1. everything RF
  2. RF Newsletters
more
PREV 4th April, 2018 NEXT

New RF & Microwave Products this Week

4 April, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 4 April, 2018
 
RF & Microwave Community
 
 
 
New RF & Microwave Products this Week
Fixed Attenuator
1 dB Fixed Attenuator from DC to 10 GHz

Fixed Attenuator from Lotus Communication Systems

The ATT10G1D0P1W from Lotus Communication Systems is a 1 dB fixed attenuator that operates from DC to 10 GHz. This thin film attenuator can handle up to 100 mW of CW power and has a VSWR of less than 1.3:1. It is available in a module with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
4 W Solid State Power Amplifier from 2 to 18 GHz

RF Amplifier from AmpliTech

The AMTPA-02001800-4W from Amplitech is a solid state power amplifier that operates from 2 to 18 GHz. It provides an output power of 4 W, gain of more than 29 dB and has a directivity of 35 dB. The amplifier requires a supply voltage of 28 V and consumes up to 1.9 amperes of current. It is available in a module and is ideal for use in radars, mini test instrumentation, electronic warfare and ECM systems.
 
Download Datasheet | Product Details
 
RF Switch
Coaxial SP16T Switch from 0.5 to 43.5 GHz

RF Switch from RF-Lambda

The RFSP16TA5M43G from RF-Lambda is an absorptive coaxial SP16T Switch that operates from 0.5 to 43.5 GHz. It can handle up to 0.5 watts of CW power and has a switching speed of below 70 ns. The switch has an insertion loss of 14 dB and an isolation of over 50 dB. It requires +5V/-5V biasing and is available in a circulator module with SMA - Female input and output connectors.
 
Download Datasheet | Product Details
 
Phase Noise Analyzer
10 MHz to 26 GHz Real-Time Phase Noise Analyzer

Phase Noise Analyzer from Holzworth Instrumentation

The HA7062C from Holzworth is a real time fully integrated phase noise analysis system that operates from 10 MHz to 26 GHz. It utilizes the same core engine from the HA7402C analyzer along with a pair of high performance RF Synthesizers as the test signal LOs. The stability of the agile synthesizers operating as LO sources for the high speed, cross-correlation core enables an extremely reliable phase noise analyzer.
 
Download Datasheet | Product Details
 
RF Mixer
Low LO Drive Surface Mount MMIC IQ Mixer from 5 to 20 GHz

RF Mixer from Marki Microwave

The MMIQ-0520LSM passive GaAs MMIC IQ mixer with low LO drive that operates from 5 to 20 GHz (RF and LO ports) with an IF from DC to 6 GHz. The mixer operates down to an unrivaled +3 dBm LO drive level. It provides up to 40 dB of image rejection and its on-chip LO quadrature hybrid provides excellent phase and amplitude balance.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Environmentally Friendly High-Performance Test & Measurement Cables

RF Cable Assembly from MegaPhase

RF Green is a new series of Environmentally Friendly High Performance Test & Measurement Cables developed by Megaphase. This series of cable assemblies operates at frequencies up to 26.5 GHz with 80% propagation velocity and a time delay of 1.27 ns/ft (4.17 ns/m). They can be used with a wide range of connector interfaces including 2.9mm, 3.5mm, BNC, SMA, TNC and Type N.
 
Download Datasheet | Product Details
 
Trending Content
TCXO vs OCXO
TCXO vs OCXO
The oscillation frequency of a crystal changes as temperature varies. Both TCXOs (Temperature Compensated Crystal Oscillators) and OCXOs (Oven Controlled Crystal Oscillators) are crystal oscillators who oscillation frequency does not vary as much at high temperatures or when the temperature fluctuates. Click here to learn more.
 
 
 
Horn Antenna
1 to 18 GHz Horn Antenna for RFI/EMI Field Testing

Horn Antenna from AR RF/Microwave Instrumentation

The ATH1G18A is a microwave horn antenna that operates from 1 to 18 GHz. It provides an isotropic gain of more than 7 dB and can handle an input power of up to 300 watts. This antenna provides constant high intensity fields necessary for RFI/EMI field testing within and beyond the confines of a shielded room and is designed to perform emissions measurements when calibrated.
 
Download Datasheet | Product Details
 
Waveguide Combiner / Divider
4-Way 180° Waveguide Power Divider from 50 to 75 GHz

Waveguide Combiner / Divider from SAGE Millimeter

The SWP-50375304-15-E1 from Sage Millimeter is a 4 Way 180° Power Divider that operates from 50 to 75 GHz. The power divider has an insertion loss of 1.0 dB at each output port and an isolation of 20 dB. The ports are well balanced and in phase for either power dividing or power combining applications across the full band.
 
Download Datasheet | Product Details
 
RF Module
Low Power Dual Band Wi-Fi and Bluetooth Module

RF Module from Telit Communications

The WE866AC3 is a low power, dual-band (2.4 & 5 GHz), 802.11ac and Bluetooth 4.2 module with an integrated LTE-WiFi coexistence filter. It has a high bandwidth Wi-Fi transceiver (Network Inter-face Card), for Linux, Android & Win-CE powered IoT systems using the advanced 802.11ac MU-MIMO technology. The module is pre-Certified for FCC, IC, CE, Wi-Fi, BT and has a single antenna for Wi-Fi and BT.
 
