PREV 10th Oct, 2018 NEXT

New RF & Microwave Products this Week

10 Oct, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 10 Oct, 2018
 
Sponsored by Digi-Key
 
 
 
New RF & Microwave Products this Week
Signal Generator
300 kHz to 8 GHz USB Controlled Signal Generator

Signal Generator from Pico Technology

The PicoSource AS108 is a frequency synthesizer that operates from 300 kHz to 8 GHz. It is designed to meet the needs of both benchtop and integrated module applications. Its broad frequency range, fast settling and programmable phase, frequency and amplitude make it ideal for a wide range of applications, with the added advantages of low cost, small footprint and 12 to 15 V power requirement.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
SMT Frequency Synthesizers from 50 to 4500 MHz

Frequency Synthesizer from EM Research

The ZLX Series from EM Research are frequency synthesizers that operate from 50 to 4500 MHz. The synthesizers provide an output power of up to 7 dBm and require an external reference of 10 MHz. The synthesized signal has a low phase noise with harmonics less than -20 dBc. The synthezisers require a supply voltage of 5 V and draw a current of less than 65 mA. They are available in a surface mount package that measures 0.6 x 0.6 x 0.15 inches.
 
Download Datasheet | Product Details
 
RF Amplifier
150 Watt Solid-State GaN Amplifier System from 0.6 to 6 GHz

RF Amplifier from Empower RF

The 2223 from Empower RF is a single band solid-state GaN system amplifier that operates from 0.6 to 6 GHz. It is capable of delivering more than 150 watts of output power with a power gain of over 53 dB. The amplifier is suitable for multi-octave bandwidth high power CW, modulated, and pulse applications.
 
Download Datasheet | Product Details
 
RF Amplifier
18,000 W Pulsed Amplifier System from 1 to 2 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 18000SP1G2 is a self-contained, forced air cooled, broadband solid-state microwave amplifier system designed for pulse applications at low to moderate duty factors where instantaneous bandwidth and high gain are required. This amplifier system operates from 1 to 2 GHz and provides pulsed power over 18,000 Watts.
 
Download Datasheet | Product Details
 
Band Pass Filter
5.2 GHz Co-Existence BAW RF Filter for Wi-Fi Applications

Band Pass Filter from Akoustis

The AKF-1252 from Akoustis is a 5.2 GHz co-existence BAW RF filter for Wi-Fi applications. Covering both U-NII-1 and U-NII-2A pass-bands, it delivers a low insertion loss of under 2 dB with a high rejection of over 50 dB and can handle an input power of up to 32 dBm. The filter is available in an ultra-small module that measures 2 x 2.5 x 0.9 mm and operates over a temperature range of -40 to 85 degree Celsius.
 
Download Datasheet | Product Details
 
RFID Tag IC
NFC/RFID Tag IC with 2 Kbits of Memory

RFID Tag IC from STMicroelectronics

The ST25DV02K-W1 is an NFC/RFID tag IC with 2 Kbits of electrically erasable programmable memory (EEPROM). This IC has two interfaces - the first one delivers up to 2x independent pulse width modulation output signals and the second is an RF link activated by the received carrier electromagnetic wave.
 
Download Datasheet | Product Details
 
Sponsored by Digi-Key
RSL10 Radio System-on-Chip (SoC)
ON Semiconductor RSL10 Ultra-Low-Power, Multi-Protocol, Bluetooth® 5 Certified Radio SoC
ON Semiconductor's RSL10 multiprotocol Bluetooth 5 certified radio SoC brings ultra-low-power wireless technology to IoT. Offering the industry’s lowest power consumption, RSL10 provides devices like heart rate monitors advanced wireless features while optimizing system size and battery life. Click here to learn more.
 
 
 
TCXO
Rugged, Radiation Tolerant TCXO from 10 to 50 MHz

TCXO from Greenray Industries

The T1254 from Greenray Industries is a TCXO that operates from 10 to 50 MHz. It requires a supply voltage of 5 V and has a CMOS output. The device has a stability of ±1.0ppm over a temperature range of -20 to +70°C. It is available in a rugged, radiation tolerant package that measures 20.3 x 12.7 mm.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
10 MHz to 20 GHz RF Synthesizer Module

Frequency Synthesizer from Holzworth Instrumentation

The HSM18001B from Holzworth Instrumentation is a RF synthesizer module that operates from 10 MHz to 20 GHz. This microwave CW source is architected on a non-PLL based platform. The digital-analog hybrid design provides excellent phase noise performance and spurious response, which compliment the phase coherent nature of these digital-analog hybrid signal sources.
 
Download Datasheet | Product Details
 
RF Amplifier
Pulsed Power Amplifier Module for L-band Avionic Systems

RF Amplifier from Integra Technologies, Inc.

The IGNP1011L2400 from Integra is a GaN-on-SiC power amplifier module/pallet that operates from 1030 to 1090 MHz. This power amplifier has been designed specifically for IFF/SSR systems operating under either Mode S ELM (48x {32µs on, 18µs off}, 6.4% Long Term Duty Cycle) or standard Mode S (128µs, 2% Duty Cycle) pulse conditions.
 
