1. everything RF
  2. RF Newsletters
more
PREV 5th Feb, 2018 NEXT

Latest News & White Papers this Week

5 Feb, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 5 Feb, 2018
 
Sponsored by Rohde & Schwarz
 
 
 
Latest News this Week
Broadcom Discontinues Over 1,000 RF/MMIC Products from its Catalog - Broadcom
Nokia ReefShark Chipsets to Deliver Massive Performance Gains to 5G Networks - Nokia
Baseline Specifications for the 3.5 CBRS Band are Now Complete - WInnForum
Beamforming Antenna Supports 3.5 GHz Band Applications for LTE & 5G - Radio Frequency Systems
NI and Shanghai University Collaborate on a 5G Ultra-Reliable Low-Latency Testbed for V2X Communications - National Instruments
Anritsu's New Software Packages Provide Production Line Testing for 802.11ax Compliant Devices - Anritsu
Nokia Launches World's First Small Cell Base Station Based on MulteFire Technology - Nokia
Qualcomm to Provide RF Front-End Solutions to Chinese Mobile Manufacturers - Qualcomm
Intel, Huawei & Deutsche Telecom Conduct World’s First Fully Compliant Testing of the 5G-NR Standard - Intel
New RF SOI Process Enables the Development of Low-Noise Amplifiers with Integrated Switches for Smartphone Applications - Toshiba
New R&S Power Rail Probes with Wide Bandwidths Uncover Coupled Signals in 2.4 GHz ISM, 3 GHz LTE Circuits - Rohde & Schwarz
Skyworks Collaborates with Broadcom on 802.11ax Max WiFi Platforms - Skyworks
More News
New White Papers
Narrowband Internet of Things Measurements - Rohde & Schwarz
Design and Matching of a 60-GHz Printed Antenna - National Instruments
3D Printing Wireless Connected Objects - University of Washington
An Introduction to Practical Real-Time Spectrum Analysis - Signal Hound
What are Gunn Diode Oscillators? - Sage Millimeter
More White Papers
Upcoming Event
Event Image
embedded World 2018

Date: 27 February to 1 March, 2018

Location: Nürnberg, Germany

 
More Events
Visit Rohde & Schwarz at Mobile World Congress 2018
Rohde & Schwarz
Optimizing the present. Designing the future.
Visit Rohde & Schwarz at Mobile World Congress 2018 and learn about the most advanced Test & Measurement solutions from the mobile communcations industry. Our solutions support the entire cellular lifecycle, from device and infrastructure development, certification and production to network deployment, optimization and security. Click here to learn more.
 
 
 
Featured Products this Week
RF Variable Attenuator
7-bit Solid State Attenuators from 20 MHz to 3 GHz

RF Variable Attenuator from dBm Corporation

The SSA series of solid state attenuators from dBm are 7-bit Digital Attenuators that operate from 20 MHz to 3 GHz. These attenuators have an attenuation range from 0 to 95 dB with a resolution of 1 dB. They have an insertion loss of under 7.5 dB and a fast switching speed of less than 16 us. The attenuators are available in a module that measures 3.2 x 1.4 x 0.75 inches with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
NuWaves' Flagship L & S-Band 10 Watt SSPA

RF Amplifier from NuWaves Engineering

The NuPower NW-PA-12B01A is a RF power amplifier (PA) for L and S Band transmitters and data radios that operate from 1000 to 2500 MHz. The amplifier provides over 10 Watts of RF power with a power efficiency in the 30% to 50% range, and 40 dB of RF gain. The PA is available in a rugged aluminum chassis that measures 3 x 2 x 0.65.
 
Download Datasheet | Product Details
 
Waveguide Amplifier
Low Noise Waveguide Amplifier form 110 to 130 GHz

Waveguide Amplifier from SAGE Millimeter

The Model SBL-1141341570-0606-E1 from Sage Millimeter is a low noise amplifier that operates from 110 to 130 GHz with a small signal gain of 15 dB and noise figure less than 7 dB. It requires a 8 V DC supply and consumes 75 mA of current. The amplifier has WR-06 waveguides and UG-387/U-M flanges.
 
