Product Update - Day 2 & 3 from the IMS 2014 | |
|
 Products Showcased at the IMS 2014 - Day 2 & 3 |
|
|  | RF Mixers from Texas Instruments Inc. The new dual-channel down-converting mixer family matches the performance of existing solutions at half the power consumption. The mixers can be used in diversity receive, multi-antenna and high-performance applications, such as phased-array radar, wireless base stations, RF backhaul and repeaters, and test and measurement. They operate from 300 MHz to 3800 MHz with a 29 dBm IIP3, 10 dB gain and 9.5 dB noise figure. These mixers use 500 mW of power per channel. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifiers from Texas Instruments Inc. The RF Gain Blocks from TI are general purpose gain blocks with a broadband frequency range from 1 MHz to 6 GHz. They operate at 3.3 V and 5 V with a gain of up to 20 dB and OIP3 of 10 dBm. The amplifiers are available in a compact 2 x 2 mm QFN package with an integrated power down that eliminates the need for an external switch. These devices can be used in many industrial, communications and defense applications, such as smart meters, test and measurement, wireless base stations, RF backhaul, repeaters, and phased-array radar. Download Datasheet | Product Details
|
| | |
|
|  | Vector Network Analyzer from Anritsu The MS46322A is a series of Economy ShockLine™ Vector Network Analyzers with a frequency range from 1 MHz to 4/8/14/20/30/40 GHz. They are 2-port VNAs packaged in a compact and rugged 2U chassis. The entire series has 220 microseconds per point sweep speed, and better than 100 dB dynamic range to 40 GHz, making it suitable for testing passive devices in engineering, manufacturing and cost-sensitive education applications. Download Datasheet | Product Details
|
| | |
|
|  | Phase Locked Loop from Analog Devices The ADF5355 is a microwave wideband synthesizer with an integrated VCO. It allows the implementation of fractional-N or integer-N phase-locked loop (PLL) frequency synthesizers when used with an external loop filter and external reference frequency. The wideband microwave VCO design permits frequency operation from 7 MHz to 14 GHz at one RF output. Download Datasheet | Product Details
|
| | |
|
|  | RF Mixer from Marki Microwave The ML1-1050 from Marki Microwave is a Microlithic™ double balanced mixer with a RF Frequency from 10 to 50 GHz, a LO Frequency from 10 to 50 GHz and an IF Frequency from DC to 16 GHz. The mixer has a conversion loss of 8 dB, LO/RF Isolation of 43 dB and LO/IF Isolation of 20 dBm. It has a P1dB of 3 to 9 dBm and an IP3 of 13 to 19 dBm. The ML1-1050 is available as a wire bondable chip or a 2.4 mm connectorized package. It is an excellent alternative to Marki Microwave M9 mixers packaged in drop-in carriers such as the ES carrier. Download Datasheet | Product Details
|
| | |
|
|  | Directional Couplers from MECA The LP715-XX-1.650W is a series of low PIM directional couplers that operates from 0.8 to 2.5 GHz with 15 dB, 20 dB, 30 dB and 40 dB coupling configurations. The couplers have a coupling variation of 2.2 dB, insertion loss of 0.1 dB and a directivity of 25 dB. They have a PIM of -163 dBc and can handle up to 500 W of average power and 10 KW peak power. Download Datasheet | Product Details
|
| | |
|
|  | Power Divider & Isolator from Crane Aerospace & Electronics The 1281D4-M01 is a Ku-Band 4 Way Isolator-Divider for Space Applications. The divider operates from 10.7 to 14.8 GHz with a low insertion loss of 1.2 dB, isolation over 38 dB and can handle up to 2 watts of power. The Isolator-Divider combines the functions of high performance power dividers with ferrite isolators to provide a high isolation power divider solution, making the external isolators redundant, for satellite receiver applications, without introducing complex switch-based solutions. Download Datasheet | Product Details
|
| | |
|
|  | PXI Vector Signal Transceiver from National Instruments A vector signal transceiver (VST) is a new class of instrumentation that combines a vector signal generator (VSG) and vector signal analyzer (VSA) with FPGA-based real-time signal processing and control. The Vector signal transceivers from National Instruments also features a user-programmable FPGA, which allows custom algorithms to be implemented directly into the hardware design of the instrument. Download Datasheet | Product Details
|
| | |
|
|  | RF Power Limiter from Peregrine Semiconductor The PE45140 is a power limiter used in high performance limiting applications like tactical and military communications receivers, land mobile radio and a number of other applications between 20 MHz and 2 GHz. The limiter can handle up to 40 dBm (10 Watts) of CW power and 47 dBm (50 Watts) of pulsed power. Unlike traditional PIN diode solutions, this limiter has an adjustable power limiting threshold that eliminates the need for external components like DC blocking capacitors, RF choke inductors and bias resistors. Download Datasheet | Product Details
