1. everything RF
  2. RF Newsletters
more
PREV 7th March, 2018 NEXT

New RF & Microwave Products this Week

7 March, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 7 March, 2018
 
Sponsored by DigiKey
 
 
 
New RF & Microwave Products this Week
RF Spectrum Analyzer
Low Cost, High Performance Real Time Spectrum Analyzer from 100 kHz to 20 GHz

RF Spectrum Analyzer from Signal Hound

The SM200A from Signal Hound is a high-performance RF spectrum analyzer and monitoring receiver that operates from 100 kHz to 20 GHz. This realtime analyzer has been designed for fast and accurate data analysis at a low cost possible. It sweeps at 1 THz/sec with a 30 kHz RBW and has 160 MHz of instantaneous bandwidth with a dynamic range of 110 dB. This analyzer has an ultra low phase noise and a GPIO port for antenna switching.
 
Download Datasheet | Product Details
 
Power Sensor
USB/LAN Average Power Sensors from 50 MHz to 8 GHz

Power Sensor from Boonton

The CPS200 from Boonton is a true average power sensor that can measure power for modulated and CW RF signals from 50 MHZ to 8 GHz. It has a 60 dB dynamic range and carry out 100 measurements per second. The sensor can be controlled via a Windows or Linux computer using USB, LAN or PoE.
 
Download Datasheet | Product Details
 
Front End Module
Multimode Multiband Tx-Rx Front-End Module with 3G/4G Power Amplifiers for LTE Applications

Front End Module from Skyworks

The SKY78188-11 from Skyworks is a Multimode Multiband Tx-Rx Front-End Module that supports 2G / 3G / 4G mobile devices. It has separate 3G/4G PA blocks operating at Mid and high bands, a silicon controller containing the MIPI RFFE interface, RF band switches, MB and HB antenna switches, bi-directional couplers, and integrated filters for Bands 1, 2, 3, 7, 34, 39, 40 and 41.
 
Download Datasheet | Product Details
 
Antenna
Lightweight and Rugged 2.4 GHz Patch Antenna for UAV's

Antenna from Taoglas

The Terrablast WTSP.2400.25.4.40 from Taoglas is an Embedded Patch Antenna that operates from 2400 to 2500 MHz. This patch antenna is 30 percent lighter than their ceramic counterparts and extremely resistant to fracture upon impact. It provides a gain of up to 4.9 dBi with an efficiency of over 60%.
 
Download Datasheet | Product Details
 
RF Amplifier
100 Watt Power Amplifier from 700 MHz to 2700 MHz

RF Amplifier from AmpliTech

The AMTHPA-00700270-100W from AmpliTech is a 100 Watt High Gain Power Amplifier that operates from 0.7 to 2.7 GHz. It offers 100 Watts of typical saturated power and a small signal gain of over 50 dB with 1.0 dB Gain flatness. The amplifier requires a 32V DC power supply and has a 30% PAE.
 
Download Datasheet | Product Details
 
RF Switch
9 kHz to 30 GHz Silicon Based SP4T Switch

RF Switch from Analog Devices

The ADRF5045 is a general-purpose, non-reflective SP4T Switch that operates from 9 kHz to 30 GHz. The switch has a low insertion loss of 2.4 dB and provides high port to port isolation of 45 dB from 20 to 30 GHz. It can handle an input power of up to 24 dBm. This broadband switch requires dual supply voltages of +3.3 V and -3.3 V, and provides CMOS/LVTTL compatible control.
 
Download Datasheet | Product Details
 
Sponsored by DigiKey
Analog Devices
Analog Devices Interactive RF Signal Chain
The industry’s broadest portfolio of RF ICs covers the entire RF signal chain from DC to beyond 100 GHz. With over 1000 high performance RF ICs, and a broad range of single chip and module package options, Analog Devices offers a wide variety of RF function blocks and highly integrated solutions. Click here to learn more.
 
 
 
Termination
200 W Flanged Low PIM Termination from DC to 4 GHz

Termination from API Technologies - Inmet

The PPT975-200LP from API Inmet is a low PIM, flanged termination that operates from DC to 4 GHz. It can handle up to 200 W of power, has a resistive tolerance of 5% and a VSWR of under 1.25:1. This termination has been designed to dissipate power in RF circuits when mounted to an appropriate heat sink. It has a PIM level of -120 dBc with two 43 dBm tones.
 
