PREV 3rd Oct, 2018 NEXT

New RF & Microwave Products this Week

3 Oct, 2018 - everything RF Newsletter

New products this week.

 
everything RF
Date: 3 Oct, 2018
 
Sponsored by Coilcraft
 
 
 
New RF and Microwave Products this Week
Directional Coupler
W1 Coaxial Precision Directional Coupler from 20 to 110 GHz

Directional Coupler from Anritsu

The MN25110A is a precision directional coupler that operates from 20 GHz to 110 GHz. It is equipped with Anritsu's Trademarked W1 connectors (1.0 mm compatible) that achieve the smallest possible reflections and have a very low broadband insertion loss. The MN25110A is scalable, allowing users access to broadband measurements through E, V and W band.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
2 W Variable Step Attenuator from DC to 2.5 GHz

RF Variable Attenuator from MECA

The 685-50-1 from MECA is a variable step attenuator that operates from DC to 2.5 GHz. The attenuator has an attenuation range of 0 to 50 dB in 1 dB steps. It has an insertion loss of under 1 dB and can handle an average input power of up to 2 watts. This attenuator is available in a module with N-type female connectors.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Real-Time Spectrum Analyzer with GNSS Capabilities

RF Spectrum Analyzer from ThinkRF

The R5700 from ThinkRF is a handheld/portable Real-Time Spectrum Analyzer with built-in GNSS capabilities for mobile wireless situational awareness applications such as drive testing, coverage mapping, propagation analysis, direction finding & transmitter localization and vehicle-based spectrum monitoring.
 
Download Datasheet | Product Details
 
Front End Module
860 to 930 MHz RF Front-End Module

Front End Module from Skyworks Solutions

The SKY66423-11 is a highly integrated RF front-end module designed for high-power Industrial, Scientific, Medical (ISM) band applications operating in the 860 to 930 MHz frequency range. It is designed for ease of use and maximum flexibility with fully matched 50 Ohm TX, RX inputs and antenna outputs. It also has digital controls compatible with 1.6 to 3.6 V CMOS levels.
 
Download Datasheet | Product Details
 
TCXO
SMD TCXO from 16.368 to 38.4 MHz

TCXO from IQD Frequency Products

The IQXT-225 from IDQ is a Temperature Controlled Crystal Oscillator (TCXO) that operates from 16.368 to 38.4 MHz. It requires a supply voltage of 1.2 V and has a clipped sinewave output with 10 kOhm//10pF drive capability. The TCXO has a phase noise of -135 dBc/Hz at 1 kHz and operates over a temperature range of -30ºC to 85ºC.
 
Download Datasheet | Product Details
 
Front End Module
Compact FEM for Wi-Fi 802.11b/g/n/ac/ax Systems

Front End Module from Qorvo

The QPF7221 is a compact front end module (FEM) for Wi-Fi 802.11b/g/n/ac/ax systems. The FEM integrates a 2 GHz power amplifier (PA), SPDT switch and bypassable low noise amplifier (LNA) and an Rx BAW filter into a single device. It provides state of the art LTE coexistence Rx immunity for maximum range and coverage by integrating high-performance temperature stable BAW filtering on receive chain.
 
Download Datasheet | Product Details
 
Sponsored by Coilcraft
0402DF Series Ferrite Chip Inductors
Ferrite Chip Inductors Offer Highest L and Lowest DCR
Coilcraft’s 0402DF Series chip inductors offer higher inductance values and significantly lower DC resistance than other 0402-sized inductors, making them ideal for RF choke and filtering applications. Offered in 25 inductance values from 20 to 3300 nH. Download datasheet!
 
 
 
Antenna
Two-Port 45-degree Sector Antenna from 4.9 to 6.4 GHz

Antenna from Mimosa

The N5-45x2 from Mimosa is a two port, dual-slant polarization 45-degree sector antenna that operates from 4.9 to 6.4 GHz. This antenna is custom-engineered to deliver a high-gain of up to 19 dBi, 42º half-power beamwidth with non-existent side lobes and an unprecedented 43 dB front-to-back (FTB) ratio.
 
Download Datasheet | Product Details
 
RF Amplifier
10W L & S-Band Solid State Power Amplifier from 1.5 to 2.5 GHz

RF Amplifier from NuWaves Engineering

The 12B01A-07 from NuWave Engineering is a 10 watt CW solid state power amplifier that operates from 1.5 to 2.5 GHz. This GaN amplifier has a PAE of 30% to 50% and gain of 40 dB. It is available in a compact module that measures 3.00 x 2.00 x 0.65 inches with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
Solid State Power Amplifier from 1 to 20 GHz

RF Amplifier from Exodus Advanced Communications

The AMP2120 is a solid state power amplifier that operates from 1 to 20 GHz. It provides an output power of more than 20 watts with a gain of over 43 dB. This rack mount amplifier can be controlled via the front panel on the amplifier system. It is available in a rack mount unit that measures 430 x 133 x 562 mm with SMA female connectors and weighs 20 kg.
 