|
| | |
|
| | RF Power Limiter from Peregrine Semiconductor The PE45450 is a power limiter used in high performance limiting applications like test and measurement equipment, radar, military electronic counter measure receivers and wireless infrastructure transceivers and antennas. The limiter operates from 9 kHz to 6 GHz and can handle up to 40 dBm (10 W) of CW power and 47 dBm (50 W) of pulsed power. Unlike traditional PIN diode solutions, this limiter has an adjustable power limiting threshold that eliminates the need for external components like DC blocking capacitors, RF choke inductors and bias resistors. Download Datasheet | Product Details
|
| | |
|
|  | RF Connector from Santron The pSeries Connectors from San-tron are pressurized coaxial connectors that are able to operate under high pressure conditions and where environment protection is required, such as in agriculture, aviation, and marine applications. They have been ingeniously designed so that they can be machined to extremely tight tolerances and can achieve pressure seals without an O-ring. This series of connecters can be available in multiple connector types and including 2.92 mm, 3.5 mm, SMA, TNC, Type N, 7/16 DIN, and Mini-DIN (4.1/9.5). Download Datasheet | Product Details
|
| | |
|
|  | Between Series Coaxial Adapter from Aeroflex - Inmet The 5706Q is a quick connect 7/16 DIN Male to N Type Female between coaxial adapter that operates from DC to 7.5 GHz. The adapter is matched to 50 ohms and has a VSWR of less than 1.35:1. It has a low PIM of less than -155 dBc and operates from -65 to 85 degrees C. The connectors are white bronze plated brass and mates with MIL-STD-348. Download Datasheet | Product Details
|
| | |
|
|  | In Series Coaxial Adapter from Aeroflex - Inmet The 5030Q is an in series quick connect SMA male to female adapter from DC to 18 GHz. The adapter is matched to 50 ohms and has a VSWR of less than 1.25:1. It has a low PIM of less than -155 dBc and operates from -65 to 85 degrees C. The connectors are white bronze plated brass and mates with MIL-STD-348. Download Datasheet | Product Details
|
| | |
|
|  | Between Series Coaxial Adapter from Aeroflex - Inmet The 5057Q is a quick connect SMA Male to N Type Female between coaxial adapter that operates from DC to 18 GHz. The adapter is matched to 50 ohms and has a VSWR of less than 1.3:1. It has a low PIM of less than -155 dBc and operates from -65 to 85 degrees C. The connectors are white bronze plated brass and mates with MIL-STD-348. Download Datasheet | Product Details
|
| | |
|
|  | Fixed Attenuator from JFW Industries The 50FLP-XXX-100 is a 100 Watt fixed attenuator that operates from 698 to 2700 MHz. It is available in multiple configurations from 5 to 30 dB (5, 6. 10, 20 and 30 dB). The Attenuator can handle up to 100 watts of average power and 1000 watts of peak power. It is available in a module with N Type connectors and an integrated heat sink. Download Datasheet | Product Details
|
| | |
|
|  | LTE Amplifier from RFHIC The HT2626-15M from RFHIC is a 2 stage GaN hybrid power amplifier. It operates at a frequency range from 2610 MHz to 2690 MHz, has a power gain of 27.5 dB to 32.5 dB, with a supply voltage of 28 V and draws 260 mA of current. It provides an average output power of 33 dBm and is ideal for use in RF sub-systems, base stations, repeaters, small cells and LTE systems. This device is available in a surface mount package that measures 20.5 x 15 x 3.5 mm and is matched to 50 Ohms at the input and output. Download Datasheet | Product Details
|
| | |
|
|  | LDMOS Transistor from Freescale The MRFE6VP5150N and MRFE6VP5300N LDMOS power amplifiers are the industry’s first > 65:1 VSWR rated devices to be housed in over molded plastic packaging. They operate at a frequency range from 1.8 and 600 MHz. The MRFE6VP5150 device is capable of handling a load mismatch of > 65:1 VSWR at 50 Vdc, 230 MHz at multiple phase angles; and is capable of 150 Watts CW operation. In addition, both devices incorporate integrated stability enhancements and integrated ESD protection circuitry. Download Datasheet | Product Details
|
| | |
|
|  | Low Noise Amplifier from Skyworks The SKY67153-396LF is a 0.7 to 3.8 GHz low noise amplifier for wireless communication, L band, s band receivers, Cellular repeaters and high temperature applications. It has a noise figure less than 0.7 dB through the band with an IP3 greater than 34 dBm. The amplifier has a flexible bias voltage from 3 to 5 V and consumes between 30 and 100 mA of current. It is available in a compact 2 x 2 mm 8 pin dual flat no lead package. Download Datasheet | Product Details
|
| | |
|
