PREV 30th May, 2018 NEXT

Latest RF & Microwave Products this Week

30 May, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 30 May, 2018
 
Sponsored by Signal Hound
 
 
 
New RF & Microwave Products this Week
RF Transistor
Fully-Matched GaN on SiC RF Power Transistor from 5 to 6 GHz

RF Transistor from Integra Technologies, Inc.

The IGT5259CW25 from Integra Technologies is a fully-matched RF GaN on SiC power transistor that operates from 5 to 6 GHz. The transistor provides up to 25 watts of power and with a gain of 12 dB and efficiency of 48% at CW conditions. It requires a 36 V drain bias voltage and requires a negative gate voltage and bias sequencing. It can be used in C-Band radars and for general purpose CW applications.
 
Download Datasheet | Product Details
 
Front End Module
10.5 to 16 GHz Silicon Tx/Rx IC for RADAR, SATCOM Applications

Front End Module from Anokiwave

The AWMF-0141 from Anokiwave is a Ku-Band Silicon Core IC for active steerable antenna arrays (AESA) that operate from 10.5 to 16 GHz. It has an integrated PA, LNA, 6-bit gain and phase control and a T/R switch. The IC provides 24 dB of transmit channel gain with a P1dB of 13.5 dBm and a receive channel gain of 30 dB with noise figure of 1.5 dB.
 
Download Datasheet | Product Details
 
RF Switch
DC to 7 GHz SPDT Non-Reflective Switch

RF Switch from Aelius Semiconductors

The ASL 8011P4 from Aelius Semiconductors is a terminated SPDT MMIC switch that operates from DC to 7 GHz. The switch has a high isolation and low insertion loss through the band. It can handle up to 23 dBm of power (P1dB), requires a +5V/-5V power supply and can be controlled using TTL compatible voltage levels.
 
Download Datasheet | Product Details
 
RF Amplifier
1 to 20 GHz Solid State Power Amplifier

RF Amplifier from Exodus Advanced Communications

The AMP2120 is a solid state power amplifier that operates from 1 to 20 GHz. It provides an output power of more than 20 watts with a gain of over 43 dB. This rack mount amplifier can be controlled via the front panel on the amplifier system. It is available in a rack mount unit that measures 430 x 133 x 562 mm with SMA female connectors and weighs 20 kg.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
250 kHz to 20 GHz Multi-Channel Frequency Synthesizers

Frequency Synthesizer from Holzworth Instrumentation

The HS9000 Series from Holzworth are Multi-Channel Frequency Synthesizers that operate from 250 kHz to 20 GHz. This is a unique platform that allows users to specify custom configurations for a COTS product. Units can be fitted with anywhere from 1 to 8 channels with the ability to specify each channel&rsquos frequency limits and performance options. The frequency synthesizer has excellent phase coherence between the independently controlled channels.
 
Download Datasheet | Product Details
 
RF Amplifier
50 Watt L-Band Solid State Power Amplifier

RF Amplifier from NuWaves Engineering

The NW-PA-13G05A is a GaN solid state power amplifier that operates from 800 to 2000 MHz. It has an output saturated power of 35 W, with a gain of 40 dB and efficiency greater than 40%. The Power Amplifier is available in an aluminum chassis which provides improved heat dissipation characteristics for higher-temperature operation.
 
Download Datasheet | Product Details
 
Sponsored by Signal Hound
Signal Hound
Affordable SNA’s backed by Signal Hound support + 2 year warranty
Signal Hound offers highly-capable and affordable SNA product combinations that measure insertion loss, return loss, and have the spectrum analyzer features you need. We include an API so that your equipment can do double duty—possibly as automated test equipment—when the need arises. Check out combo options and discounted pricing!
 
 
 
Termination
1 W Coaxial Termination from DC to 65 GHz

Termination from Mini Circuits

The ANNE-50E+ from Mini-Circuits is a Coaxial Termination that operates from DC to 65 GHz. It can handle up to 1 watt of power. The termination measures 0.69 inches (length) x 0.36 inches (diameter) and is ideal for 5G, defense, aerospace, test labs, test and measurement applications. This model has a 1.85 mm-male connector which is mechanically compatible with 2.4 mm-female and V female connectors as well.
 
Download Datasheet | Product Details
 
RF Amplifier
27 to 31 GHz GaN Solid State Power Amplifier

RF Amplifier from Aethercomm

The SSPA 27.0-31.0-20 from Aethercomm is a GaN solid state power amplifier that operates from 27 to 31 GHz. It provides a power gain of more than 43 dB and an output power of 20 W while operating on a 28 Vdc power supply. This SSPA can be turned on and off in less than 10.0 uSec. It is available in a module that measures 4 x 5 x 2 inches with SMA female connector at the input port and WR-28 waveguide at the output port.
 
