Sponsored: Android App by everything RF | |
|
 New RF & Microwave Products this Week |
|
|  | RF Connector from MOLEX The SMA Connector series from Molex are high performance sub miniature connectors for frequencies up to 18 GHz. The threaded coupling insures uniform contact of the outer conductors, which enables the SMA to minimize reflections and attenuation at higher frequencies while providing a high degree of mechanical strength and durability. These connectors are made in in brass, beryllium copper and stainless steel materials. They are ideal for high speed wireless applications. Download Datasheet | Product Details
|
| | |
|
|  | RF Cable Assembly from HASCO Components The HBTC series (HASCO Bend Test Cable) are phase stable and low loss cable assemblies that operate up to 46 GHz. They have a 26 pF/Ft capacitance and 78% velocity propagation with an insertion loss of 0.78 dB per ft. at 26 GHz. The cables are available with 2.92mm Male and Female connectors. They are RoHS compliant and have a stainless steel armor. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Avago Technologies The MGA-43003 from Avago Technologies is a matched power amplifier module intended for use as the final stage high linearity amplifier in picocells and femtocells for small cell Base Station downlink applications. It operates in the 1.805 to 1.88 GHz band and requires a 5 V supply. The amplifier has a high gain of 41.7 dB, good efficiency and high linearity: Typical -28 dBc ACLR1 at 27 dBm. It is available in a low cost compact 5 x 5 mm package. Download Datasheet | Product Details
|
| | |
|
|  | Signal Generator from Holzworth Instrumentation The HSX Series are soon to be released frequency sources that will be available in three frequency configurations – 10 MHz to 6 GHz, 10 GHz and 20 GHz. They have an output power range from -110 dBm to 18 dBm. These frequency sources have been developed to have a low phase noise, high spurious rejection and high harmonic /sub-harmonic rejection phase noise. Download Datasheet | Product Details
|
| | |
|
|  | Frequency Synthesizer from NEL Frequency Controls The N-DCN-DC103-102 (V2) – IR is an X-Band Frequency Synthesizer that operates from 9 to 10 GHz with a step size of 1 MHz. It has an output power of 12 dBm and a phase noise of less than -106 dBc/Hz at a 1 KHz offset. The frequency synthesizer requires 15V of DC supply and consumes 800 mA of current. It is available in a connectorized module with SMA Female connectors. Download Datasheet | Product Details
|
| | |
|
|  | Band Pass Filter from Lark Engineering The UTMS Series of filters are thin surface mount lumped element filters. These can be customized to the customers spec to have a centre frequency from 20 to 5000 MHz, a 3dB relative bandwidth that ranges from 10 to 60 MHz and to have 3 to 7 sections. The filter has an impedance of 50 Ohms, and a low insertion loss that varies based on centre frequency and bandwidth selected. It can handle up to 20 G’s of shock and 10 G’s of vibration. The filters can operate at a temperature range from - 40°C to + 85°C. Download Datasheet | Product Details
|
| | |
|
|  | Block Up Converter/SSPA from Advantech Wireless The 2300-G Series are Block Up Converters/Solid State Amplifiers with an output power of 60 W, 80 W, 100 W or 125 W. It accepts an L Band input signal from 950 to 1700 MHz and up converts it to 13.75 to 14.5 GHz. SSPA has a gain of 60 dB and the BUC has a gain of 70 dB. The device is based on Gallium Nitride technology and can operate at a temperature from -55 to 70 Degrees C. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Planar Monolithics Industries The PA-40-17D521D5-5R0-36-12-292FF from PMI is a power amplifier which operates from 15.7 to 21.5 GHz. It provides up to 36 dBm of power(P1dB), a gain of 40 dB with a flatness of 1.75 dB and a noise figure of 5 dB. It has spurious of -60 dBc and requires a 9 to 12 V DC supply. The amplifier has SMA-Female connectors and is housed in a module which measures 2.6" x 2.0" x 0.5". Download Datasheet | Product Details
