PREV 21st Nov, 2018 NEXT

New RF & Microwave Products this Week

21 Nov, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 21 Nov, 2018
 
Sponsored by PCB Directory
 
 
 
New RF & Microwave Products this Week
Front End Module
High Power LNA/Switch Module from 0.4 to 4 GHz

Front End Module from MACOM

The MAIA-011002 is a high power Switch-LNA module that operates from 0.4 to 4 GHz. This compact surface mount module contains a PIN diode switch and two low noise amplifiers assembled in a 5 mm 32-lead HQFN plastic package. It is designed to be used at the input of the receive chain of TDD cellular base stations.
 
Download Datasheet | Product Details
 
Limiter
8.5 to 12 GHz SMT Power Limiter for SWaP-Sensitive Applications

Limiter from Mercury Systems

The EL0389 from Mercury Systems is a X-band power limiter that operates from 8.5 to 12 GHz. This module provides protection against CW power up to 15 watts, high peak power up to 200 watts while maintaining a low flat leakage of less than 17 dBm, and reduces Spike Leakage to less than 23 dBm. It is available in a moisture sealed package that measures 4 x 3 mm with surface mount connections.
 
Download Datasheet | Product Details
 
Digital Phase Shifter
12-Bit Digital Phase Shifter from 6 to 18 GHz

Digital Phase Shifter from G.T. Microwave, Inc.

The P2P-68T-5 is a 12-Bit digital phase shifter that operates from 6 to 18 GHz. It has a 360-degree phase control range with up to 0.088 degree resolution and switches in less than 500 ns. This device can handle an input power of up to 15 dBm CW and has a VSWR of 1.9:1. The phase shifter is available in a module that measures 3 x 3 x 1 inches and operates over an extended temperature range from -55 to +85 Degrees Celsius.
 
Download Datasheet | Product Details
 
RF Amplifier
4 W Power Amplifier for LTE Base Stations from 700 to 800 MHz

RF Amplifier from Skyworks Solutions

The SKY66296-11 is a high-efficiency power amplifier for FDD and TDD 2G/3G/4G LTE base stations operating from 700 to 800 MHz. The PA has active biasing circuitry integrated to compensate for performance over temperature, voltage, and process variation. It provides up to 4 watts of output power with a gain of up to 35 dB.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
6-Bit Digital Attenuator Die from DC to 20 GHz

RF Variable Attenuator from Aelius Semiconductors

The ASL3013 from Aelius is a 6-bit Digital Attenuator that operates from DC to 20 GHz. It provides an attenuation range of 0 to 31.5 dB in 0.5 dB steps. The attenuator bit values are 0.5 (LSB), 1, 2, 4, 8 and 16 dB (MSB) for a total attenuation of 31.5 dB. The attenuator has an RMS error of less than 1 dB over all 64 states with a maximum insertion loss of 5 dB.
 
Download Datasheet | Product Details
 
RF Amplifier
60 W Solid-State Amplifier from 0.7 to 18 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 60/20S1G18B is a portable, selfcontained, air-cooled, dual-band, broadband, solid-state amplifier that operates from 0.7 to 18 GHz. The amplifier provides an output power of up to 60 watts and has been designed for applications where instantaneous bandwidth, high gain and linearity are required. It has a Digital Control Panel (DCP) which provides both local and remote control of the amplifier.
 
Download Datasheet | Product Details
 
Featured Content
What is the 3D Smith Chart?
What is a 3D Smith Chart?
The 3D Smith chart generalizes the 2D Smith chart in the sense that all circles which never met in 2D meet in the South hemisphere which becomes the "home" of active circuits (exhibiting negative resistance) while the North hemisphere the one of passive circuits. East inductive, West capacitive.Click here to learn more.
 
 
 
Signal Generator
10 MHz to 40 GHz, Phase Coherent, Multi-Channel RF Synthesizers

Signal Generator from Holzworth Instrumentation

The HSX Series are broadband, phase coherent frequency sources that are available in five frequency configurations from 10 MHz to 3 GHz, 6 GHz, 12 GHz, 24 GHz and 40 GHz. They exhibit industry leading phase noise and spectral purity performance coupled with a highly accurate dynamic range of +20 dBm to -110 dBm.
 
Download Datasheet | Product Details
 
Cellular Module
LTE-Advanced Pro Module Approved for AT&T FirstNet Network

Cellular Module from Sierra Wireless

The AirPrime EM7511 LTE-Advanced Pro Module for Public Safety Solutions from Sierra Wireless has been specifically developed for FirstNet. FirstNet is a public safety network in the US to enhance security and provide new capabilities for first responders. This module is approved by AT&T for the FirstNet™ public safety network.
 
Download Datasheet | Product Details
 
RF Module
Secure Low-Power Wireless IPv6 Module for IoT Applications

RF Module from Integrated Device Technology

The ZWIR4532 is a programmable low-power secure IPv6 communication module for internet of things (IoT) device networks. This FCC certified module serves as a universal secure radio communication module for applications with low bandwidth requirements. It incorporates an ARM microcontroller, a Sub-GHz radio transceiver, and optional license-free IDT firmware download.
 
