1. everything RF
  2. RF Newsletters
more
PREV 28th Nov, 2018 NEXT

New RF & Microwave Products this Week

28 Nov, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 28 Nov, 2018
 
Sponsored by PCB Directory
 
 
 
New RF & Microwave Products this Week
RF Amplifier
GaAs, MMIC Wideband Power Amplifier from 50 to 95 GHz

RF Amplifier from Analog Devices

The ADPA7001 from ADI is a GaAs, MMIC, balanced medium power amplifier that operates from 50 GHz to 95 GHz with an integrated temperature compensated on-chip power detector. In the lower band of 50 GHz to 70 GHz, it provides 14.5 dB of gain, 25.5 dBm of OIP3, and 17 dBm of output power for 1 dB gain compression.
 
Download Datasheet | Product Details
 
RF Amplifier
800 W Solid State Power Amplifier from 1 to 6 GHz

RF Amplifier from Exodus Advanced Communications

The AMP2030-800 is a solid state GaN power amplifier that operates from 1 to 6 GHz. It provides a saturated output power of 800 watts with a gain of over 59 dB. This rack mount amplifier can be controlled via the front panel on the amplifier system. It is available in a rack mount unit that measures 24 x 56 x 36 inches with N & SC-type female connectors and weighs 200 kg.
 
Download Datasheet | Product Details
 
Tunable Filter
9 to 1000 MHz Tunable Band-Pass Filters

Tunable Filter from Lark Engineering

The TMC Series from LARK Engineering are tunable bandpass filters that operate from 9 to 1000 MHz with a bandwidth of 2.2% to 10%. These bandpass filters have an insertion loss of less than 6 dB and can handle up to 30 dBm of power. The filters have 8 bits parallel tuning control and a tuning speed of under 50 microseconds.
 
Download Datasheet | Product Details
 
RF Duplexer
897 to 943 MHz Ceramic Duplexer

RF Duplexer from Anatech Electronics

The AM897-943D1058 from Anatech is a Ceramic Duplexer with Band 1 from 880 to 915 MHz and Band 2 from 925 to 961 MHz. The Duplexer has an insertion loss of less than 3.8 dB and an isolation of over 50 dB. It can handle up to 3 watts of power and is available in a surface mount package that measures 42.9 x 22 x 9 mm.
 
Download Datasheet | Product Details
 
Band Pass Filter
Low Cost Custom RF Filter from 300 MHz to 2.4 GHz

Band Pass Filter from NuWaves Engineering

The µFILTER from NuWaves is a low-cost miniature RF filter designed to allow the end user the capability to select a custom filter (Bandpass, Highpass, Low-Pass, or Band-Reject). The custom band-pass filter can be fine tuned to have any frequency requirement from 300 MHz to 2.4 GHz with 3 dB bandwidth from 1% to 40%. The filter is available in a module with standard SMA connectors.
 
Download Datasheet | Product Details
 
Directional Coupler
10 dB Directional Coupler from 0.5 to 40 GHz

Directional Coupler from Mini Circuits

The ZCDC10-K5R44W+ from Mini-Circuits is a directional coupler that operates from 0.5 to 40 GHz. It has a coupling value of 10 dB, directivity of over 10 dB and an insertion loss of under 3 dB. The coupler can handle up to 15 watts of power. It is available in a module with 2.92 mm female connectors and is ideal for 5G, mobile, fixed satellite and lab use applications.
 
Download Datasheet | Product Details
 
RF & Microwave Circulator
20 W RF Circulator from 2.3 to 2.7 GHz

RF & Microwave Circulator from MECA

The CN-2.500-M03 from MECA is an RF Circulator that operates from 2.3 to 2.7 GHz. It has an insertion loss of below 0.4 dB and provides an isolation of over 20 dB. The isolator can handle up to 20 watts of average power and is available in a module with N-Type Female connectors.
 
Download Datasheet | Product Details
 
RF Switch
5-Port DP3T Switches from DC to 40 GHz

RF Switch from Charter Engineering

The B88 Series from Charter Engineering are 5-port DP3T switches that operate from DC to 40 GHz. They have an insertion loss of below 0.6 dB and an isolation of over 60 dB. These switches can handle an input power of up to 300 W CW and have a switching speed of up to 20 msec. They are available in a module with 2.92 mm female connectors. The switches have a failsafe, latching, or momentary configuration.
 
Download Datasheet | Product Details
 
RF Switch
SP6T Switch from DC to 18 GHz

RF Switch from Atlanta Micro

The AM6015 from Atlanta Micro is a SP6T switch that operates from DC to 18 GHz. It provides a flat frequency response and has a low insertion loss of under 2 dB with a high isolation of over 20 dB. The switch operates of a single positive supply voltage of 5 V. It is available in a 4 mm QFN package.
 
Download Datasheet | Product Details
 
Trending Content
RF Tapper
What is an RF Tapper?
An RF Tapper is a device used to split an input signal into two parts. The ratio in which the signals are split is called the Split Ratio - This usually varies from 1:2 to 1:10000 - Depending on the application and power level. In theory, RF signal tappers are very similar to directional couplers. Click here to learn more
 
 
 
Signal Generator
10 MHz to 40 GHz, Phase Coherent, Multi-Channel RF Synthesizers

Signal Generator from Holzworth Instrumentation

The HSX Series are broadband, phase coherent frequency sources that are available in five frequency configurations from 10 MHz to 3 GHz, 6 GHz, 12 GHz, 24 GHz and 40 GHz. They exhibit industry leading phase noise and spectral purity performance coupled with a highly accurate dynamic range of +20 dBm to -110 dBm.
 
