1. everything RF
  2. RF Newsletters
more
PREV 14th Nov, 2018 NEXT

New RF & Microwave Products this Week

14 Nov, 2018 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 14 Nov, 2018
 
Sponsored by Mouser
 
 
 
New Products this Week
RF Transistor
Dual-Stage 250 W LDMOS RF Power Module for 2.4 GHz ISM Applications

RF Transistor from Ampleon

The BPC2425M9X2S250-1 from Ampleon is a 250 Watt LDMOS Transistor designed for high power continuous wave (CW) industrial, scientific and medical (ISM) applications from 2,400 MHz to 2,500 MHz. When operating from a 32 VDC supply, the module has a peak output of 290 Watts (CW), 300 Watt (pulsed) and an efficiency of 59% (CW), 61% (pulsed) and a gain of 31 dB.
 
Download Datasheet | Product Details
 
RF Switch
SP4T Switch from DC to 26.5 GHz

RF Switch from Atlanta Micro

The AM6017 from Atlanta Micro is a SP4T switch that operates from DC to 26.5 GHz. The positive control device (3 to 5V control) provides a low insertion loss of under 2 dB, flat frequency response, and high isolation of more than 30 dB over the operating temperature range from -40C to +85C. It is available in a 4 mm QFN package.
 
Download Datasheet | Product Details
 
GNSS Module
Multi-band GNSS Receiver with Nanosecond-level Timing Accuracy

GNSS Module from u-blox AG

The ZED-F9T Module from u-blox is a Multi-band GNSS receiver with nanosecond-level timing accuracy. This GNSS module meets the most stringent timing synchronization requirements in 5G mobile networks on a global scale.
 
Download Datasheet | Product Details
 
RF Switch
SPDT Absorptive PIN Diode Switch from 0.1 to 50 GHz

RF Switch from Planar Monolithics Industries

The P2T-100M50G-100-T from PMI RF is an SPDT absorptive PIN diode switch that operates from 0.1 to 50 GHz. It has a high isolation of over 70 dB and a low insertion loss under 9 dB through the band. The switch can handle up to 20 dBm of power and has a VSWR of 2.5:1. It has a switching time of 50 ns.
 
Download Datasheet | Product Details
 
OCXO
MEMS OCXO from 1 to 60 MHz

OCXO from SiTime

The SiT5711 from SiTime is the industry's smallest Stratum 3E OCXO with a frequency range from 1 to 60 MHz. It has ±5 ppb frequency stability and 50 ppt/°C frequency slope. In addition to the 9 x 7 mm package (the smallest OCXO available), this device is also available in common OCXO footprints such as 25 x 22 mm, 20 x 13 mm, and 14 x 9 mm to enable drop-in replacement of legacy quartz OCXOs.
 
Download Datasheet | Product Details
 
OCXO
Low Phase Noise OCXOs from 30 to 300 MHz

OCXO from Dynamic Engineers

The OCXO2526C series of OCXOs from Dynamic Engineers operate from 30 to 300 MHz by using an internal frequency multiplication of 3x or 5x. These SMD OCXOs have a phase noise of -135 dBc/Hz at 1 kHz and a stability of ±3 ppb over a temperature range from -40 to 85°C. They require a supply voltage of 3.3/5/12 V and provide an HCMOS, TTL or sinewave waveform output.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Mouser
Mouser Supplies Cellular Smart Modems Supporting Cellular IoT Connectivity Integration.
Fully FCC and carrier certified, Digi XBee3™ Cellular LTE-M / NB-IoT Ready Embedded Modems offer a simple way to integrate low-power cellular connectivity. Other features include programmability, full USB support, Bluetooth® ready with BLE and Mesh connectivity, plus built-in Digi TrustFence device security. Click here to learn more.
 
 
 
Band Pass Filter
Ceramic Band Pass Filter from 5150 to 5950 MHz

Band Pass Filter from Reactel

The 8CX-5550-X800Q from Reactel is a Ceramic Band Pass Filter with a passband of 5150 to 5950 MHz. The filter has an insertion loss of under 3 dB and more than 40 dB of rejection @ 4800 & 6300 MHz. It can handle up to 2 watts of power and is available in a surface mount package that measures 0.22 x 0.55 x 1.33 inches with solder pads.
 
Download Datasheet | Product Details
 
Band Pass Filter
5900 MHz Low Profile LC Bandpass Filter

Band Pass Filter from Networks International Corporation

The C-1287 from NIC is a C-band LC Band Pass Filter with a center frequency of 5900 MHz and a pass band from 4275 to 7525 MHz. The filter has an insertion loss of under 4 dB and more than 40 dBc of rejection above and below the passband. It can handle an input power of up to 1 watt and is available in a surface mount package that measures 0.75 x 0.20 x 0.095 inches.
 
