1. everything RF
  2. RF Newsletters
more
PREV 6th June, 2018 NEXT

New RF & Microwave Products this Week

6 June, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 6 June, 2018
 
Sponsored by Pasternack
 
 
 
New RF & Microwave Products this Week
RF Amplifier
Silicon on Insulator Low Noise Amplifier from 3400 to 3800 MHz

RF Amplifier from Skyworks

The SKY65806-636LF from Skyworks is a silicon-on-insulator (SOI) low noise amplifier that operates from 3400 to 3800 MHz with an in-built bypass function. The LNA provides a gain of 13.5 dB with a noise figure of less than 1.2 while operating of a supply voltage of 1.6 to 3.3 V. It is matched to 50 ohms and is available in a compact DFN package that measures 1.1 x 0.7 mm.
 
Download Datasheet | Product Details
 
RF Amplifier
X-Band GaAs MMIC Low Noise Amplifier Die

RF Amplifier from VIPER RF

The VRFA0026-BD from Viper RF is a X-Band GaAs MMIC Low Noise Amplifier that operates from 8 to 11 GHz. The amplifier can provide a gain of 23 dB with a noise figure of 1 dB. It requires a 3 V supply and draws 80 mA of current. The RF ports of the LNA are DC blocked and matched to 50 ohms.
 
Download Datasheet | Product Details
 
RF Amplifier
27 to 33 GHz, 4 Watt MMIC Power Amplifier Die

RF Amplifier from MwT Microwave

The MMA-273336 from Microwave Technology is a MMIC Power Amplifier that operates from 27 to 33 GHz. This amplifier provides 4 watts of output power (P1dB) and a gain of 22 dB. It requires a 6 V supply and draws between 1.5 to 2.8 A of current. This PA is matched to 50 ohms at the RF ports and is ideal for P2P Radios and V-Sat applications.
 
Download Datasheet | Product Details
 
RF Switch
SP4T SOI Switch from 5 to 2000 MHz

RF Switch from Qorvo

The QPC6742 is a 75 Ohm Silicon on Insulator (SOI) SP4T switch designed for use in CATV, satellite set top, and other high-performance communications systems. It has an insertion loss of 0.35 dB, an isolation of 34 dB and an IP3 of 82 dBm at 850 MHz. The switch has a control voltage of 1.8 V and requires a 3-5 V supply.
 
Download Datasheet | Product Details
 
90 Degree Hybrid Coupler
9 to 20 GHz MMIC Quadrature Hybrid Coupler

90 Degree Hybrid Coupler from Marki Microwave

The MQH-0920 from Marki Microwave is a 90 degree Quadrature Hybrid Coupler that operates from 9 to 20 GHz. The hybrid coupler has an amplitude balance of 0.55 dB and phase balance of +/- 2 degrees. It has been developed using Passive GaAs MMIC technology and is available as a wire bondable chip.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
Single Channel RF Synthesizers from 250 kHz to 6.4 GHz

Frequency Synthesizer from Holzworth Instrumentation

The HSM Series from Holzworth Instrumentation is a range of RF synthesizer modules that operate from 250 kHz to 6.4 GHz. They are microwave CW sources that are architected on a non-PLL based platform. The digital-analog hybrid design provides excellent phase noise performance and spurious response, which compliment the phase coherent nature of these digital-analog hybrid signal sources.
 
Download Datasheet | Product Details
 
Sponsored by Pasternack
RF, Microwave and Millimeter Wave Products
Over 45,000 RF, Microwave and Millimeter Wave Products Ship Same-Day
Pasternack supplies a very wide selection of over 45,000 quality RF, microwave and millimeter wave components from inventory or cable assembly builds. Products, including built-to-order custom cable assemblies (over 250,000 configurations possible), will ship the same-day. Click here to learn more.
 
 
 
RF Amplifier
Ku-Band Waveguide Low Noise SATCOM Amplifier

RF Amplifier from AmpliTech

The APTW6-10701275-75K10-WR75-D6 from AmpliTech is a high gain, low noise SATCOM amplifier that operates from 10.7 to 12.75 GHz. It delivers a gain of more than 60 dB with a noise figure of 0.88 dB and an output power of 15 dBm. This amplifier is pressurizable to 5 psi and has an inbuilt reverse voltage protection.
 
Download Datasheet | Product Details
 
RF Cable Assembly
120 GHz Coaxial Cable with Enhanced 1.0 mm Connector

RF Cable Assembly from Junkosha

The MWX002 from Junkosha is a 110 GHz cable that can be used up to 120 GHz when used with the optional Enhanced 1.0 mm connector. The cable is matched to 50 ohms has a propagation delay of 4.2 ns, has a wavelength reduction rate of 79% and a VSWR of 1.197:1 with a loss of 14.5 dB/meter at 120 GHz.
 