Download Datasheet | Product Details
 
Fixed Attenuator
Fixed Coaxial Attenuators from DC to 26.5 GHz

Fixed Attenuator from API Technologies - Weinschel

The Model 56 Series of coaxial fixed attenuators operate from DC to 26.5 GHz. They can handle an input power of up to 2 Watts (CW) and are available with attenuation levels of 3 dB, 6 dB, 10 dB, 20 dB and 30 dB. The attenuators have a VSWR less than 1.25:1 and are matched to 50 ohms. They are available with 3.5 mm connector types.
 
Download Datasheet | Product Details
 
Microwave Backhaul Radio Links
Sub-6 GHz Non-Line-of-Sight Microwave Backhaul System

Microwave Backhaul Radio Links from DragonWave

The HARMONY RADIO LITE from DragonWave is a fully integrated Microwave Backhaul radio that operates from 2.3 to 5.8 GHz. It achieves high spectral efficiency delivering data rates up to 230 Mbit/s. The backhaul provides non-line-of-sight (NLOS) support across both licensed and unlicensed TDD spectrum and has a channel bandwidth of 20/40 MHz.
 
Download Datasheet | Product Details
 
RF Module
2-in-1 Bluetooth Low Energy and LoRa Module

RF Module from Telit Communications

The RE866 from Telit is an ultra-low power LoRa certified module that also supports Bluetooth Low Energy (V5). It contains two radios, allowing customers to use this module either as a Sub-gigahertz (Sub-GHz) or 2.4 GHz module. The module has an integrated antenna for BLE and an external antenna for Sub-GHz applications.
 
Download Datasheet | Product Details
 
Microwave Backhaul Radio Links
Licensed Microwave Backhaul Radio from 6 to 38 GHz

Microwave Backhaul Radio Links from Cambium Networks

The PTP 820G from Cambium Networks is a Microwave Backhaul Radio that operates from 6 to 38 GHz with a channel bandwidths of up to 80 MHz. It provides high system gain and multi-gigabits radio capacity with high spectral efficiency. The radio is available as a slip-mount/all-indoor unit that measures 44 x 426 x 180 mm and weighs 2.5 kg.
 
Download Datasheet | Product Details
 
Power Divider
300 W 4-Way Power Divider from 700 to 6000 MHz

Power Divider from Innovative Power Products

The IPP-1271 from Innovative Power Products is a 4-way power divider that operates from 700 to 6000 MHz. It has an insertion loss of less than 1.1 dB with an isolation of more than 6.5 dB. The divider can handle up to 300 watts of power and has a VSWR of under 1.35:1. It is available in a module that measures 3.90 x 5.20 inches with N-type female connectors.
 
Download Datasheet | Product Details
 
RF Test Set
Wireless Test Set for Evaluating 802.11ac WLAN Devices

RF Test Set from Anritsu

The MT8862A from Anritsu is an advanced one-box wireless connectivity test set to verify the performance of WLAN devices in their actual operating state. This is the first test set of its kind to support all IEEE802.11ac/n/a/g/b standards. It uses the Network Mode to measure RF performance characteristics, such as Tx power and Rx sensitivity (PER) of the target WLAN device under test (DUT).
 
Download Datasheet | Product Details
 
Vector Network Analyzer
10 MHz to 50 GHz, 2 Port and 4 Port Vector Network Analyzer

Vector Network Analyzer from Keysight Technologies

The N5245B from Keysight is a 2-Port and 4-Port Vector Network Analyzer that operates up to 50 GHz. This analyzer is part of the PNA-X Series of High Performance VNA's from Keysight with VNA's that operate up to 110 GHz. The PNA-X VNA's bring speed, accuracy, and ease-of-use to common RF measurements, in coaxial, fixtured, and on-wafer environments.
 
