PREV 12th Sept, 2018 NEXT

New RF & Microwave Products this Week

12 Sept, 2018 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 12 Sept, 2018
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
RF Switch
SP4T Digital MEMS Switch from DC to 12 GHz

RF Switch from Menlo Micro

The MM5120 from Menlo Micro is a SP4T MEMS Based Digital-Micro-Switch that operates from DC to 12 GHz. It provides ultra-low insertion loss and superior linearity from DC to 12 GHz, with greater than 3 billion switching cycles guaranteed at elevated temperatures of +85ºC. This switch can handle an average CW power of up to 25 W and a pulsed power of up to 150 W.
 
Download Datasheet | Product Details
 
Digital Phase Shifter
6-bit GaAs Phase Shifter Die from 8 to 13 GHz

Digital Phase Shifter from VIPER RF

The VRFC0003-BD from Viper RF is a 6-bit GaAs phase shifter die that operates from 8 to 13 GHz and provides 360 degrees of phase coverage with a 5.625 degree phase step. The phase shifter has an insertion loss of 5.7 dB and a RMS phase error of 2.6 degrees (at 3 GHz). The RF ports are DC blocked and matched to 50 Ohm.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
8-Bit Programmable PIN Diode Attenuator from 0.3 to 6 GHz

RF Variable Attenuator from Planar Monolithics Industries

The DTA-30M6G-60-CD-1 from PMI is a 8-Bit programmable PIN diode attenuator that operates from 0.3 to 6 GHz. It has an attenuation range of 60 dB with a step resolution of 0.25 dB. This attenuator provides ultra-fast switching speeds of 50 usec and can handle an input power of up to 20 dBm. It operates on a single 12 VDC supply and draws only 155 mA of current.
 
Download Datasheet | Product Details
 
RF Transistor
400 W GaN on SiC HEMT from 3.4 to 3.6 GHz

RF Transistor from Wolfspeed, A Cree Company

The GTRA364002FC-V1 from Wolfspeed is a GaN on SiC High Electron Mobility Transistor that operates from 3.4 to 3.6 GHz. It provides an output power of 400 W and a gain of 13 dB while operating from 48 V supply. This Pulsed CW device is available in a thermally-enhanced surface mount package with earless flange and is ideal for use in multi-standard cellular power amplifier applications.
 
Download Datasheet | Product Details
 
Antenna
Multi-Band, High Precision GNSS Antennas

Antenna from u-blox AG

The ANN-MB multi-band active GNSS antennas from u-blox support signals on the L1 and L2/L5 bands of the four key global navigation satellite constellations (GPS, GLONASS, Galileo, and BeiDou). They deliver a gain of up to 28 dB while operating over a 5 V supply. The antennas measure 60 x 55 x 22.5 mm, have versatile mounting and connector options (SMA, SMB, MCX) and support an extended temperature range of up to 105°C.
 
Download Datasheet | Product Details
 
Antenna
Active Antenna Module for GNSS Applications

Antenna from Antenova

The RADIONOVA M20047-1 from Antenova is an active antenna module for GNSS applications from 1559-1609 MHz. It supports GPS, GLONASS, GALILEO and BeiDou constellations. The antenna module consists of an SMD antenna with built-in active components: an LNA and SAW filter to boost antenna performance in environments where there is a restricted view of the sky or where line-of-sight to the horizon is difficult.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Mouser
Mouser Supplies Cellular Smart Modems Supporting Cellular IoT Connectivity Integration.
Fully FCC and carrier certified, Digi XBee Cellular LTE-M / NB-IoT Ready Embedded Modems offer a simple way to integrate low-power cellular connectivity. Other features include programmability, full USB support, Bluetooth® ready with BLE and Mesh connectivity, plus built-in Digi TrustFence device security. Click here to learn more.
 
 
 
RF Amplifier
10 W S-Band Solid State Power Amplifier from 2 to 2.5 GHz

RF Amplifier from NuWaves Engineering

The 12B01A-09 from NuWave Engineering is a 10 watt CW solid state power amplifier that operates from 2 to 2.5 GHz. This GaN amplifier has a PAE of 30% to 50% and gain of 45 dB. It is available in a compact module that measures 3.00 x 2.00 x 0.65 inches. This amplifier is ideal for broadband RF telemetry, Unmanned Ground Vehicles, software defined radios and tactical communication systems.
 
Download Datasheet | Product Details
 
RF Switch
SP16T Absorptive Switch from 0.5 to 8 GHz

RF Switch from Pulsar Microwave

The SW16AD-21 from Pulsar Microwave is an absorptive SP16T switch that operates from 0.5 to 8 GHz. The switch has an insertion loss of less than 5.5 dB and an isolation of over 60 dB. It can handle up to 200 mW (23 dBm) of power and has a switching time of 100 ns. This switch requires a +/- 5V supply voltage and consumes up to 400 mA of current.
 