Download Datasheet | Product Details
 
RF Amplifier
80 W GaN MMIC Power Amplifier from 2.7 to 3.5 GHz

RF Amplifier from Wolfspeed, A Cree Company

The CMPA2735075D from Wolfspeed is a GaN MMIC power amplifier that operates from 2.7 to 3.5 GHz. This transistor provides an output power of 80 Watts with a gain 28 dB and efficiency over 48%. It requires a supply voltage of 28 Volts and has high breakdown voltage. This transistor is available as a bare die that measures 0.197 x 0.174 x 0.004 inches and is ideal for civil and military pulsed radar amplifier applications.
 
Download Datasheet | Product Details
 
Laminate
3.3 Dk Low Loss, Spread Glass Reinforced Laminates

Laminate from Rogers Corporation

The RO4835T laminates from Rogers Corporation are 3.3 Dk, low loss, spread glass reinforced, ceramic filled thermoset materials designed for inner-layer use in multilayer board designs. These laminates have excellent Dk tolerance, and a tight thickness control for outstanding, repeatable wireless performance. They are available in a 2.5 mil, 3 mil and 4 mil core thickness and can be fabricated using standard epoxy/glass (FR-4) processes.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
SMT Programmable Frequency Synthesizer 50 to 6000 MHz

Frequency Synthesizer from EM Research

The SLX Series from EM Research are programmable frequency synthesizers that operate from 50 to 6000 MHz. The synthesizers provide an output power of up to 7 dBm and require an external reference from 5 to 100 MHz. It synthesized signal has a low phase noise with harmonics less than -15 dBc and spurious less than -50 dBc. The syntheziser requires a supply voltage of 3-5 V and draws a current of 65 mA.
 
Download Datasheet | Product Details
 
Upcoming Event
 
 
 
Power Divider
4 Way Multi-Band/Multi-Market Power Divider from 500 MHz to 6 GHz

Power Divider from MECA

The 804-2-3.250WWP is a 4 Way multi band, multi market power divider from MECA. This Wilkinson Power Divider operates from 500 MHz to 6 GHz and can handle up to 30 watts of power.It has an insertion loss up to 2.1 dB, an amplitude balance of 0.6 dB and an isolation of over 21 dB. It is available with SMA connectors in a module that is IP67 rated and suited for indoor and outdoor applications.
 
Download Datasheet | Product Details
 
Directional Coupler
10 dB Directional Coupler from 1500 to 2200 MHz

Directional Coupler from Electro-Photonics LLC

The Q10HK-1900R-SMA from Electro Photonics is a surface mount directional coupler. It operates from 1500 to 2200 MHz with a coupling value of 10 dB, high directivity and an insertion loss of 0.45 dB. It can handle up to 15 watts of power. The coupler can be used in a wide range of applications including signal sampling, signal injection, source leveling, signal isolation, power monitoring, reflection measurement and a number of other applications.
 
Download Datasheet | Product Details
 
RF & Microwave Circulator
Surface Mount Circulator from 9.3 to 9.5 GHz

RF & Microwave Circulator from Renaissance Electronics Corporation

The 3SMH8NW-ROHS from Renaissance Electronics Corporation is a surface mount circulator that operates from 9.3 to 9.5 GHz in the X-band. It provides an isolation of 20 dB and an insertion loss of 0.35 dB. The isolator can handle a power of up to 15 Watts and has a VSWR of 1.25:1. It is available in a surface mount package that measures 0.35 x 0.191 x 0.457 inches and is ideal for radar, SATCOM, wireless and military applications.
 
Download Datasheet | Product Details
 
Wireless SoC
2.4 GHz Multi-Protocol SoC for Ultra Low-Power Wireless Applications

Wireless SoC from Nordic Semiconductor

The nRF52840 is an advanced multi-protocol system-on-chip (SoC) that supports several protocols, including the recently released Bluetooth 5 specification and is ideal for smart home, wearables, and Internet of Things (IoT) applications.The embedded 2.4 GHz transceiver supports Bluetooth low energy (Bluetooth 5), 802.15.4, ANT and proprietary 2.4 GHz protocols.
 
Download Datasheet | Product Details
 
RF Module
Wi-Fi + Bluetooth Low Energy MCU Module for IoT Applications

RF Module from Espressif Systems

The ESP32-WROOM-32D from Espressif Systems is a Wi-Fi+BT+BLE MCU module that supports a variety of applications such as low-power sensor networks, voice encoding, music streaming and MP3 decoding. The module has an integrated 2.4 GHz Wi-Fi and Bluetooth chip. It supports a data rate of up to 150 Mbps and has a sleep current of under 5 micro amps, making it suitable for battery powered and wearable electronics applications.
 
Download Datasheet | Product Details
 
RF Amplifier
851 to 869 MHz / 806 to 824 MHz Bi-Directional Amplifier

RF Amplifier from Comprod

The BDA 806870 from Comprod is a Bi-Directional Amplifier with a downlink frequency of 851 to 869 MHz and uplink frequency of 806 to 824 MHz. It provides an output power of 31.5 dBm and a gain of 80 dB with a noise figure of 2.5 dB. This FCC and IC certified BDA is designed and engineered to meet the fire protection codes (NFPA and IFC standards). It is available in a rack mount enclosure or in a NEMA 4/4x waterproof, stainless steel enclosure that measures 17.5 x 11 x 9 inches.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide users with the latest product releases, news stories, information about upcoming events and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]