|
| | |
|
|  | Power Divider from MECA The LPR2N-1.900-M01WWP is a 2 Way low PIM power divider that operates from 0.698 to 2.7 GHz. It can handle up to 700 W of power and has an insertion loss of 0.3 dB typically. The power divider has a PIM level of below -153 dBc (-165 dBc typically). It is available in a connectorized module with N Type - Female brass albaloy plated connectors. The divider operates at a temperature from -55° C to +85° C and weighs 10.2 oz. Download Datasheet | Product Details
|
| | |
|
|  | Power Divider from VidaRF The VPD-0627A3 is a 3 way rf power divider that operates from 0.698 to 2.7 GHz for all wireless applications from cellular through UMTS. It can handle up to 30 Watts of power, has an insertion loss of less than 0.9 dB and an isolation over 20 dB. The power divider is available with SMA, QMA or alternative connector options. Download Datasheet | Product Details
|
| | |
|
|  | GaN Amplifier from RFHIC The HT2626-15M from RFHIC is a 2 stage GaN hybrid power amplifier. It operates at a frequency range from 2610 MHz to 2690 MHz, has a power gain of 27.5 dB to 32.5 dB, with a supply voltage of 28 V and draws 260 mA of current. It provides an average output power of 33 dBm and is ideal for use in RF sub-systems, base stations, repeaters, small cells and LTE systems. This device is available in a surface mount package that measures 20.5 x 15 x 3.5 mm and is matched to 50 Ohms at the input and output. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Ophir RF The 7004 from OphirRF is a 22 Watt multi-channel broadband Gallium Nitride amplifier system that operates from 20 to 2000 MHz. It has a P1dB of 10 Watts and a VSWR of 2:1 with harmonics of -20 dBc from 1 to 2 GHz and spurious signals of less than -60 dB. The system includes high power RF switches and can be controlled by a front panel keypad or via an RS232/Ethernet. Download Datasheet | Product Details
|
| | |
|
|  | Fixed Attenuator from Aeroflex - Inmet The AS398 Attenuators are 1 Watt Fixed attenuators that operate from DC to 3 GHz with SMA Connectors (MIL-STD-348 Compliant). They are available in attenuation configurations from 1 to 10 dB, 12 dB, 15 dB and 20 dB. The attenuators have an accuracy of 0.5 dB and a VSWR of 1.25:1. They are matched to 50 ohms and operate from –40 to 80 degrees C. Download Datasheet | Product Details
|
| | |
|
|  | Modulator from Analog Devices The ADRF6720 is a wideband Quadrature Modulator with an integrated Fractional-N PLL and VCO. A local oscillator signal from 356.5 MHz to 2855 MHz can be generated internally via the on-chip integer-N and fractional-N synthesizer. Alternatively a high frequency LO signal can be generated externally. The ADRF6720 is available in a 40-lead 6 x 6 mm package which is RoHS compliant. Download Datasheet | Product Details
|
| | |
|
|  | RF Mixer from Marki Microwave The MLIQ-0218 from Marki Microwave is a miniaturized, multi-octave IQ mixer that operates from 2 to 18 GHz. It consists of a matched double balanced mixer with an integrated LO hybrid and power divider. It is ideal for communications or radar systems with advanced digital modulation formats and phase modulated signals, test and measurement, or electronic warfare. Image reject or single sideband modulation is possible with use of an external IF quadrature (90°) hybrid. This mixer is available in a compact chip styled package which measures 0.370” x 0.160” x 0.010” or a connectorized module. Download Datasheet | Product Details
|
| | |
|
Android App by everything RF | .gif) | RF Calculator - Android App by everything RF The RF Calculator is an Android App from everything RF that includes a suite of useful RF calculators. These include - Attenuator Calculators, Unit Conversions, Link Budget Calculator, Skin depth Calculation, VSWR Calculator and many others. Download it now! |
|
|
