PREV 22nd Nov, 2017 NEXT

New RF & Microwave Products this Week

22 Nov, 2017 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 22 Nov, 2017
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
Down Converter
RF Down-converter for 5G Signals from 27 to 30 GHz

Down Converter from ThinkRF

The D2030 from ThinkRF is a RF Downconverter that downconverts an input RF frequency from 27 to 30 GHz to an intermediate frequency (IF) from 3.55 GHz to 5.6 GHz. It has a real time bandwidth of 160 MHz with a tuning resolution of 100 kHz. The device consumes 6 W of power while operating at +12 VDC, that allows it to be powered by an external battery, vehicle power outlet or standard power supply with plug adaptor.
 
Download Datasheet | Product Details
 
180 Degree Hybrid Coupler
100 W, 180° Hybrid Combiner/Divider from 2 to 6 GHz

180 Degree Hybrid Coupler from Werlatone Inc

The H10298 from Werlatone is a 180 degrees hybrid coupler that operates from 2 to 6 GHz. It provides an isolation of more than 20 dB, insertion loss of under 1 dB and amplitude balance of 0.4 dB. This 3 dB coupler can handle up to 100 watts of CW power and has a VSWR of below 1.35:1. It is available in a module with SMA connectors.
 
Download Datasheet | Product Details
 
RF Transistor
220 W CW LDMOS Transistor for Cooking Applications

RF Transistor from NXP Semiconductors

The MHE1003N from NXP is a RF Power LDMOS Transistor that operates from 2400 to 2500 MHz. This transistor has been developed for use in consumer and commercial cooking applications. It provides up to 230 watts of CW power with a gain of over 11.5 dB and has a PAE of 62%. This device requires a 26 V supply and is internally matched to 50 ohms.
 
Download Datasheet | Product Details
 
Antenna
8-Port Multibeam Panel Antenna from 698 to 894 and 1710 to 2170 MHz

Antenna from CommScope

The 2UNPX203.6R2 from Commscope is a 8-Port Multibeam Antenna with 4-ports operating from 698 to 894 MHz and other 4-ports from 1710 to 2170 MHz. It provides a gain of more than 13.8 dBi and can handle a power of up to 500 W. The antenna has a single panel design that supports two separate beams perfectly optimized at horizontal pointing angles of +27 degrees and -27 degrees from boresight. It has a port to port isolation of over 20 dB.
 
Download Datasheet | Product Details
 
RF Amplifier
L-Band/S-Band Bidirectional Amplifier from 1.5 to 2.5 GHz

RF Amplifier from NuWaves Engineering

The NuPower XtenderTM 12B04A-07 from NuWaves is a bi-directional amplifier that operates from 1.5 to 2.5 GHz. This L-Band/S-Band amplifier provides 2.5 watts of linear power (5% EVM at 34 dBm). This compact and light weight bi-directional amplifier is ideal for extending the communication range of half duplex L or S-band transceivers running constant-envelope or near-constant-envelope waveforms.
 
Download Datasheet | Product Details
 
RF Switch
High-Voltage MEMS SPST Digital-Micro-Switch from DC to 750 MHz

RF Switch from Menlo Micro

The MM7100 from Menlo Micro is a high-voltage SPST Digital-Micro-Switch that operates from DC to 750 MHz. The innovative DMS technology enables highly reliable micro-mechanical switches capable of carrying high voltage and high current in a small SMT form factor. This MEMS based switch provides ultra-low on-state resistance and high off-state isolation, with greater than 3 billion switching cycles guaranteed at +85ºC.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Mouser
Mouser Stocks Digi International XBee Cellular 3G Development Kit
Digi International XBee Cellular 3G Development Kit offers a simple, quick way to integrate cellular connectivity into devices using the Digi XBee 3G Embedded Modem. This kit delivers reliable, low-power cellular communications for OEM devices like sensors and control/monitoring systems. Click Here to Learn More.
 
 
 
RF & Microwave Isolator
27 to 31 GHz, 2 Watts Coaxial Isolator

RF & Microwave Isolator from MECA

The IK-29.000 from MECA is a coaxial isolator that operates from 27 to 31 GHz. It has an insertion loss of 0.5 dB and provides an isolation of over 20 dB. The isolator can handle up to 2 watts of average power and up to 30 watts of peak power. The isolator has 2.92 mm female stainless steel connectors.
 
Download Datasheet | Product Details
 
Block Up Converter
40 W Block up Converter with RF Frequency from 27.5 to 31 GHz

Block Up Converter from Actox

The ABC40UKA from Actox is a Block Up Converter which upconverts an input frequency from 950 MHz to 1950 MHz to an RF frequency from 27.5 to 31 GHz (Quad - L.O. 26.55, 27.4, 28.05 and 29.05 GHz). The BUC delivers an output power of 40 watts with a small signal gain of over 60 dB. It works on a wide range of supply voltages from 36 V to 60 V, while consuming up to 340 W of power.
 