Download Datasheet | Product Details
 
RF Amplifier
Waveguide Low Noise SATCOM Amplifier from 1.5 to 1.6 GHz

RF Amplifier from AmpliTech

The APTW4-01500160-30K10-WR650-D6 from Amplitech is a low noise SATCOM amplifier that operates from 1.5 to 1.6 GHz. It provides a gain of 55 dB with a gain flatness of 0.5 dB and noise temperature of 30 K i.e 0.4 dB. This amplifier has been designed for TELECOM and SATCOM applications, like Satellite Phones, Satellite Radios and military devices for communication across land, air and sea.
 
Download Datasheet | Product Details
 
RF Cable
Triple Shielded, Low Loss Cable Assemblies up to 40 GHz

RF Cable from MegaPhase

The NextPhase series from MegaPhase are Triple Shielded, Low Loss Cable Assemblies that operate up to 40 GHz. These high performance interconnect cables are designed for end users who need exceptional insertion loss performance. These low density dielectric cables are available in a variety of diameters which can be selected based on the end item loss and frequency requirements.
 
Download Datasheet | Product Details
 
Between Series RF Adapter
Mitered 1.85mm plug to 2.4mm plug Right Angle Adapter up to 50 GHz

Between Series RF Adapter from Jyebao

The ALS-1.85/3-2.4/3-1.2 from Jyebao is a Mitered 1.85mm plug to 2.4mm plug, between series right angle adapter that operates up to 50 GHz. It has a VSWR of up to 1.25:1 and is matched to 50 ohms. The adapter has a stainless steel body with a Beryllium Copper center contact and retainer ring.
 
Download Datasheet | Product Details
 
Sponsored by Coilcraft
 
 
 
RF Transistor
35 W CW LDMOS Power Transistor from 1.8 to 512 MHz

RF Transistor from NXP Semiconductors

The MRFX035H is a 65 V LDMOS power transistor that operates from 1.8 to 512 MHz. It delivers an output power of up to 35 W CW with an efficiency of more than 32% and a gain of over 17.3 dB. The device can be used in a single-ended or push-pull configuration and is also suitable for linear applications with appropriate biasing.
 
Download Datasheet | Product Details
 
RF Transistor
750 W LDMOS Power Transistor from DC to 1300 MHz

RF Transistor from Ampleon

The BLF13H9L750P from Ampleon is an LDMOS RF power transistor that operates from DC to 1300 MHz. It delivers 750 Watt (CW) of power while operating from a 50 V power source. The transistor has integrated dual sided ESD protection, excellent thermal stability and provides power efficiency of more than 62%.
 
Download Datasheet | Product Details
 
Waveguide Attenuator
70 dB, V-Band Variable Attenuator from 50 to 75 GHz

Waveguide Attenuator from SAGE Millimeter

The STA-60-15-D8 from Sage Millimeter is a V-band direct reading, rotary vane attenuator that operates from 50 to 75 GHz. The attenuator has a large scale calibrated dial which indicates the attenuation value directly. It has an attenuation range of up to 70 dB, an insertion loss of below 1 dB and can handle an input power of up to 150 mW.
 
Download Datasheet | Product Details
 
RF & Microwave Circulator
30 W Surface Mount Circulator from 4.4 to 5 GHz

RF & Microwave Circulator from RF-CI

The RFCR5919D from RF-CI is a surface mount circulator that operates from 4.4 to 5 GHz. It has an insertion loss of under 0.3 dB, isolation of over 20 dB and can handle an average input power of up to 30 watts.
 
Download Datasheet | Product Details
 
Wireless Charging Solution
15 W Multi-Coil Wireless Charging Transmitter for Mobile Devices

Wireless Charging Solution from STMicroelectronics

The STWBC-MC from STMicroelectronics is the digital controller for the wireless battery charger transmitters specifically designed to support the Qi MP-A15 EPP (Extended Power Profile) multi-coil applications up to 15 W. The STWBC-MC is available in a 5 x 5 mm VFQFPN32 package and is ideal for cell phones, smartphones, tablets and phablets applications.
 
Download Datasheet | Product Details
 
RF Module
2.4 GHz Low Power, Long Range Radio Module

RF Module from IMST

The iM282A-L is a compact, low power, bi-directional radio module for the unlicensed 2.4 GHz band. It combines a powerful Cortex-M3 controller with Semtech's new ultra long range transceiver - SX1280. This module has been specifically designed for battery operated applications and is able to achieve line of sight transmissions of more than 10 km without the use of any additional amplifiers.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the latest RF & Microwave products. We list complete product catalogs from over 1,000 manufacturers and make their products searchable by specifications. Use the search tool to find products from the leading manufacturers based on your requirement.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]