1. everything RF
  2. RF Newsletters
more
PREV 29th Aug, 2018 NEXT

New RF & Microwave Products this Week

29 Aug, 2018 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 29 Aug, 2018
 
Sponsored by Mouser
 
 
 
New RF and Microwave Products this Week
RF Variable Attenuator
Solid State USB Programmable Attenuator from 0.2 to 6 GHz

RF Variable Attenuator from JFW Industries

The 50P-2013 from JFW Industries is a solid state programmable attenuator that operates from 200 MHz to 6 GHz. It has an attenuation range of 0 to 63 dB dB with 1 dB steps. The attenuator has a fast switching speed of 1 micro second and can handle an input power of up to 27 dBm (33 dBm no damage). It is available in a module with SMA female connectors and a USB port for power/control.
 
Download Datasheet | Product Details
 
90 Degree Hybrid Coupler
90° Hybrid Coupler 2 to 18 GHz

90 Degree Hybrid Coupler from Marki Microwave

The MQS-0218 from Marki Microwave is a 90 degree hybrid coupler that operates from 2 to 18 GHz. This 3 dB coupler has an isolation of 17 dB, amplitude balance of +/- 2 dB and phase balance of +/- 3 degrees. It has been developed using Passive GaAs MMIC technology and is available as a wire bondable chip or connectorized module.
 
Download Datasheet | Product Details
 
GNSS Module
Multi-Channel GPS Module with Integrated Antenna

GNSS Module from OriginGPS

The ORG1410 from OriginGPS is an ultra-low profile and ultra-low weight multi-channel GPS module with integrated antenna. It also supports SBAS, QZSS and other regional overlay systems to continuously track all satellites in view, providing real-time positioning data in standard NMEA format.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
4-Port Vector Network Analyzer from 100 kHz to 9 GHz

Vector Network Analyzer from Copper Mountain Technologies

The C2409 from Copper Mountain Technologies is a 4-port modular vector network analyzer that operates from 100 kHz to 9 GHz. The VNA can measure all S parameters S11, S12, S21, S22, S44 and can be controlled using any Windows PC or laptop. It has a dynamic range of up to 162 dB (1Hz IF BW), directivity of 46 dB and sweep speeds of as low as 10 microseconds per point.
 
Download Datasheet | Product Details
 
RF Transistor
600 W LDMOS Power Transistor from 616 to 960 MHz

RF Transistor from Ampleon

The BLC9H10XS-600A from Ampleon is a LDMOS asymmetric Doherty power transistor that operates from 616 to 960 MHz. It delivers an output power of up to 600 watts with high efficiency and has excellent thermal stability. This device has integrated ESD protection. It is available in a plastic earless flanged cavity package and is ideal for base stations and multi carrier applications.
 
Download Datasheet | Product Details
 
RF & Microwave Isolator
25 W, Low Loss 0.50" Coaxial Isolator from 6 to 40 GHz

RF & Microwave Isolator from VidaRF

The VCI Series of Isolators from VidaRF are 0.5 in. coaxial isolators that are available in frequency configurations from 6 to 40 GHz. The isolators have a low insertion loss and isolation of over 17 dB. They can handle 25 W of forward power and 1 Watt of reverse power. This series of coaxial isolators are available with N Type, SMA and K Type connectors.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Amphenol RF HD-EFI Series
Mouser Supplying Crash-Proof, Board-to-Board Connectors for Blind Mating Applications.
Amphenol RF HD-EFI Series 50O micro-miniature products are ideal for blind-mate applications and mating multiple RF lines between printed circuit boards. These connectors are designed specifically to maximize radial and axial float. Its gathering cone and bullet design allow for 1.4mm of axial and radial float with a maximum 5° float angle. Click here to learn more.
 
 
 
RF Amplifier
Solid State High Power Amplifier from 6 to 18 GHz

RF Amplifier from Exodus Advanced Communications

The AMP1122BH from Exodus Advanced Communications is a solid state power amplifier that operates from 6 to 18 GHz. This amplifier has been developed using linear hybrid GaAs and GaN design. It delivers a gain of more than 50 dB with an output power of 100 watts and has a return loss of over 10 dB. The amplifier requires a supply voltage of 32 V DC and consumes up to 35 A of current.
 
Download Datasheet | Product Details
 
RF Amplifier
60/20 W CW Power Amplifier from 0.7 to 18 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 60/20S1G18A from AR RF/Microwave Instrumentation is a portable, self-contained, air-cooled, dual-band solid state power amplifier that operates from 0.7 to 18 GHz. It provides an output power of 60/20 watts CW. This amplifier has been developed for applications where high gain and linearity are required.
 