Download Datasheet | Product Details
 
RF Switch
SPDT Switch from 1 to 6 GHz

RF Switch from Skyworks Solutions

The SKY13585-679LF from Skyworks is a SPDT switch that operates from 1 to 6 GHz. It has a low insertion loss of 0.5 dB and a high isolation of 38 dB. This switch can handle a power of 31 dBm and requires a supply voltage of 3 to 5 Volts. It has integrated DC blocking capacitors, so no external DC blocking capacitors are required.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
50 GHz Digital Step Attenuator for 5G mm-Wave Applications

RF Variable Attenuator from pSemi

The PE43508 from pSemi is a 6-bit, 50-ohm Digital Step Attenuator that operates from 9 kHz to 50 GHz. It has a 31.5 dB attenuation range in 0.5 dB and 1 dB steps, and it is capable of maintaining 0.5 dB and 1 dB monotonicity through its 50 GHz bandwidth. This high-performance DSA features low insertion loss, fast switching time and low attenuation error.
 
Download Datasheet | Product Details
 
Cellular Module
Low Power Cellular SoC for IoT and M2M Applications

Cellular Module from Riot Micro

The RM1000 is a low power SoC for Cellular IoT and Machine-to-Machine (M2M) applications. The device is a dual-mode LTE-M / NB-IoT cellular baseband with integrated SRAM and full software stack comprising LTE L2/L3, AT Command stack, and TCP/UDP/IP stack.
 
Download Datasheet | Product Details
 
RF Amplifier
Solid Stated Pulsed Power Amplifier from 9.1 to 9.5 GHz

RF Amplifier from Exodus Advanced Communications

The AMP3004-1P from Exodus Advanced Communications is a solid state pulsed power amplifier that operates from 9.1 to 9.5 GHz. The amplifier provides a pulsed output power of over 200 watts with a power gain of over 48 dB. It has a pulse width of 1 - 150 µS with a duty of 20%. This GaN amplifier is based on a class AB design and is ideal for high power - X-Band pulse applications.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
 
 
 
RF Amplifier
Cryogenic Amplifier from 1 to 20 GHz

RF Amplifier from AmpliTech

The APT4-01002000-5011-D42-LM from AmpliTech is a Cryogenic Amplifier that operates from 1 to 20 GHz. It provides an output power of 11 dBm and a gain of 42 dB with a noise figure of 5 dB. The amplifier is available in a drop-in package with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
Dual Bi-Directional SSPA Module from 4.4 to 5 GHz

RF Amplifier from Triad RF Systems

The TTRM4005DR from TraidRF is a class AB GaN Dual Bi-Directional SSPA module that operates from 4.4 to 5 GHz. The module contains two Bi-directional amplifiers. In Tx mode, it provides 44 dBm of OFDM output power per channel and a gain of 25 dB while operating from a 12 Vdc supply. In Rx mode, it provides 5 dBm of OFDM output power per channel and a gain of 10 dB with a noise figure of 2.5 dB.
 
Download Datasheet | Product Details
 
Power Divider
16-Way Radial Combiner/Divider from 2.7 to 3.5 GHz

Power Divider from Werlatone Inc

The D9706 from Werlatone is a 16-way radial power combiner/divider that operates from 2.7 to 3.5 GHz. It has an insertion loss of less than 0.35 dB and an amplitude balance of under 0.3 dB. The divider can handle up to 6000 watts of CW power and has a VSWR of under 1.35:1. It is available in a module with N-type female connectors.
 
Download Datasheet | Product Details
 
Directional Coupler
10/20 dB Directional Couplers from 2 to 18 GHz

Directional Coupler from P1dB Inc.

The P1CP-SAF-0218G Series from P1dB are directional couplers that operate from 2 to 18 GHz. They have coupling values of 10 & 20 dB and can handle up to 50 Watts of average power. These couplers have an insertion loss of under 1.3 dB, directivity of over 12 dB and a VSWR of 1.35:1. They are available in an aluminum module with SMA female connectors and are ideal for signal sampling, such as in a production test system.
 
Download Datasheet | Product Details
 
RF Test Set
Fully Integrated 5G mmWave Test System for 28 & 39 GHz Bands

RF Test Set from LitePoint

The IQgig-5G is a fully-integrated, non-signaling solution for testing 5G mmWave products at both the 28 GHz and 39 GHz frequency bands. The 1-GHz bandwidth tester covers the pre-5G and 3GPP standards evolution with EVM performance up to -40 dB for accurate device measurement. This solution has three bi-directional source and measurement ports each with a 2.92mm connector coaxial interface.
 
Download Datasheet | Product Details
 
Power Sensor
10 MHz to 6 GHz Average Power Sensor

Power Sensor from Keysight Technologies

The L2051XA from Keysight is an average power sensor that operates from 10 MHz to 6 GHz. This power divider has a wide dynamic range of -70 to +26 dBm. The sensor provides very accurate and repeatable power measurements for any modulated signal and comes with super-fast measurement speed of 50,000 readings/sec. It has a deep memory of up to 1 MB and a variable sampling rate of up to 1 MSa/s.
 
Download Datasheet | Product Details
 
RF Switch
High Power SPDT RF Switch from 2.5 to 6 GHz

RF Switch from Aethercomm

This SSHPS 2.5-6.0-150 from Aethercomm is a high power symmetrical SPDT RF switch that operates from 2500 to 6000 MHz. This switch has been designed to be integrated in communication systems where high power, low loss and excellent isolation are required. It can handle up to 150 watts of CW power and has a switching speed of 5.0 uSec.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. Our weekly newsletter keeps users up to date with new and interesting products every week.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]