolation. It has SMA - female connectors as standard options, but custom designs and configurations are also available. Download Datasheet | Product Details
|
| | |
|
|  | Power Divider from Werlatone Inc The D9392 from Werlatone is a broadband, 2 Way divider/combiner which operates from 500 to 2500 MHz. It has an insertion loss of 0.3 dB, an isolation of 15 dB and can handle up to 500 W of CW power. It has an amplitude balance of 0.3 dB and a phase balance of 5 degrees. The power divider is available in a module with N type and SMA type connector options. Download Datasheet | Product Details
|
| | |
|
|  | RF Mixer from Linear Technology The LTC5577 is an active down-converting mixer from Linear Technology which operates at a frequency from 300 MHz to 6 GHz. It is ideal for is ideal for LTE, LTE Receiver applications and a wide range of radios requiring robust performance, such as cable TV transceivers, wideband military radios, broadband VHF/UHF white space broadcast radios, software-defined radios, RF test instrumentation, wireless repeaters and satellite communications. Download Datasheet | Product Details
|
| | |
|
|  | Up Converter from MACOM The MAUC-010506 from MACOM is an up-converter module that consist of a mixer, LO doubler, LO buffer amplifier, and RF buffer amplifier. The up converter has an IF frequency from DC to 3.5 GHz, an LO frequency from 7.09 to 13.56 GHz and an RF frequency from 17.68 to 23.62 GHz. It has a conversion gain of 14 dB and an image rejection of 25 dBc. Download Datasheet | Product Details
|
| | |
|
|  | Variable Attenuator from Fairview Microwave The SA4010SMA from Fairview MIcrowave is a switchable variable attenuator that operates from DC to 6 GHz. It has an attenuation from 0 to 40 dB with a 10 dB step size and can handle up to 2 W of power. The attenuator has nickel plated aluminium body and brass SMA female connectors. The attenuation level can be changed on the fly without powering down the system, allowing test data to be read continuously. Download Datasheet | Product Details
|
| | |
|
|  | Drop-In Isolator from Renaissance Electronics Corporation The 2H2NFG from Renaissance is a high power drop-in isolator which is optimized for space applications and military radio applications. It operates from 1.02 to 1.04 GHz, has an isolation of 20 dB and an insertion loss of 0.40 dB. It can handle up to 100 W forward and reverse power levels. The isolator is available in a 1.00” x 1.25” x 0.30” steel package. Download Datasheet | Product Details
|
| | |
|
|  | Switch from Custom MMIC The CMD195C3 has an insertion loss of 2.25 dB at the low end of its bandwidth, which then reduces monotonically to 1.5 dB at the higher frequencies. The positive slope in insertion loss versus frequency allows for several of the CMD195C3s to be cascaded together without the need for additional gain equalization circuitry. Download Datasheet | Product Details
|
| | |
|
|  | Switch from Triquint The TGS2353-2-SM from Triquint is a SPDT reflective switch which operates from 0.5 to 18 GHz. It is ideal for commercial & military radar, communication, electronic warfare, test instrumentation and general purpose applications. The switch has an isolation of 1.5 dB, an isolation of 30 dB and can handle up to 10 W of power. It is available in a 4x4 mm ceramic, air-cavity QFN package. Download Datasheet | Product Details
|
| | |
|
|  | In Series Coaxial Adapter from P1dB Inc. The P1LP-ADP-NP/NP from P1dB is a N type male to male coaxial in-series adapter which operates from DC to 6 GHz. It has a low PIM of -160 dBc, a VSWR of 1.20:1 and a 500 V rating. The adapter has a connector diameter of 1.140” [29.0mm] and a connector length of 1.76” [44.6mm]. It has a passivated stainless steel body with silver plated phosphorus bronze center conductors. Download Datasheet | Product Details
|
| | |
|
