PREV 18th Dec, 2017 NEXT

Latest News & White Papers this Week

18 Dec, 2017 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 18 Dec, 2017
 
Featured Interview this Week
Kevin Miyashiro Interview
Interview with Kevin Miyashiro from MicroTau
everything RF Interviewed Kevin Miyashiro, the CEO and co-founder of MicroTau, a startup dedicated to helping companies shrink their time-to-market by accelerating pre-production tests. They have developed CloudGate which enables users to connect their existing test equipment to the cloud without needing to upgrade to the latest model. Click here to read the interview.
 
 
 
Latest News this Week
Is there Enough Spectrum Available to Support the Expected IoT Growth? - GAO
R&S Introduces Realtime Radar Scenario Simulator Based on Pulse Descriptor Word Streaming - Rohde & Schwarz
Innovative RF circulator with Tunable Signal Isolation of Over 70 dB - AFRL
Verizon Using Ericsson Equipment for 5G Commercial Rollout in the US - Ericsson
Industry's Lowest-Power Wireless MCU and Connectivity Solutions for Battery-Operated IoT Devices - Redpine Signals
AFRL Researchers Develop Flexible GaN for High Performance RF Devices - AFRL
Verizon Opens 5G Innovation Lab in NYC Silicon Alley - Verizon
Anritsu Universal Wireless Test Set Now Supports NB-IoT Functionality - Anritsu
Communications-technology Startup Secures $7 Million from Intel - GenXComm
Researchers Develop a Miniature Zero-Power Radio Receiver that Can Provide Continuous Wireless Connectivity - Sandia National Laboratory
Smiths Interconnect Introduces Powerful Test Probe Series for Wafer Level Chip Testing - Smiths Interconnect
Merging of DAS and Small Cell Systems Could Disrupt the In-Building Wireless Market - ABI Research
More News
New White Papers
Design and Matching of a 60 GHz Printed Antenna Using NI AWR Software and AWR Connected for Optenni - National Instruments
Characterization of LoRa Devices - Rohde & Schwarz
Bringing Together Numerical Simulation and Antenna Measurement to Understand Deployed Antenna Performance - Microwave Vision Group
Combining Near-Field Measurement and Simulation for EMC Radiation Analysis - Altair
A Comparison of PMP 450 and LTE in 3 GHz - Cambium Networks
More White Papers
Upcoming Event
Event Image
EMV 2018

Date: 20 to 22 Fabruary, 2018

Location: Dussseldorf, Germany

 
More Events
Featured Products this Week
RF Test Set
Universal Wireless Test Set from 10 MHz to 6 GHz

RF Test Set from Anritsu

The MT8870A from Anritsu is a Universal Wireless Test Set specifically designed for the high volume manufacturing test of cellular and wireless connectivity systems. This wireless test set operates from 10 MHz to 6 GHz. It has 160 MHz measurement bandwidth for WLAN 802.11ac and supports multiple wireless standards including LTE, TD-SCDMA, GNSS, ZigBee and Bluetooth.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
4-Port USB Vector Network Analyzer, 100 kHz to 20 GHz

Vector Network Analyzer from Copper Mountain Technologies

The C1420 is a 4-port computer controlled vector network analyzer that operates from 100 kHz to 20 GHz. It can handle advanced test applications, providing an unmatched price-performance combination for S-parameter measurement in the supported frequency band. The VNA offers a typical dynamic range of 133 dB (10 Hz IF BW), and sweep speeds as low as 12 microseconds per point. It can be controlled using any Windows PC or laptop.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
Table Top RF Shielded Test Enclosure for 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G Device Testing

RF Shielded Test Enclosure from RF Electronics

The HDRF-1070 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz (options up to 60 GHz are available). It has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 2.4 GHz in each chamber. It has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
Fixed Attenuator
20 W Coaxial Fixed Attenuators from DC to 40 GHz

Fixed Attenuator from API Technologies - Weinschel

The Model 89 Series of coaxial fixed attenuators operate from DC to 40 GHz. They can handle an input power of up to 20 Watts (CW) and are available with attenuation levels of 10 dB, 20 dB and 30 dB. The attenuators have a VSWR less than 1.40:1 and are matched to 50 ohms. They are available with 2.92 mm male/female connector types.
 
Download Datasheet | Product Details
 
RF Amplifier
L-Band/S-Band Bidirectional Amplifier from 1.5 to 2.5 GHz

RF Amplifier from NuWaves Engineering

The NuPower XtenderTM 12B04A-07 from NuWaves is a bi-directional amplifier that operates from 1.5 to 2.5 GHz. This L-Band/S-Band amplifier provides 2.5 watts of linear power (5% EVM at 34 dBm). This compact and light weight bi-directional amplifier is ideal for extending the communication range of half duplex L or S-band transceivers running constant-envelope or near-constant-envelope waveforms.
 
Download Datasheet | Product Details
 
Wireless Charging Solution
Low Power Wireless Charger for Hearing Aids

Wireless Charging Solution from Linear Technology

The LTC4123 is a wireless charging receiver which has been optimized for low power applications. It combines a 30mW wireless receiver with a constant current/constant voltage linear charger for NiMH batteries, such as Varta's power one ACCU plus series. An external resonant LC tank connected to the chip enables the IC to receive power wirelessly from an alternating magnetic field generated by a transmit coil.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
100 Hz to 50 GHz Spectrum Analyzer

RF Spectrum Analyzer from Micran

The Micran SK4M-50 Spectrum Analyzer operates from 100 Hz to 50 GHz with a resolution bandwidth from 1 Hz to 10 MHz. The analyzer has a Third-order intercept (TOI) level up to +20 dBm, a DANL < -165 dBm/Hz and a low phase noise of -125 dBc/Hz at 1 GHz signal from 100 kHz offset. It has an in-built input attenuator, a thermostatic YIG-preselector and a low-noise amplifier.
 