Download Datasheet | Product Details
 
RF Amplifier
10 W Power Amplifier Module from 6 to 18 GHz

RF Amplifier from KeyLink Microwave

The KB60180M40A from KeyLink Microwave is a multi-octave high power amplifier that operates from 6 to 18 GHz. This GaN amplifier provides a saturated output power of 10 Watts with a gain of 40 dB. It is available in a module that measures 150 x 90 x 25 mm with SMA female connectors and is ideal for for jamming, EMC, test and measurement applications.
 
Download Datasheet | Product Details
 
RF Switch
SPST RF Switch from 0.1 to 40 GHz

RF Switch from General Microwave

The F9016 from Kratos is a reflective SPST switch that operates from 100 MHz to 40 GHz. It provides an isolation of over 50 dB with an insertion loss of under 5 dB and has a switching time of less than 250 nsec. The switch can handle up to 200 mW of CW or pulsed power and requires a supply voltage of -15 to 5 V while consuming less than 60 mA of current.
 
Download Datasheet | Product Details
 
Directional Coupler
10 dB Directional Coupler from 10 to 40 GHz

Directional Coupler from ET Industries

The C-1040-10 from ET Industries is a Directional Coupler that operates from 10 to 40 GHz. This 10 dB coupler has an insertion loss of under 1.6 dB and a directivity of up to 12 dB. It can handle an average input power of up to 20 watts and a peak power of 3 kW. The C-1040-10 is available in a module with K-type female connectors.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
100 kHz to 1 GHz RF Synthesizer Module

Frequency Synthesizer from Holzworth Instrumentation

The HSM1001A from Holzworth Instrumentation is an RF synthesizer module that operates from 100 kHz to 1 GHz. It is a microwave CW source that is architected on a non-PLL based platform. The digital-analog hybrid design provides excellent phase noise performance and spurious response, which compliments the phase coherent nature of this digital-analog hybrid signal source.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
 
 
 
90 Degree Hybrid Coupler
90 degree Hybrid Coupler Die from 2 to 9 GHz

90 Degree Hybrid Coupler from Marki Microwave

The MQS-0209 from Marki Microwave is a 90 degree Quadrature Hybrid Coupler that operates from 2 to 9 GHz. The hybrid coupler has an isolation of 16 dB, amplitude balance of 0.5 dB and phase balance of +/- 3 degrees. It has been developed using Passive GaAs MMIC technology and is available as a wire bondable chip or connectorized module.
 
Download Datasheet | Product Details
 
Cellular Module
LTE Cat 4 module for M2M and IoT applications

Cellular Module from Quectel

The EG25-G from Quectel is a LTE Cat 4 module that provides global connectivity on up to 30 bands, covering LTE, 3G and 2G all from a single SKU. Adopting the 3GPP Release 11 LTE technology, it delivers 150 Mbps downlink and 50 Mbps uplink peak data rates, with an optional GNSS receiver including GPS, GLONASS, BeiDou, Galileo and QZSS to provide quick and accurate positioning.
 
Download Datasheet | Product Details
 
RF Cable Assembly
N plug to N jack Super flexible Cable Assembly up to 18 GHz

RF Cable Assembly from Jyebao

The N30N80-63-18GXXX from Jyebao is an N plug to N jack super flexible cable assembly that operates up to 18 GHz. This test cable is available in different lengths and has a return loss of 18 dB. It can operate over a wide temperature range from -40 to 85 C.
 
Download Datasheet | Product Details
 
Power Divider
2-Way Stripline Power Splitter/Combiner from 2 to 18 GHz

Power Divider from Werbel Microwave

The WMPD02-2-18-S from Werbel Microwave is a 2-way stripline power splitter/combiner that operates from 2 to 18 GHz. The divider has an insertion loss of less than 0.9 dB and an isolation of over 16 dB. It can handle up to 10 watts of power as splitter and has a good VSWR. The WMPD03-2-18-S is available in a module that measures 2.25 x 1 x 0.38 inches with SMA female connectors.
 
Download Datasheet | Product Details
 
EMF Meter / Antenna
Electromagnetic Field Strength Meter from DC to 40 GHz

EMF Meter / Antenna from WaveControl

The SMP2 from Wave Control is an Electromagnetic Field Strength Meter. This 2-in-1 device has a field probe range from DC to 40 GHz using RMS/Isotropic Field probes and can be used industrial frequency spectrum analysis from DC to 400 kHs (Real-time FFT). It can be used to to conduct high-quality measurements easily.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
2-Port Modular Vector Network Analyzer from 400 to 6000 MHz

Vector Network Analyzer from MegiQ

The VNA-0460 from MegiQ is a two port bi-directional vector network analyzer that operates from 400 to 6000 MHz. It is controlled via a PC through a USB connector. This VNA is ideal for measuring all kinds of circuits like antennas, attenuators, amplifiers etc. Its frequency range includes the most popular telecom bands like GSM-GPRS-LTE, WiFi, DECT, GPS, ISM, Zigbee, Bluetooth.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news stories, white papers, new product information, interviews and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]