Download Datasheet | Product Details
 
RF Amplifier
10 Watt High Power Amplifier Module (SSPA) from 6 to 18 GHz

RF Amplifier from KeyLink Microwave

The KB60180M40A from KeyLink Microwave is a multi-octave high power amplifier that operates from 6 to 18 GHz. This GaN amplifier provides a saturated output power of 10 Watts with a gain of 40 dB. It is available in a module that measures 150 x 90 x 25 mm with SMA female connectors and is ideal for for jamming, EMC, test and measurement applications.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure for Applications up to 6 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-1560-A from RF Electronics is a RF Shielded Test Enclosure that can be used to test devices operating up to 6 GHz. It has a thick RF absorbing foam that provides a reflection loss of over 18 dB at 2.4 GHz. The test enclosure has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
RF Amplifier
75 to 110 GHz Benchtop Driver Amplifier

RF Amplifier from SAGE Millimeter

The STB-7531142515-1010-S1 from SAGE Millimeter is a benchtop driver amplifier that operates from 75 to 110 GHz. It provides a signal gain of 25 dB, P1dB of 15 dBm and saturated output power of 18 dBm across the whole band. The amplifier requires a single phase AC voltage, which can be supplied by a regular wall socket.
 
Download Datasheet | Product Details
 
In Series RF Adapter
Mitered 2.92 mm plug to 2.92 mm jack 40 GHz In-Series Adapter

In Series RF Adapter from Jyebao

The ALS-K3K8-1.15 from Jyebao is a Mitered 2.92mm plug to 2.92mm jack adapter that operates at frequencies up to 40 GHz. This right-angle in-series adapter has been made out of passivated stainless steel. It is matched to 50 ohms and has a VSWR of 1.15:1.
 
Download Datasheet | Product Details
 
Sponsored by Signal Hound
 
 
 
RF Transceiver
34 MHz Multi-Channel Transceiver for Industrial Control Applications

RF Transceiver from Circuit Design

The STD-302Z is a 434 MHz Narrow Band Multi-Channel Transceiver module suitable for feedback systems, industrial remote control and telemetry applications. It provides up to 10 mW of RF power from its PLL-synthesized transmitter with programmable RF channels and has a receiver sensitivity of down to -119 dBm.
 
Download Datasheet | Product Details
 
Block Up Converter
3 Watt Compact Ku-Band Block Up Converter from 13.75 to 14.75 GHz

Block Up Converter from Actox

The ABA3GKX from Actox is a 3 Watt extended Mini Full Ku-Band Block Up Converter that operates from 13.75 to 14.75 GHz. This BUC has been developed using GaN technology to enable high efficiency, low energy consumption and high reliability. It has an LO frequency of 12.8 GHz and an IF frequency from 950 MHz to 1950 MHz.
 
Download Datasheet | Product Details
 
Antenna
Directional In-building Antenna from 698–960 MHz and 1710–2700 MHz

Antenna from CommScope

The CELLMAX-D-43i is a Directional In-building Antenna that operates from 698–960 MHz and 1710–2700 MHz. It has a horizontal beamwidth that varies from 54 to 128 degrees and vertical beamwidth that varies from 38 to 85 degrees. This vertically polarized antenna has a low PIM, VSWR and can handle up to 50 watts of input power.
 
Download Datasheet | Product Details
 
RF Repeaters
5 Watt Digital Repeater for 700/800 MHz Public Safety Bands

RF Repeaters from Advanced RF Technologies

The PSR-78-9537 from ADRF Tech is a Channelized 5 Watt Digital Repeater designed for use in the 700 and 800 MHz bands which have been designated for use to firefighters and the police. The repeater has software defined filtering with up to 32 non-contiguous narrowband channels that can be controlled through ADRF's web or mobile GUI, as well as alarming outputs to supervised circuits for antenna, amplifier, power supply, battery, and charger failures.
 
Download Datasheet | Product Details
 
PIM Analyzer
Battery Operated Portable Multi-Band PIM Analyzer

PIM Analyzer from Kaelus

The iTA Series of PIM analyzer from Kaelus are battery operated versatile PIM Test Analyzers that can be used in a number of test scenarios such as testing at the top of the tower, base of the tower, on the roof top and in-building for DAS systems. These IEC compliant 20 Watt, rugged testers include a tablet computer in a ruggedized case for remote control.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is the largest database of RF & Microwave products. We list over 200,000 products from more than 1000 manufacturers in 200 categories and enable engineers to search for them using our customized parametric search tool.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]