PREV 13th Nov, 2017 NEXT

Latest News & White Papers this Week

13 Nov, 2017 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 13 Nov, 2017
 
Sponsored by Linx
 
 
 
Latest News this Week
Broadcom wants to buy Qualcomm for $100 Billion - Qualcomm
Harris Completes Development of Fully Digital Navigation Payload for Future GPS III Satellites - Harris Corporation
Ainstein Introduces 77 GHz Automotive Safety Radar Based on RF CMOS Technology - Ainstein
Strong Adoption of Thread Networking Protocol Seen across the IoT Ecosystem - Thread Group
Keysight Headquarters Now Functional After Northern California Wildfires - Keysight Technologies
Researchers Develop Flexible Detector for Terahertz Frequencies based on Graphene - Chalmers
u-blox Introduces its Smallest Automotive Grade GNSS Module with an Extended Operating Temperature Range - u-blox AG
Startup Raise Funds to Scale IoT with Battery-Free Bluetooth Solution - Wiliot
HRL to Develop Man-Portable Ultra Low Frequency Radio Antennas for DARPA - HRL Laboratories
Researchers Develop Highly Sensitive and Fast Indoor GNSS Signal Acquisition Technology - KAIST
Global GPS Receiver Market to Grow Over 60% by 2021 - Technavio
Nokia and Vodacom Join Forces for 5G Deployment in South Africa - Nokia
More News
New White Papers
Solving RF Isolation Issues with RF Inductors - Coilcraft
Introduction to Interference Hunting - Signal Hound
5G and Beyond Technology Roadmap - IEEE
Where Is Wi-Fi Heading? - Qorvo
Designing a Modified Three-Level Doherty Amplifier for Use in Next-Generation Communication Systems - National Instruments
More White Papers
Upcoming Event
Event Image
ARFTG Microwave Measurement Conference 2017

Date: 28 Nov to 1 Dec, 2017

Location: Boulder, Colorado

 
More Events
Sponsored by Linx
Linx Antenna
Industry's Broadest Selection of Antennas
Linx’s Antenna Factor division has one of the industry’s broadest selections of antennas for applications with frequencies ranging from 169 MHz to 5.8 GHz. For specialized needs, custom antennas and design services are available with simulations of antenna performance to speed development. Click here to learn more.
 
 
 
Featured Products this Week
Fixed Attenuator
DC to 50 GHz, 0.5 Watt Fixed Attenuator

Fixed Attenuator from MECA

The 669-dB-1 from MECA is a 2.4 mm Male to 2.4 mm Female fixed attenuator that operates from DC to 50 GHz. It is available in attenuation values of 0, 3, 6, 10, 20 and 30 dB. The attenuator can handle up to 0.5 watts of average power and has a VSWR of less than 1.75:1.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
USB Powered Compact Spectrum Analyzer from 100 kHz to 12.4 GHz

RF Spectrum Analyzer from Signal Hound

The Signal Hound USB-SA124B is a Software Defined Radio (SDR) optimized as a spectrum analyzer. It operates from 100 kHz to 12.4 GHz with a wide dynamic range from -151 dBm to 10 dBm and a 6 MHz resolution bandwidth. The USB-SA124B is powered by a USB port, eliminating the need for a separate power supply. It is available in a compact, lightweight package making it easy to carry around.
 
Download Datasheet | Product Details
 
RF Power Meter
True RMS Power Meter with Bus-Powered USB Connectivity

RF Power Meter from National Instruments

The USB-5681 from National Instruments is a USB true RMS power meter that operates from 10 MHz to 18 GHz. It has a dynamic range from -40 to +20 dBm and a linearity of under ±0.18 dB. The device draws only 150 mA from the USB connection, making it highly suitable for mobile applications or adding to automated test applications to free up valuable rack space.
 
Download Datasheet | Product Details
 
RF Module
Ultra-Low Power Wi-Fi and Bluetooth Combo Solution for IoT Applications

RF Module from Cypress Semiconductor

The CYW43012 from Cypress is an Ultra-Low Power Wi-Fi and Bluetooth Combo Solution for wearables, smart home products and portable audio applications. The solution is IEEE 802.11a/b/g/n-compliant and 802.11ac-Friendly, meaning it is interoperable with 802.11ac access points using standard modes. The chip simultaneously supports dual-band 2.4 and 5 GHz Wi-Fi and dual-mode Bluetooth/Bluetooth Low Energy (BLE) 5.0 applications.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
Frequency Synthesizer with two RF outputs from 1.925 - 8.0 GHz and 7.7 - 16.0 GHz

Frequency Synthesizer from STMicroelectronics

The STuW81300 from STMicroelectronics is a dual architecture frequency synthesizer (Fractional-N and Integer- N) that generates two RF outputs from 1.925 - 8.0 GHz and 7.7 - 16.0 GHz. It has four integrated low phase noise VCOs with a fast automatic center frequency calibration within a single device. The synthesizer can generate a signal with a power level of 6 dBm at 6 GHz and 4 dBm at 12 GHz.
 
Download Datasheet | Product Details
 
Termination
50 Ohm and 100 Ohm High Power Chip Terminations from DC to 18 GHz

Termination from API Technologies - Inmet

The NPC20-40 series from API Inmet are chip terminations that operate from DC to 18 GHz. They can handle up to 1 Watt of power and have a VSWR of 1.25:1. The chips are fabricated on a Beryllium Oxide Ceramic substrate with a Tantalum Nitride resistor. These terminations are available in standard impedance values of 50 and 100 ohm in a 0204 (.020" x .040") footprint.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Multi-touch Signal Analyzer from 10 Hz to 26.5 GHz

RF Spectrum Analyzer from Keysight Technologies

The N9020B MXA Signal Analyzer operates from 10 Hz to 26.5 GHz (Mixers to 1.1 THz) with a 160 MHz analysis bandwidth. The analyzer has DANL of -166 dBm, phase noise of less than -114 dBc/Hz at 10 kHz offset and a dynamic range 3rd order of over 116 dB. It shortens test times with hardware-accelerated power measurements and has a multi-touch display. The analyzer comes with a 3 year warranty and upgradable to 10 years.
 