Download Datasheet | Product Details
 
RF Mixer
7.5 to 13 GHz High IP3 SMT I/Q Mixer

RF Mixer from Custom MMIC

The CMD258C4 is a surface mount compact I/Q mixer with a RF/LO frequency from 7.5 to 13 GHz and IF Frequency from DC to 3.5 GHz. It has a low conversion loss of 5.5 dB, high LO to RF isolation of 38 dB, and an input IP3 of 25 dBm across the bandwidth. The CMD258C4 can be configured as an image reject mixer or single sideband upconvertor by utilizing two double balanced mixer cells and a 90 degree hybrid. An external IF hybrid is needed to complete the image rejection.
 
Download Datasheet | Product Details
 
Fixed Attenuator
Low PIM Fixed Attenuator from DC to 6.5 GHz

Fixed Attenuator from API Technologies - Weinschel

The Model 254 LIM from API Weinschel are low PIM fixed attenuators that operates from DC to 6.5 GHz. This series of attenuators are available in multiple attenuation configurations from 10 to 40 dB (10, 20, 30 and 40 dB) and have a low PIM of up to -150 dBc. The Attenuators can handle up to 175 watts of average power and 10 kilowatts of peak power.
 
Download Datasheet | Product Details
 
Antenna
Chip Antenna from 698-960 MHz and 1710-2690 MHz

Antenna from Fractus Antennas

The FR01-S4-210 from Fractus Antennas is a chip antenna for GSM, UMTS and LTE that operates from 698 - 960 MHz and 1710 - 2690 MHz. It provides a gain of up to 2.4 dBi with an efficiency of more than 55%. The antenna measuring 30 x 3 x 1 mm is built on a glass epoxy substrate.
 
Download Datasheet | Product Details
 
USB Power Sensor
Directional Power Sensor from 2 MHz to 2.7 GHz

USB Power Sensor from Bird Technologies

The 5010B from Bird Technologies is a directional power sensor that operates from 2 MHz to 2.7 GHz. It provides both forward and reflected composite power measurements with ±8 % of full scale accuracy and has a power range from 125 mW to 1 kW and is also NIST traceable. This sensor is available in a module that measures 58 x 53 x 89 mm with N-type female connectors. It can be controlled using a complimentary Virtual Power Meter (VPM3) software provided by Bird.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
 
 
 
Front End Module
5 GHz Wi-Fi Front End Module

Front End Module from Qorvo

The QPF4538 from Qorvo is a Wi-Fi front end module designed for Wi-Fi 802.11a/n/ac systems that operates from 4900 to 5925 MHz. It integrates a 5 GHz power amplifier, SPDT switch and bypassable low noise amplifier into a single device. The FEM provides a transmit gain of 30 dB and an output power of 21 dBm while consuming 0.5 W.
 
Download Datasheet | Product Details
 
RF Switch
0.1 to 8.0 GHz PIN Diode SPDT Switch

RF Switch from Ducommun

The CPD-04082580-A1 from Ducommun is an absorptive PIN Diode SPDT Switch that operates from 0.1 to 8 GHz. It has a low noise figure, high isolation and is well matched even in the OFF state. The switch can handle up to 23 dBm of power and is available in a connectorized module with SMA connectors that measures 1.2 x 0.95 x 0.46 inches.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
9 kHz to 6 GHz Remote Analyzer with Receiver Characteristics

RF Spectrum Analyzer from Narda Safety Test Solutions

The NRA-6000 RX is remote analyzer that operates from 9 kHz to 6 GHz. It has a frequency resolution (RWB) from 10 Hz to 20 MHz and a display range from -150 dBm to 21 dBm. It is especially suitable for radio monitoring. The NRA-6000 RX provides comprehensive analysis of all radio frequency ranges including the latest mobile communications bands (from TETRA through to GSM, UMTS, WiMAX and LTE).
 
Download Datasheet | Product Details
 
Balun
1:1 SMT Transformer from 5 MHz to 3000 MHz

Balun from MiniRF

The RFXF9504 from Mini RF is a transformer that operates from 5 MHz to 3000 MHz. It has been designed for applications that require small, low cost, and highly reliable surface mount components. The transformer has an insertion loss of less than 3 dB and can handle up to 1 W of power. It is available in tape and reel SMT package and are matched to 50 Ohms. It is RoHS compliant and Pb-Free.
 
Download Datasheet | Product Details
 
Antenna
GSM/3G Penta Band Hybrid PCB Antenna

Antenna from Pulse Electronics

The W3544B from Pulse Electronics is a GSM/3G Penta Band Hybrid PCB Antenna that operates from 824 to 960 and 1710 to 2170 MHz. It delivers a gain of up to 1.9 dBi and has 6 SMD connection points underneath the antenna for board connection. The surface mount antenna measures 7.65 x 26 x 3 mm and is ideal for GSM/3G routers, femto cell modems, smart grid devices and mobile hotspots.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the latest RF & Microwave product releases. We identify new products from the leading manufacturers in the industry. We have over 200,000 products listed from more than 1,000 manufacturers.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]