Download Datasheet | Product Details
 
Antenna Analyzer
Portable Spectrum/Antenna Analyzer - Frequency ranges from 100 kHz to 3.6 GHz or 8 GHz

Antenna Analyzer from Rohde & Schwarz

The R&S ZVH Series of handheld Antenna/Spectrum Analyzers from Rohde & Schwarz operate from 100 kHz to 8 GHz. The series has an average noise level from -115 dBm to -150 dBm displayed on the analyzer, power of 40 dBm and dynamic range of 100 dB for filter and antenna isolation measurements. It has a battery life up to 4.5 hours and can be used in military, defense, aerospace and commercial applications.
 
Download Datasheet | Product Details
 
RF Amplifier
Ultra to Low Noise Amplifier Tuning Range: 0.7 to 2.7 GHz

RF Amplifier from Guerrilla RF

The GRF2071 is a broadband, linear, ultra-low noise amplifier that can be tuned from 0.7 to 2.7 GHz. At 1.9 GHz, it provides a gain of 19.0 dB with a noise figure of 0.35 dB. The LNA delivers a P1dB of 3 dBm, IIP3 of 20 dBm while operating at 5 volts and consuming 55 mA of current. It is available in an ultra-small 2 x 2 mm DFN-8 package and is ideal for small cells, cellular boosters, wireless infrastructure, military grade GPS and DAS applications.
 
Download Datasheet | Product Details
 
RF Switch
High Power Symmetrical SPDT RF Switch from 1 to 1000 MHz

RF Switch from Aethercomm

The SSHPS 0.001-1.00-500 from Aethercomm is a SPDT switch that operates from 1 MHz to 1000 MHz. This high power switch can handle signals up to 500 watts and is ideal for use in communication and Electronic Warfare systems. It has a low insertion loss, high isolation and requires a 28 V supply. It has a fast switching speed of 6-8 uSec and meets most military standards. It is available in a module with connectors.
 
Download Datasheet | Product Details
 
Antenna Alignment Tool
Antenna Alignment Tool with Built-in HD Camera

Antenna Alignment Tool from 3Z Telecom

The RF Vision Antenna Alignment Tool from 3Z Telecom is one of the only tools that has an in-built camera to help engineers better align antennas. The device uses augmented reality to help the tower technician align the antenna by simply aligning the crosshair with the bullseye, that makes antenna alignment easier than ever before.
 
Download Datasheet | Product Details
 
RF Spectrum Recording and Playback System
Lightweight, Portable and Rugged Intelligent Signal Scanning Recorder up to 3 GHz

RF Spectrum Recording and Playback System from Pentek

The Talon® RTR 2613 combines Pentek’s Sentinel Intelligent Signal Scanning software with real-time recording in a lightweight, portable and rugged package. The system provides SIGINT engineers the ability to scan the spectrum from DC to 3 GHz for signals of interest and monitor or record bandwidths up to 40 MHz once a signal band of interest is detected.
 
Download Datasheet | Product Details
 
Directional Coupler
20 dB Directional Coupler from 0.5 to 18 GHz

Directional Coupler from MegaPhase

The DC36-20S-9.2G from MegaPhase is a Directional Coupler that operates from 0.5 to 18 GHz. It has a coupling value of 20 dB, directivity of over 14 dB and an insertion loss of under 1.3 dB. The coupler can handle up to 25 watts of power and has a VSWR of 1.50:1. It is available in a module with SMA connectors.
 
Download Datasheet | Product Details
 
RF Transistor
60 Watt, 2-Stage LDMOS Transistor from 2.4 to 2.5 GHz

RF Transistor from Ampleon

The BLM2425M7S60P from Ampleon is a dual path, 2-stage power MMIC transistor that operates from 2400 MHz to 2500 MHz. It provides an output power of 60 watts with a power gain of 27.5 dB and a drain efficiency of 45%. It is available in a plastic package and is ideal for Industrial, Scientific and Medical (ISM) applications.
 
Download Datasheet | Product Details
 
Sponsored by Rohde & Schwarz
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave industry. We provide the latest news and white papers, information on new products, upcoming events, conduct interviews and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]