Download Datasheet | Product Details
 
RF Mixer
High Linearity Double Balanced Mixer from 3 to 20 GHz

RF Mixer from Analog Devices

The LTC5553 from Linear Technology is a microwave double balanced passive mixer that operates from 3 to 20 GHz. The mixer can be used either as an up or downconverter and integrates an LO amplifier and a wideband balun transformer on chip. It delivers outstanding linearity of 23.9 dBm IIP3 at 14 GHz, and 21.5 dBm at 17 GHz. The device has excellent port-to-port isolation, providing RF leakage of –32 dBm LO at 17 GHz.
 
Download Datasheet | Product Details
 
Horn Antenna
4 to 40 GHz Antenna for EMC and Immunity Testing

Horn Antenna from Aaronia AG

The PowerLOG 40400 from Aaronia is a horn antenna that operates from 4 to 40 GHz. It delivers a gain of up to 17 dBi and can handle a peak power of up to 300 watts. The antenna measures 74 x 55 x 38 mm, weighs 150 g and is ideal for applications in EMC and immunity tests with Spectrum Analyzer. It comes with 10 years manufacturer's warranty and is delivered including specific calibration data.
 
Download Datasheet | Product Details
 
Microwave Backhaul Radio Links
Ruggedized 60 GHz Point to point Microwave Backhaul Radio

Microwave Backhaul Radio Links from LightPointe

The IndustrialLink IL60 from LightPointe is a 60 GHz compact point-to-point radio for industrial wireless applications and harsh environments. It provides data speed of up to 1.25 Gbps (both directions) with a low latency of less than 40 µs and consumes less than 25 watts of power. This radio can operate from a flexible range of 1 foot to about one mile and is designed for situations prone to vibration, movement, and varying distances between radios.
 
Download Datasheet | Product Details
 
RF & Microwave Circulator
Low Loss Drop-In Circulators from 824 to 4200 MHz

RF & Microwave Circulator from VidaRF

VidaRF has developed a range of drop-in circulators with low IMD that operate from 824 to 4200 MHz. The circulators have an insertion loss of below 0.3 dB and an Isolation of over 20 dB. They can handle up to 250 watts of average forward power and 250 watts of reverse power and up to 500 watts of peak power. The circulators are BeO Free and RoHS complaint. These are ideal for wireless infrastructure applications.
 
Download Datasheet | Product Details
 
Band Pass Filter
SMT Bandpass Filters from 5 to 30 GHz with 5% Bandwidth

Band Pass Filter from Lark Engineering

The FH Series from LARK Engineering are bandpass filters that operate from 5 to 30 GHz with a bandwidth of 2% to 5%. These bandpass filters can be customized to have 3 to 5 sections and a return loss of more than 10 dB. Insertion loss depends on the number of sections, configuration, and type of substrate used. The filters are available in a surface mount package and can be easily interconnected with other printed circuit boards such as Micro-strip, CPW, Strip line, etc.
 
Download Datasheet | Product Details
 
SAR Measurement System
700 MHz to 6 GHz SAR Test System

SAR Measurement System from ART-FI

The ART-MAN SAR Measurement System from ARF-FI is based on RF probe-array and amplitude/phase patented measurement technology. This system can be used to test a variety of communication modes (GSM, WCDMA, WLAN and LTE) from 0.7 GHz to 6 GHz range. It can also test 1G/10G peak spatial-average SAR from simultaneous multi-frequency transmitters in a single measurement and has full 3D Specific Absorption Rate assessment with high absolute accuracy in a matter of seconds.
 
Download Datasheet | Product Details
 
Wireless Charging Solution
15 Watt Qi Compliant Wireless Charging Transmitter

Wireless Charging Solution from Integrated Device Technology

The P9242-R from IDT is a highly-integrated 15 W magnetic induction wireless power transmitter for the WPC-1.2.2 specification (Qi-compliant). It can handle a wide input voltage range of 4.25 V to 21 V, while consuming very low power in standby mode and operates at 87 percent efficiency. The transmitter includes a 32-bit ARM Cortex-M0 processor, foreign object detection (FOD), full bridge drivers and on-chip simultaneous voltage and current demodulation.
 
Download Datasheet | Product Details
 
Antenna
High Gain, MIMO Yagi Antenna for the Licensed 700 MHz Band

Antenna from PCTEL

The BMYD757K-DP from PCTEL is a MIMO, high gain, Yagi antenna that operates from 757 to 788 MHz. This dual polarized has been designed to provide point-to-point, field area, and point-to-multipoint connectivity over long distances and in harsh conditions. This antenna has been developed for the licensed 700 MHz spectrum, supporting a wide variety of industrial, utility, and public safety applications.
 
Download Datasheet | Product Details
 
Wireless SoC
Wave-2 802.11ac SoC for Routers, Gateways and Access Points

Wireless SoC from Qualcomm

The IPQ4019 from Qualcomm is a single-chip Wi-Fi system-on-chip (SoC) for Wave-2 802.11ac. This highly-integrated, single-chip design combines dual-band 11ac, advanced Wi-Fi features and network processing in a variety of configurations for high-performance, power-efficient and cost-effective network infrastructure products.
 
Download Datasheet | Product Details
 
Sponsored by Linx
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 200,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]