Download Datasheet | Product Details
 
Termination
100 W BeO Flanged Termination from DC to 10 GHz

Termination from Barry Industries

The T50R0-100-39Y from Barry Industries is a BeO Flanged Termination that operates from DC to 10 GHz. It can handle up to 100 watts of power while operating over a temperature range of -55 to 150-degree Celcius. The chip is available with a standard impedance value of 50 ohms.
 
Download Datasheet | Product Details
 
RF Cable
Phase/Temperature Stable RF Cables Up to 40 GHz

RF Cable from ConductRF

The PFT series of Low Loss, Phase/Temperature stable RF cable assemblies operate up to 40 GHz. The cables are available in two diameters - the 0.086” diameter that facilitates greater flexibility and handling and the 0.141” diameter that exploits the same great performance but with almost half the loss.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-7370 from RF Electronics is a Standalone Portable RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. This fully portable design is equipped with caster wheels for ease of movement. It has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz. It has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
RF Test Set
5G Base Station Analyzer for Large-Scale Deployments

RF Test Set from Viavi Solutions

The CellAdvisor 5G from Viavi Solutions is a base station analyzer capable of validating and troubleshooting 5G radio access. This field-portable solution has a combination of real-time spectrum analysis and 5G beam analysis functions, as well as the ability to test fiber, coax, and air interfaces. It supports beamforming analysis, massive MIMO and carrier aggregation.
 
Download Datasheet | Product Details
 
GNSS Module
GPS/GNSS Module with Integrated Antenna

GNSS Module from OriginGPS

The ORG1518-R02 from Origin GPS is a miniature multi-channel GPS/GLONASS with SBAS, QZSS, and other regional overlay systems receiver that continuously tracks all satellites in view, providing real-time positioning data in industry's standard NMEA format. It provides superior sensitivity and outstanding performance, achieving rapid TTFF in less than one second, an accuracy of approximately two meters, and tracking sensitivity of -165 dBm.
 
Download Datasheet | Product Details
 
RF Module
Ultra-Low Power LoRa System-in-Package from 862 to 1020 MHz

RF Module from Microchip Technology

The ATSAMR34J16 is a highly integrated LoRa System-in-Package (SiP) with an ultra-low-power 32-bit microcontroller, sub-GHz RF LoRa transceiver and software stack. It uses the 32-bit ARM® Cortex®-M0+ processor and has 64 KB of Flash and 12 KB of SRAM (4 KB battery backed). The transceiver supports LoRa, FSK, MSK and GSK modulation and delivers up to 20 dBm TX power with an RX sensitivity down to -148 dBm.
 
Download Datasheet | Product Details
 
RF Module
Bluetooth 5 Low Energy Module for Beacon and Mesh Applications

RF Module from Panasonic Corporation

The PAN1762 from Panasonic is a Bluetooth 5.0 Low Energy RF Module based on the Toshiba TC35680 single-chip controller. The new Bluetooth 5.0 standard enables a higher data rate of 2 Mbps using the high-speed 2M PHY or a significantly longer range using the LE coded PHY at 500 kb/s or 125 kb/s.
 
Download Datasheet | Product Details
 
Antenna
Multi-Band Ceramic Antenna for Cellular and NB-IoT Applications

Antenna from Johanson Technology

The 0830AT54A2200 from Johanson Technology is a LTE multi-band ceramic antenna that operates from 700 to 960 MHz and from 1700 to 2690 MHz. The antenna provides a gain of up to 2 dBi and can handle up to 3 watts of power. It is available in a surface mount package and is ideal for cellular, IoT, CAT M1 and NB-IoT applications.
 
Download Datasheet | Product Details
 
Featured Interview
Interview with Luis Garcia from Erzia Technologies
Interview with Luis Garcia from Erzia Technologies
everything RF Interviewed Luis Garcia, CEO at Erzia Technologies. He founded Erzia in December 2002, with a vision to apply innovative concepts and technology available in at that time rising mobile phone industry, to the more conservative space industry. Click here to read the full Interview
 
 
 
Base Station Antenna
12-Port, 65 Degree Ultra Wide Band Base Station Sector Antenna

Base Station Antenna from Filtronic

The P6KHEU01-Vx-Px from Filtronic is a 12-Port, 65 Degree Ultra Wide Band Base Station Sector Antenna that operates from 694 to 960 MHz, 1425 to 2200 MHZ and 1695 to 2690 MHz. This antenna supports 2x2 MIMO on low band and 4x4 MIMO on high band. It provides a gain of up to 18 dBi and can handle an input power of up to 350 watts per port.
 
Download Datasheet | Product Details
 
Wireless Charging Receiver
WattUp RF-to-DC Wireless Power Receiver

Wireless Charging Receiver from Dialog Semiconductor

The DA2210 is an RF-to-DC wireless power receiver optimized for wireless charging applications, such as wearables, fitness trackers, hearables, hearing aids, asset trackers, and other battery-powered electronics. It has four RF-to-DC receiver paths, allowing connection of 1 to 4 antennas depending on the desired power and antenna area availability.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the latest RF & Microwave products. We scan hundereds of manufacturer websites every week to identify new and interesting products.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]