Download Datasheet | Product Details
 
GNSS Module
Multi-GNSS Receiver Module with Dead Reckoning

GNSS Module from Quectel

The L26-DR from Quectel is a concurrent multi-GNSS receiver module with a dead reckoning (DR) technology. The DR capability ensures the module delivers accurate positioning, even when the GNSS signal is absent or compromised. Equipped with 6-axis sensor MEMS and a powerful GNSS core, the module provides high sensitivity, fast GNSS signal acquisition and tracking with low system integration effort.
 
Download Datasheet | Product Details
 
Wireless Charging Transmitter
15 W Wireless Charging Transmitter for Mobile Devices

Wireless Charging Transmitter from STMicroelectronics

The STWBC-EP from STMicroelectronics is the digital controller for the wireless battery charger transmitters specifically designed to support the WPC 1.2 EPP (Extended Power Profile) applications up to 15 W. This transmitter is responsible for controlling the transmitting coil and generating the correct amount of power requested by the RX.
 
Download Datasheet | Product Details
 
Directional Coupler
Directional Couplers from 2 to 8 GHz with 6, 10, 20 & 30 dB Coupling Options

Directional Coupler from MECA

The 780-dB-5.000 Series of directional couplers from MECA are broadband miniature couplers that operate from 2 to 8 GHz and are available in coupling values of 6, 10, 20 & 30 dB with a directivity of 20 dB. The coupler can handle up to 50 watts of CW power and 3kW of peak power. It has an insertion loss of 0.4 dB and a VSWR of 1.2:1. These directional couplers are avilable in a module with SMA connectors.
 
Download Datasheet | Product Details
 
Sponsored by PCB Directory
 
 
 
RF Amplifier
Low Noise Amplifier from 2 to 50 GHz

RF Amplifier from ERZIA

The ERZ-LNA-0200-5000-22-6 is a Low Noise Amplifier that operates from 2 to 50 GHz. It provides an output power of 10 dBm and a gain of 22 dB with a noise figure of 5 dB. The LNA requires a 12 V supply and consumes 1.3 watts of power. It is available in a 16 x 30 x 17.5 mm module with 2.4 mm female connectors and is ideal for aerospace, military, satcom and telecom applications.
 
Download Datasheet | Product Details
 
RF & Microwave Isolator
4 to 8 GHz Cryogenic Triple Junction Isolator

RF & Microwave Isolator from Low Noise Factory

The LNF-ISISISC4_8A from Low Noise Factory is a cryogenic triple junction isolator that operates from 4 to 8 GHz. It provides an isolation of 60 dB and insertion loss of 0.5 dB. The isolator has been designed to meet the strict requirements of ultra-low temperature physics research. The isolator is available in a slim coaxial module that measures 67.1 x 24.6 x 10.2 mm with SMA connectors.
 
Download Datasheet | Product Details
 
Frequency Multiplier
20 to 60 GHz Broadband MMIC Frequency Doubler

Frequency Multiplier from Marki Microwave

The MMD-2060L from Marki Microwave is a broadband MMIC frequency doubler with an input frequency of 10 to 30 GHz and an output frequency of 20 to 60 GHz. It has very low conversion loss and provides excellent suppression with 37 dBc fundamental and 40 dBc 3F suppression values. This multiplier provides an output power of -6 dBm with a nominal +5 dBm input.
 
Download Datasheet | Product Details
 
Horn Antenna
24 to 42 GHz Dual Polarized Choke Flange Feed Horn Antenna

Horn Antenna from SAGE Millimeter

The SAH-2434231060-358-S1-280-DP from SAGE Millimeter is a dual polarized, WR-28 choke flange feed horn antenna that operates from 24 to 42 GHz. The antenna provides a gain of 10 dBi and has a half power beamwidth of 60 degrees. It has an integrated orthomode transducer (OMT) that enables the antenna to separate a circular or elliptical polarized waveform into two linear, orthogonal waveforms or vice versa.
 
Download Datasheet | Product Details
 
Power Divider
32 Way Power Divider from 500 MHz to 2 GHz

Power Divider from MCLI

The PS32-67 is a 32 Way Power Divider that operates from 500 MHz to 2 GHz. The power divider can handle up to 20 watts of power, has an insertion loss of 3.2 dB and an isolation of 18 dB. It has an amplitude balance of 1 dB, a phase balance of 7 degrees and a VSWR of 1.9:1. The divider is available in a module with SMA Female connectors.
 
Download Datasheet | Product Details
 
Down Converter
100 kHz to 2.5 GHz RF Downconverter

Down Converter from SignalCore

The SC5310A is a triple-stage downconverter with an output frequency range from 100 kHz to 2.5 GHz. The device has a tuning resolution of 1 Hz and bandwidth of up to 40 MHz. It has been designed for radio and TV broadcasting, cable networks, and spectral monitoring applications. The downconverter has high signal-to-noise dynamic range and high spurious-free dynamic range.
 
Download Datasheet | Product Details
 
In Series RF Adapter
3.5mm NMD plug to 3.5mm jack In Series Adapter from DC to 34.5 GHz

In Series RF Adapter from Jyebao

The ADS-VNAPC3PC8 is a 3.5 mm NMD Plug to 3.5 mm Jack coaxial adapter that operates up to 34.5 GHz. It is matched to 50 ohms and has a VSWR of 1.2:1. This in-series adapter has a stainless stell body and a BeCu contact pin. NMD adapters are ruggedized test-port solutions used on test sets and network analyzers.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with new RF & Microwave products every week. Our newsletter consists of new and interesting products from the leading manufacturers in the industry.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]