Download Datasheet | Product Details
 
Front End Module
8.5 to 10.5 GHz GaN Transmit / Receive Module

Front End Module from Qorvo

The QPM1002 is a GaN MMIC front-end module that operates from 8.5 to 10.5 GHz. The MMIC has a T/R switch, low-noise amplifier, and a power amplifier. The receive path provides a gain of 25 dB with a low noise figure of 2.2 dB. The transmit path provides a small signal gain of 33 dB, it can deliver 3 W of saturated power with a PAE of 32%, with a 25 dB of large signal gain.
 
Download Datasheet | Product Details
 
Power Divider
8 Way Reactive Power Divider from 0.4 to 6 GHz

Power Divider from JFW Industries

The 50PD-838 from JFW Industries is an 8-Way Reactive Wilkinson power divider/combiner that operates from 0.4 to 6 GHz. It has an insertion loss of less than 3.5 dB and isolation of over 11 dB. The device can handle up to 5 watts of input power and is available in a module with N-type female connectors.
 
Download Datasheet | Product Details
 
90 Degree Hybrid Coupler
Quadrature Hybrid Coupler from 4 to 18 GHz

90 Degree Hybrid Coupler from Marki Microwave

The MQS-0418 from Marki Microwave is a MMIC Quadrature [90 degrees] Hybrid Coupler that operates from 4 to 18 GHz. The hybrid coupler has an isolation of 16 dB, amplitude balance of 0.4 dB and phase balance of +/- 0.5 degrees. It has been developed using Passive GaAs MMIC technology and is available as a wire bondable chip or connectorized module.
 
Download Datasheet | Product Details
 
Sponsored by Digi-Key
 
 
 
Front End Module
860 to 930 MHz RF Front-End Module

Front End Module from Skyworks Solutions

The SKY66420-11 is a highly integrated RF front-end module designed for high-power Industrial, Scientific, Medical (ISM) band applications operating in the 860 to 930 MHz frequency range. It is designed for ease of use and maximum flexibility with fully matched 50 Ohm TX, RX inputs and antenna outputs. It also has digital controls compatible with 1.6 to 3.6 V CMOS levels.
 
Download Datasheet | Product Details
 
RF Amplifier
100 W Rack-Mount Amplifier from 500 to 2700 MHz

RF Amplifier from KeyLink Microwave

The KB0527S50A is a rack-mountable amplifier unit that operates from 500 to 2700 MHz. This GaN based amplifier provides excellent power density, high efficiency, low distortion and wide dynamic range. This amplifier provides up to 100 wats of power (CW, AM and FM modulation) with a gain of 48 dB. It is available as a standard 19" rack unit with front panel for adjusting the gain and power levels.
 
Download Datasheet | Product Details
 
RF Switch
GaAs SPDT Non-Reflective Switch from DC to 30 GHz

RF Switch from MACOM

The MASW-011102 is a GaAs-based SPDT switch that operates from DC to 30 GHz. This non-reflective SPDT switch has a low insertion loss of 1.8 dB and high isolation of 40 dB at 30 GHz. It utilizes MACOM's patented low gate-lag GaAs process to deliver uncompromising performance and fast switching speed up to 40 ns.
 
Product Details
 
RF Connector
Solderless Vertical Launch PCB Connectors up to 50 GHz

RF Connector from Fairview Microwave

The vertical launch PCB connectors from Fairview Microwave operate up to 50 GHz. These removable vertical launch connectors have a reusable clamp attachment and can be used for microstrips or striplines, to provide solderless installation. They also feature a gold-plated beryllium copper center contact, a stainless steel outer conductor and Polyetherimide (PEI) insulators.
 
Download Datasheet | Product Details
 
USB Power Sensor
10 MHz to 26.5 GHz True RMS Power Sensor

USB Power Sensor from LadyBug Technologies

The LB589A from LadyBug Technologies is an USB power sensor/meter that operates from 10 MHz to 26.5 GHz. This general purpose power meter can measure average power or True RMS and do scalar measurements. It has a fast measurement speed and a dynamic range of -55 dBm to 20 dBm. The sensor can be used in research & development, manufacturing & service applications including radar, satellite and telecommunications.
 
Download Datasheet | Product Details
 
Antenna
4-Port Sector Antenna from 3.5 to 4.2 GHz

Antenna from KP Performance Antennas

The KP-3SX4-33 is a sector antenna that operates from 3.5 to 4.2 GHz. This sector antenna is specially designed to deliver high, stable gain over wide bandwidths and suppress side-lobes and back-lobes for mitigating inter-sector interference. It delivers a gain of up to 18.8 dBi with 33 degree beamwidth and can handle an input power of below 50 W.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the latest RF & Microwave Products. Our weekly newsletter tells you about new product releases from the leading manufacturers every week.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]