Download Datasheet | Product Details
 
Bias Tee
0.100 to 40 GHz Bias Tee for Wireless Band Applications

Bias Tee from MECA

The 209K-MF-5 from MECA is a Bias Tee that operates from 0.100 to 40 GHz. It has an insertion loss of under 3 dB, an isolation 30 dB and a VSWR of 1.80:1. The Bias Tee can handle an input current of up to 150 mA with Max DC Voltage Handling of 25 V. It has a low PIM of less than -155 dBc. The 209K-MF-5 is available in a module with 2.92 mm connectors and is ideal for remote powering of bi-directional amplifiers (BDAs), repeaters and tower top amplifiers (TTAs) by BTS control modules.
 
Download Datasheet | Product Details
 
Microwave Backhaul Radio Links
Multi-Gigabit Microwave Radio from 6 to 42 GHz

Microwave Backhaul Radio Links from BridgeWave

The NAVIGATOR DT is a licensed microwave radio system that operates from 6 to 42 GHz. It can achieve data rates up to 3 Gbps per radio using a single carrier per transceiver and 5.5 Gbps using dual sub-carriers per transceiver, without requiring any additional equipment. The backhaul includes XPIC and MIMO frequency re-use technologies to double capacity using a single licensed channel. XPIC and 2+0 operation are supported using just a single radio.
 
Download Datasheet | Product Details
 
RF Amplifier
V-Band Power Amplifier from 50 to 70 GHz

RF Amplifier from SAGE Millimeter

The SBP-5037032518-1515-E1 from Sage Millimeter is a V-Band Power Amplifier that operates from 50 to 70 GHz with 25 dB of small signal gain. The amplifier requires a 8 V supply and draws 650 mA of current. It has an in line mechanical configuration with WR-15 waveguides and UG-385/U flanges. Other port configurations, such as with 1.85 mm connectors or a right angle structure with WR-15 waveguides, are also available under different model numbers.
 
Download Datasheet | Product Details
 
GNSS Module
Ultra Small Multi-GNSS Receiver Module

GNSS Module from u-blox AG

The ZOE-M8Q from u-blox is an ultra-compact GNSS (Global Navigation Satellite System) receiver module that has exceptionally high location accuracy by concurrently connecting to GPS, Galileo and either GLONASS or BeiDou with an excellent navigation sensitivity of -167 dBm. It is a fully integrated module, with a built-in SAW-filter and Low Noise Amplifier (LNA). This device can be used directly with passive antennas, without the need for additional components.
 
Download Datasheet | Product Details
 
RF Mixer
GaAs MMIC Triple Balanced Mixer with 1.5 to 13 GHz RF/LO

RF Mixer from Marki Microwave

The MT3-0113HCQG is a triple balanced passive diode GaAs MMIC mixer which has an LO/RF frequency from 1.5 to 13 GHz and IF frequency from 0.01 to 7 GHz. It provides a high dynamic range, low conversion loss of 7.5 dB and excellent repeatability. Like all Marki T3 Mixers this one also has excellent nonlinear performance in terms of IIP3, P1dB, and spurious performance with a flexible LO drive requirement from +16 dBm to +24 dBm.
 
Download Datasheet | Product Details
 
Block Up Converter
500 W Ka-band Block Up Converter for Satellite Uplink Applications

Block Up Converter from Agilis

The ALB210 Series from Agilis are Ka-band Block Up Converters which upconverts an input frequency from 950 MHz to 1950 MHz to an RF frequency from 27.5 to 31 GHz. The BUCs deliver an output power of 500 watts with a small signal gain of 75 dB. They work on a wide range of supply voltages from 96 V to 264 V, while consuming up to 3.5 kW of power. They are available in a module that measures 700 x 650 x 212 mm with N-type female connectors and are ideal for satellite uplink applications.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
7-bit Digital PIN Attenuator from 0.5 to 20 GHz

RF Variable Attenuator from AtlanTecRF

The ADA-500-2000-60/0.5 from AtlanTecRF is a 7-bit Digital Control PIN Attenuator that operates from 0.5 to 20 GHz. The attenuator has an attenuation range of 60 dB with a 0.5 dB step size. The attenuator has a fast switching speed of under 200 ns and can handle an input power of up to 25 dBm. It is available in a module that measures 45 x 30 x 12 mm with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
Successive Detection Log Video Amplifier from 0.1 to 2 GHz

RF Amplifier from Planar Monolithics Industries

The SDLVA-0120-70-100M2G-10DBM from PMI RF is a successive detection log video amplifier (SDLVA) that operates between the 0.1 to 2.0 GHz. It has a dynamic range of over 70 dB and a TSS of -65 dBm. This unit offers a maximum rise time of 25 ns and a fall time of 30 ns. This model provides a limited IF output of +10 dBm typically.
 
Download Datasheet | Product Details
 
Waveguide Switch
4-Port Manual Waveguide Switches from 18 to 110 GHz

Waveguide Switch from HXI

The HMSW Series from HXI is a family of manual waveguide 4-port switches that operate from 18 GHz to 110 GHz (WR-42 through WR-10). They have 3-channel rotors which can be adjusted to eight 45 degree positions which allow connections and isolation between any 2 ports. The switches have an insertion loss under 0.8 dB, an isolation of more than 60 dB and VSWR of 1.15:1. They are ideal for test instrumentation applications.
 
Download Datasheet | Product Details
 
The Largest RF & Microwave Company Directory
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, event coverage, white papers, technical content and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]