1. everything RF
  2. RF Newsletters
more
PREV 8th Aug, 2018 NEXT

New RF & Microwave Products this Week

8 Aug, 2018 - everything RF Newsletter
 
everything RF
Date: 8 Aug, 2018
 
Sponsored by Signal Hound
 
 
 
New RF & Microwave Products this Week
RF Spectrum Analyzer
Portable Real Time Spectrum Analyzer from 9 kHz to 13.6 GHz

RF Spectrum Analyzer from Tektronix, Inc.

The RSA513A from Tektronix is a Real-time Spectrum Analyzer that operates from 9 kHz to 13.6 GHz. It has a real time bandwidth of 40 MHz. The RSA513A was built to bring real-time spectrum analysis to solving the problems of spectrum managers, interference hunters and network maintenance personnel who need to track down hard to find interferers, maintain RF networks and keep records of their efforts.
 
Download Datasheet | Product Details
 
RF Mixer
Image-Reject Mixer from 11 to 15 GHz

RF Mixer from Polyphase Microwave

The IRM110150B from Polyphase Microwave is an Image-Reject mixer with a RF/LO frequency from 11 to 15 GHz and IF frequency from 10 to 90 MHz. It achieves up to 30 dB of image rejection and delivers a high LO-RF isolation of 55 dB. The mixer is available in a module that measures 1.35 x 2 inches with SMA female connectors and is ideal for high-performance microwave down converters and receivers.
 
Download Datasheet | Product Details
 
RF Transistor
400 W GaN on SiC HEMT from 960 to 1215 MHz

RF Transistor from Wolfspeed, A Cree Company

The GTVA104001FA-V1 from Wolfspeed is a GaN on SiC High Electron Mobility Transistor that operates from 960 to 1215 MHz. It provides an output power of 400 W and a gain of 19 dB while operating from 50 V supply. This Pulsed CW device has a pulse width 128 µs and duty cycle of 10%. It is available in a thermally-enhanced surface mount package with earless flange.
 
Download Datasheet | Product Details
 
OCXO
10 to 40 MHz Extended Temperature OCXOs

OCXO from MtronPTI

The XO517X series from Mtron PTI are Extended Temperature OCXOs with an oscillation frequency from 10 to 40 MHz. The OCXOs have a phase noise of -137 dBc/Hz at 10 Hz and a stability of ±1 ppb over a temperature range of -40 to 90°C. These oscillators require a start-up power of 6 watts and consume a steady state power of 2.5 watts from a 12 VDC supply.
 
Download Datasheet | Product Details
 
OCXO
5 to 100 MHz Oven Controlled Crystal Oscillator

OCXO from IQD Frequency Products

The IQOV-164 from IQD is an Oven controlled crystal oscillator (OCXO) that operates from 5 to 100 MHz. The OCXO operates over a temperature range from -40 to 85 degrees Celcius with ±0.20 to ±50 ppb frequency stability. It requires a supply voltage of 3.3 V and provides an HCMOS or sinewave output.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
7-bit RF Digital Step Attenuator from 9 kHz to 4 GHz

RF Variable Attenuator from pSemi

The PE43670 from pSemi is a high linearity, 7-bit RF Digital Step Attenuator (DSA) that operates from 9 kHz to 4 GHz. It has an attenuation range of 31.75 dB with 0.25 dB steps. The attenuator has a parallel or serial-addressable CMOS control interface. It maintains high attenuation accuracy over frequency and temperature and has very low insertion loss of under 2.4 dB.
 
Download Datasheet | Product Details
 
Sponsored by Signal Hound
RF Spectrum Analyzer from Signal Hound
READY TO SHIP – 20 GHz Headless RF Spectrum Analyzer from Signal Hound
Our SM200A is an affordable, compact & capable spectrum analyzer for a range of applications. Tuning from 100 kHz to 20 GHz, the analyzer has an instantaneous bandwidth of 160 MHz and a high dynamic range of 110 dB. A sustained sweep speed of 1 THz/s and ultra-low phase noise means the SM200A introduces only 0.1% error to EVM measurements. Unrivaled value at $11,900. Click here to learn more.
 
 
 
RF Amplifier
0.1 to 18 GHz Low Noise Cryogenic Amplifier

RF Amplifier from AmpliTech

The APTC4-00101800-2510-D4-T from Amplitech is a low noise cryogenic amplifier that operates from 0.1 to 18 GHz. This amplifier has a gain of 23 dB, flatness of 2.5 dB and a noise figure of less than 2.5 dB. It can provide an output power of 10 dBm. The amplifier is available in a module with SMA connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
50 W Power Amplifier from 1.7 to 2.4 GHz

RF Amplifier from Triad RF Systems

The TA1017 from TraidRF is a class AB GaN power amplifier module that operates from 1700 MHz to 2400 MHz. It provides a saturated output power of 47 dBm and a gain of 27 dB while operating from a 12 V supply. This L-S Band Power Amplifier has been designed for both military and commercial applications.
 