Download Datasheet | Product Details
 
Antenna
8 Port Sector Antenna from 4.9 to 5.9 GHz

Antenna from KP Performance Antennas

The KP-5HVX8-65 from KP Performance Antennas is a 8 port sector antenna that operates from 4.9 to 5.9 GHz. It provides a gain of up to 17.6 dBi and can handle under 50 watts of input power. This antenna has an eight port radiating system within a single 34 inch radome with N-type female connectors. The antenna measures 34 x 11 x 3 inches.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Ultra Low Loss Cable Assemblies up to 110 GHz

RF Cable Assembly from MegaPhase

The Phase3 from MegaPhase are ultra low loss cables that operate up to 110 GHz. These cables are optimized for consistent and repeatable performance where the demand is minimum attenuation, high shielding effectiveness and low VSWR. They can be used to make cable assemblies with 1 mm, 1.85 mm, 2.4 mm, 2.9 mm, 3.5 mm, Type-N, TNC and SMA connectors.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Hand-Flex Coaxial Cables from DC to 40 GHz

RF Cable Assembly from Mini Circuits

The 086 Series of Hand-Flex Coaxial Cables from Mini-Circuits operate from DC to 40 GHz. These cables are ideal for interconnection of coaxial components or sub-systems. The cables have an insertion loss of under 2 dB and return loss of 22 dB at 40 GHz. They can handle up to 61 W of input power and have only 6 mm of bend radius.
 
Download Datasheet | Product Details
 
Cellular Module
LPWA Module for LTE-M / NB-IoT Networks

Cellular Module from Sierra Wireless

The WP7702 from Sierra Wireless is a Low-Power Wide-Area (LPWA) LTE-M / NB-IoT module, which is fully compliant with the 3GPP Release 13 standard. It has an ultra-low power mode that reduces power consumption by 200x for battery or solar powered applications and an optional GNSS receiver that enables tracking and location-based services.
 
Download Datasheet | Product Details
 
RF Module
Embedded Dual Mode Bluetooth 4.2 Low Energy Module

RF Module from Panasonic Corporation

The PAN1026A from Panasonic is a highly integrated Dual Mode Bluetooth 4.2 RF Module with an integrated antenna. This module has a sensitivity of -88 dBm and consumes up to 46 mA of current while operating on a supply from 2.7 to 3.6 V. It is available with an embedded Bluetooth SIG certified stack supporting a Bluetooth Basic Rate SPP profile and extended BLE GATT profiles and services.
 
Download Datasheet | Product Details
 
Sponsored by DigiKey
 
 
 
RF Module
Ultra-Compact Bluetooth 5.0 Low Energy Module

RF Module from TAIYO YUDEN

The EYSHSNZWZ from TAIYO YUDEN is a 2.4 GHz Bluetooth 5 ready module ideal for various small, thin devices including wearable devices, healthcare equipment, smartphone peripherals, and IoT-related devices. It is based on the Nordic nRF52832 SoC and has 512 KB Flash Memory and 64 KB RAM. The module provides an output power of 4 dBm and requires a supply of 1.7 to 3.6 VDC.
 
Download Datasheet | Product Details
 
Dual Directional Coupler
20 dB Dual Directional Coupler from 0.5 to 20 GHz

Dual Directional Coupler from KRYTAR

The 500520020 from Krytar is a Space Qualified dual directional coupler that operates from 0.5 to 20 GHz. It has a coupling value of 20 dB with 1 dB variation over the band. The coupler has a directivity of over 12 dB and an insertion loss of less than 2 dB. It can handle up to 20 watts of average power and has a VSWR of 1.40:1.
 
Download Datasheet | Product Details
 
Block Up Converter
200 W Ku-Band Solid State Block Upconverter

Block Up Converter from Comtech Xicom Technology

The XTSLIN-200K-B1 from Xicomtech is a Solid State Block Up Converter that operates in the Ku-band with an input frequency from 950 MHz to 1700 MHz and an RF frequency from 13.75 to 14.5 GHz. It generates a linear power of over 200 Watts with a small signal gain of up to 70 dB.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Compact Spectrum Analyzer from 9 kHz to 7.5 GHz

RF Spectrum Analyzer from RIGOL Technologies

The DSA875-TG from Rigol is a spectrum analyzer that operates from 9 kHz to 7.5 GHz. The spectrum analyzer that features a widescreen display, compact design, and easy-to-use interface making it ideal for benchtop or field apps in RF and wireless testing and production. The spectrum analyzer offers the ability to measure smaller signals using our digital IF filter, which allows for smaller bandwidth settings and reduces displayed noise levels.
 
Download Datasheet | Product Details
 
Wireless Charging Solution
Digital Controller for Wireless Battery Charger Transmitters

Wireless Charging Solution from STMicroelectronics

The STWBC-WA from STMicroelectronics is a digital controller for wireless battery charger transmitters used for wearables and smart watch applications. This power transmitter is responsible for controlling the transmitting coil and generating the correct amount of power requested by the receiver unit. The receiver unit continuously provides the transmitter the correct power level requested, by modulating the transmitter carrier through controlled resistive or capacitive insertion.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the latest News, White Papers, Product Releases and more. Our searchable product database consists of complete catalogs from over 1,000 manufacturers.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]