Download Datasheet | Product Details
 
RF Switch
DC to 6 GHz SP8T Switch Handles up to 2 Watts

RF Switch from Renaissance Electronics Corporation

The 17A6BB-8S from Renaissance is a SP8T switch that operates from 400 Mhz to 6 GHz. The switch has an insertion loss of under 3 dB with an isolation on over 25 dB and can handle a P1dB of up to 35 dBm. It has a switching speed of under 150 ns and has TTL control. The switch requires a supply voltage of 5 V and draws 15 mA of current. It is available in a module with SMA connectors.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Low Cost, Software-Upgradeable Spectrum Analyzer from 5 kHz to 3 GHz

RF Spectrum Analyzer from Rohde & Schwarz

The FPC1500 from Rohde & Schwarz is a software-upgradeable spectrum analyzer that operates from 5 kHz to 1 GHz, which can be expanded to 2 GHz or 3 GHz via software upgrades (keycode upgrade concept). The device provides a low noise floor level of -150 dBm, which can be further extended to -165 dBm with an optional, keycode-activated preamplifier.
 
Download Datasheet | Product Details
 
Front End Module
26 GHz Quad Core Silicon IC for 5G Phased Array Applications

Front End Module from Anokiwave

The AWMF-0139 from Anokiwave is a highly integrated silicon quad core IC for 5G phased array applications. The chipset has been developed for the 26 GHz 5G band and operates from 24.25 to 27.5 GHz. It provides a gain of 25 dB and an adjustable output power of up to 14 dBm during transmit mode and a gain of 32 dB with a noise figure of 6.5 dB during receive mode.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
Microwave Wideband Synthesizer with Integrated VCO

Frequency Synthesizer from Analog Devices

The ADF4371 from ADI is a frequency synthesizer consisting of a phase-locked loop (PLL) with a fully integrated voltage controlled oscillator (VCO) as well as integrated low dropout regulators (LDOs) and integrated tracking filter technology. It is available in a 7 mm x 7 mm 48 Lead LGA Package.
 
Download Datasheet | Product Details
 
Sponsored by Pasternack
 
 
 
Antenna
Compact Surface Mount Tri-Band Antenna from 900 to 5850 MHz

Antenna from MOLEX

The 2019320001 from MOLEX is a compact surface mount antenna that can be used for Wi-Fi, Cellular and ISM band applications. This omni-directional antenna has linear polarization and has been optimized for 900 to 924 MHz, 2400 to 2500 MHz and the 5150 to 5850 MHz band. It provides a gain of up to 4.5 dB with an efficiency of up to 65%.
 
Download Datasheet | Product Details
 
Wireless SoC
Small, Low Power Bluetooth 5 SoC with integrated Flash

Wireless SoC from Dialog Semiconductor

The SmartBond DA14586 from Dialog Semiconductor is a low power Bluetooth 5.0 SoC with integrated flash. This small, low power Bluetooth solution is ideal for adding Bluetooth low energy functionality to products like remote controls, proximity tags, beacons, connected medical devices and smart home nodes.
 
Download Datasheet | Product Details
 
Antenna
Chip Antenna for Wi-Fi, Bluetooth and GPS Applications

Antenna from TDK

The ANT161575TT-3000A1 from TDK is a chip antenna for Wi-Fi, Bluetooth and GPS applications. It has been optimized for the frequency bands from 1574 to 1577 MHz, 2400 to 2484 MHz and 5150 to 5850 MHz. The antenna measures 1.6 (L) mm x 0.8 (W) mm x 0.4 (H) mm.
 
Download Datasheet | Product Details
 
Wireless Charging Solution
WPC 1.2.4 Compliant Wireless Charging Receiver IC

Wireless Charging Solution from ON Semiconductor

The NCP6401 from ON Semiconductors is a single chip Wireless Charging receiver, which is compliant with Qi standards. It consists of an industrial standardized Cortex-M0+ processor with flash memory to support proprietary protocols and robust interactions with variant Tx wireless power systems at high system level efficiency.
 
Download Datasheet | Product Details
 
Antenna
Off-the-shelf Embedded WiFi Antenna for 2.4 GHz & 5 GHz Bands

Antenna from Mobile Mark

EM-2400/5500 from Mobile Mark is an embedded antenna for WiFi boards. It is an off-the-shelf antenna designed to be integrated in to OEM designs. It operates in both WiFi bands - 2.4 to 2.5 GHz & 4.9 to 6.0 GHz with a gain of 2 dBi and VSWR of 2.5:1 over all bands. This compact antenna measures 1.42 x 0.475 inches and has a 6 inch RG-174 cable with an SMA connector.
 
Download Datasheet | Product Details
 
RF Module
802.11p V2X and Wi-Fi Chip for Active Traffic Safety

RF Module from u-blox AG

The UBX-P3 from u-blox is a DSRC/802.11p V2X and Wi-Fi chip developed for vehicle-to-everything (V2X) wireless communication. The UBX-P3 communicates via the IEEE 802.11p wireless standard, referred to as Dedicated Short Range Communications (DSRC) in the US. The DSRC/802.11p technology is mature and available for immediate deployment of V2X systems.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the most comprehensive industry news coverage, white papers, information about upcoming events and new product releases.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]