Download Datasheet | Product Details
 
RF Amplifier
80 W GaN Based Rack Mount Amplifier from 2 to 6 GHz

RF Amplifier from KeyLink Microwave

The KB2060S49A from Keylink Microwave is a rack-mountable amplifier that operates from 2 to 6 GHz. This GaN based amplifier subsystem provides excellent power density, high efficiency, low distortion and wide dynamic range. It provides an output power of 80 watts with a gain of 49 dB. The gain of the amplifier can be controlled from the front panel of the device.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-3170 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that attenuates standing waves and reflections, providing an isolation of more than 120 dB @ 3 GHz. The enclosure has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
Front End Module
Switch + LNA Module for 5G MIMO Base Station Applications

Front End Module from pSemi

The PE53210 from pSemi is a Switch + LNA module that operates from 3.3 to 3.8 GHz (bands 42, 43, n78). This dual-channel configuration receiver module integrates two-channel LNA with bypass function and high-power switch. The low power consuming module delivers a low noise figure of 1.65 dB and has a OIP3 of 29 dBm.
 
Download Datasheet | Product Details
 
Termination
250 W AIN Flanged Chip Termination from 4.8 to 15 GHz

Termination from Barry Industries

The TA50R0-250-31X from Barry Industries is an AIN flanged chip termination that operates from 4.8 to 15 GHz. It can handle up to 250 watts of power while operating over a temperature range of -55 to 150 degree Celsius. The chip is available with a standard impedance value of 50 ohms.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
 
 
 
RF Switch
USB Programmable SPDT RF Switch from 0.01 to 6 GHz

RF Switch from Vaunix

The LSW-602PDT from Vaunix is a USB programmable SPDT Switch that operates from 0.01 to 6 GHz. It has an insertion loss of 3.5 dB and an isolation of over 55 dB. This 50 Ohm non-reflective switch can handle an input power of up to 10 W and has a switching speed of under 300 ns.
 
Download Datasheet | Product Details
 
Front End Module
High Power Switch LNA Module from 1.850 to 2.025 GHz

Front End Module from Qorvo

The QPB9320 from Qorvo is a front end module developed for TDD macro or picocell base stations that operate from 1.850 to 2.025 GHz. This FEM integrates RF functional blocks such as a pin-diode based high power switch that can handle up to 52 Watts with an LTE signal (8 dB PAR) along with two LNA stages. This Switch/LNA module has a pin diode driver and dc-dc converter circuits integrated into the module and thus requires a single 5 V supply.
 
Download Datasheet | Product Details
 
RF Transceiver
2.4 GHz Long Range (LoRA) Transceiver

RF Transceiver from Semtech

The SX1281 from Semtech is a Long range, low power 2.4 GHz Wireless RF Transceiver with the linearity to withstand heavy interference. The device has an Rx sensitivity of up to -132 dBm and can transmit up to 12.5 dBm of power. It supports LoRa, FLRC, (G)FSK modulations and has excellent blocking immunity.
 
Download Datasheet | Product Details
 
RF Connector
Field Replaceable SSMA Jack Connector with EMI Gasket & Hermetic Seal

RF Connector from Jyebao

The SSMA8F26E-0012 from Jyebao is a 2 hole flange SSMA field replaceable jack with EMI gasket & hermetic seal. The connector is made up of brass and accepts a pin size of 0.3 mm.
 
Download Datasheet | Product Details
 
Power Divider
2-Way Power Divider/Combiner from 10 to 43.5 GHz

Power Divider from Mini Circuits

The EP2KA+ from Mini-Circuits is a 2-way power divider/combiner that operates from 10 to 43.5 GHz. It can handle up to 1.25 W of input power, has an insertion loss under 2.8 dB and isolation over 17 dB. This model is manufactured using GaAs IPD technology providing excellent amplitude unbalance of 0.18 dB, high level of ESD protection and excellent reliability.
 
Download Datasheet | Product Details
 
RF Connector
Solderless Vertical Launch Connectors up to 50 GHz

RF Connector from Pasternack Enterprises Inc

The vertical launch connectors from Pasternack operate up to 50 GHz. This series consists of 12 models that provide a VSWR as low as 1.3:1, depending on the model. These vertical launch connectors boast a reusable clamp attachment and can be used for microstrip or stripline. They are offered in male and female versions, covering 2.4 mm, 2.92 mm and SMA interfaces, and all models provide solderless installation.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news stories, white papers, information on new product releases and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]