Download Datasheet | Product Details
 
RF Amplifier
Ultra Low Phase Noise RF Amplifier from 8 to 4000 MHz

RF Amplifier from Holzworth Instrumentation

The HX2400 from Holzworth is an ultra-low phase noise RF amplifier that operates from 8 MHz to 4000 MHz. It provides an output power of 18 dBm with a gain of 14 dB @ 1 GHz and has a phase noise of -172 dBc/Hz at 10 kHz offset. The amplifier can be powered from bench top power supplies, a standard AC/DC adapter (available separately) or via a 6 VDC to 12VDC battery.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Low Loss, Flexible Jumper Cables from DC to 40 GHz

RF Cable Assembly from MegaPhase

The A06 from MegaPhase are low loss, flexible jumper cables that operate up to 40 GHz. The cables provide excellent flexibility and are constructed using a low density dielectric protected by a flat metalized braid. These cables are ideal for automatic test equipment bays, jumpers and switch boxes. Many standardized connectors are available for interconnect solutions.
 
Download Datasheet | Product Details
 
GNSS Module
Compact GNSS Standalone Module

GNSS Module from STMicroelectronics

The Teseo-LIV3F from STMicroelectronics is a tiny GNSS standalone module that simultaneously supports multiple constellations (GPS/Galileo/Glonass/BeiDou/QZSS). It has an embedded TeseoIII single die standalone positioning receiver IC, an on board 26 MHz Temperature Compensated Crystal Oscillator (TCXO) and a 32 KHz Real Time Clock (RTC) oscillator.
 
Download Datasheet | Product Details
 
Wireless SoC
Bluetooth 5-Compliant Stereo Audio System-on-Chip (SoC)

Wireless SoC from Microchip Technology

The IS2064 from Microchip Technology is a fully-certified, Bluetooth 5-compliant Stereo Audio System-on-Chip (SoC), with Sony’s LDAC audio codec technology. It transmits up to 990 kbps data throughput, which is three times higher than the standard Bluetooth Sub-band Codec (SBC) and maintains frequency and bit depth of up to 96 kHz/24-bit.
 
Download Datasheet | Product Details
 
Sponsored by Signal Hound
 
 
 
Switch Matrix
2 x 10 Switch Matrix from DC to 18 GHz

Switch Matrix from Mini Circuits

The ZTVX-10-18-S from Mini-Circuits is a flexible, bi-directional 2 x 10 switch matrix that operates from DC to 18 GHz. This switch matrix can be programmed to connect the 2 Input Ports to any 2 of the 10 output ports (and vice versa). It may be used together with a 2-port VNA in a wide range of multi-port or multi-device test scenarios like parallel testing of multiple 2 port devices, production testing of multi-port devices and testing of multi-channel MIMO systems.
 
Download Datasheet | Product Details
 
Power Divider
2-Way Resistive Power Divider from DC to 18 GHz

Power Divider from MECA

The 802-3-9.000 from MECA is a 2-way resistive power divider that operates from DC to 18 GHz covering all bands from VHS thru X and the Ku band. It can handle up to 1 watt of power, has an insertion loss of under 7.5 dB and a VSWR of 1.30:1. The power divider is available in a module with 2.92mm connectors.
 
Download Datasheet | Product Details
 
Power Divider
6-Way Power Divider from 6 to 18 GHz

Power Divider from Response Microwave Inc

The RMPD6.6000-18000Sf from Response Microwave is a 6-way power divider that operates from 6 to 18 GHz. It has an insertion loss of under 1.6 dB, isolation of over 16 dB and amplitude unbalance of 0.8 dB. The power divider can handle an input power of up to 30 watts of power and has a VSWR of below 1.70:1.
 
Product Details
 
RF Amplifier
250 W Power Amplifier from 100 kHz to 1000 MHz

RF Amplifier from AR RF/Microwave Instrumentation

The 250U1000 from AR RF/Microwave Instrumentation is a solid-state, self-contained, air-cooled CW Amplifier that operates from 100 kHz to 1000 MHz. This broadband amplifier is ideal for applications where instantaneous bandwidth, high gain and linearity are required. The amplifier is available in a benchtop cabinet or rack mount module with front panel control options.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with new RF/Microwave product releases. Our weekly newsletter consists of new products from the leading RF & Microwave Companies.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]