PREV 5th Dec, 2018 NEXT

New RF & Microwave Products this Week

5 Dec, 2018 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 5 Dec, 2018
 
Sponsored by Digi-Key
 
 
 
New Products this Week
Power Divider
4-Way Power Divider from DC to 55 GHz

Power Divider from RF-Lambda

The RFLT4WDC55G from RF-Lambda is a 4-Way Power Divider that operates from DC to 55 GHz. It has an insertion loss of under 16 dB and an isolation of 12 dB. The coaxial power divider can handle a forward power of up to 1 watt and a peak power of up to 10 watts. It is available in a module with 2.4 mm female connectors and is ideal for aerospace and military applications.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
0.010 to 15 GHz RF Frequency Synthesizers

Frequency Synthesizer from L3 Narda-MITEQ

The SLS2 series from L3 Narda-MITEQ are frequency synthesizers that operate from 0.01 to 15 GHz with a standard step size of 1 kHz. The synthesizers provide an output power of up to 13 dBm and a spurious suppression of 60 dBc. They require a supply voltage from 7 to 28 V DC and consumes less than 4 watts of power.
 
Download Datasheet | Product Details
 
RF Mixer
0.7 to 1.4 GHz High Linearity GaAs Mixer with Integrated LO Driver

RF Mixer from BeRex, Inc.

The BM831 from Berex is a High IIP3 GaAs MMIC Mixer with an RF/LO frequency from 0.7 to 1.4 GHz and IF Frequency from 50 to 210 MHz. This high linearity mixer has an integrated LO Amplifier that provides an LO driver from -2 to + 2 dBm. The mixer has an IIP3 of 31.7 dBm and a conversion loss of 8.8 dB. It requires a supply voltage from 3.3 to 5 V.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
27.9 dB, 5-Bit Digital Attenuator from DC to 18 GHz

RF Variable Attenuator from Vectrawave

The VWA5000055AA from Vectrawave is a 5-bit Digital Attenuator that operates from DC to 18 GHz. It provides an attenuation range from 0 to 27.9 dB with a LSB of 0.9 dB. The digital control logic allows for parallel data input, so attenuation value can be changed instantaneously.
 
Download Datasheet | Product Details
 
Termination
10 W Low PIM Terminations from 0.380 to 6 GHz

Termination from MECA

The LPT10-4310M-M01 from MECA are Low PIM Terminations that operate from 0.38 to 6 GHz. These terminations are matched to 50 ohms and can handle an average power up to 10 watts and peak power up to 5 KW. These low PIM terminations have PIM values as low as -170 dBc. They are available with a 4.3/10 male 7/16 DIN connector interfaces.
 
Download Datasheet | Product Details
 
Front End Module
37/39 GHz Silicon 5G Tx Quad Core IC

Front End Module from Anokiwave

The AWMF-0144 is a highly integrated silicon quad-core Tx IC intended for 5G phased array applications. It supports four radiating elements, includes 5-bit phase control and 5-bit gain control for analog RF beam steering. The IC provides +12 dBm output power and includes gain compensation over temperature, temperature reporting, Tx power telemetry, and fast beam switching using on-chip beam weight storage registers.
 
Download Datasheet | Product Details
 
Sponsored by Digi-Key
RSL10 from ON Semiconductor
RSL10 Bluetooth Low Energy System-in-Package (SiP) from ON Semiconductor
The RSL10 SiP provides a highly integrated, single chip solution with extremely low power consumption of 62.5 nW in deep sleep mode and 7 mW Rx in receive mode. The device provides a complete Bluetooth solution by integrating an RSL10 radio SoC, antenna, filtering, power management, and passive components. Click here to learn more.
 
 
 
Front End Module
LTE Multi-Band Front End Module for IoT Applications

Front End Module from Skyworks Solutions

The SKY68020-11 from Skyworks is Front-end Solution for IoT Applications. This hybrid multi-band, multi-chip module supports LTE-M / NB-IoT transceiver systems. The module contains the entire RF Front End required for an LTE multi-band radio operating at low-band and mid-band frequencies. It includes Rx-low pass filters, broadband PA with a bias controller, Tx low-pass harmonic filter, antenna switch and MIPI RFFE controller.
 
Download Datasheet | Product Details
 
RF Transceiver
Low Power Sub-GHz RF Transceiver

RF Transceiver from Semtech

The SX1231H is a highly integrated RF transceiver that operates over a wide frequency range, covering the 433, 868 and 915 MHz license-free ISM frequency bands. This low power transceiver has an integrated 20 dBm power amplifier on the chip. It has a Rx sensitivity down to -120 dBm at 1.2 kbps and is optimized for low power consumption while offering high RF output power and channelized operation.
 
Download Datasheet | Product Details
 
Cellular Module
Globally Configurable Module for NB-IoT and 5G

Cellular Module from u-blox AG

The SARA-N310 is a multi-band NB-IoT module that supports the preliminary set of 3GPP Release 14 features (LTE Cat NB2). This module will be able to receive additional features and ultimately become Release 14 and 5G compliant via subsequent firmware upgrades. The SARA-N310 provides a comprehensive set of features and protocols that NB-IoT-based applications will benefit from, including TCP, HTTPS, CoAP, DTLS, and MQTT.
 
Download Datasheet | Product Details
 
RF Module
Long Range Bluetooth 5.0 / THREAD / ANT+ / NFC Module with MCU and Antenna

RF Module from Insight SiP

The ISP1807 is a miniature Bluetooth LE Module from Insight SIP that is based on the nRF52840 chip from Nordic Semiconductor. It offers a Bluetooth 5 stack including long range, high throughput, advertising extensions and improved coexistence, in addition with IPv6 connectivity, Mesh capabilities, and thus can form the hub of IOT (Internet of Things) solutions.
 
Download Datasheet | Product Details
 
RF Amplifier
8,000 W Pulsed Amplifier System from 1 to 2 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 8000SP1G2 is a self-contained, forced air cooled, broadband solid-state microwave amplifier system. This amplifier system operates from 1 to 2 GHz and provides pulsed power over 8,000 Watts. It provides readily available pulsed RF power for a variety of applications in Test and Measurement, Industrial and University Research and Development, and Service applications.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Noise Amplifier from 1 to 3 GHz

RF Amplifier from NuWaves Engineering

The HILNA LS from NuWaves is a Low Noise Amplifier that operates from 1000 to 3000 MHz. The LNA covers the L and S Bands and delivers 50 dB of gain with a noise figure of 2 dB and an OIP3 of 33 dBm. It has a robust power supply that enables it to operate over a very broad range, easily allowing the unit to be integrated into systems without regard to power supply precision.
 
Download Datasheet | Product Details
 
Sponsored by Digi-Key
 
 
 
RF Amplifier
9 W GaAs MMIC Power Amplifier from 8.5 to 11 GHz

RF Amplifier from VIPER RF

The VRFA0043V2-BD from Viper RF is a X-Band GaAs MMIC Power Amplifier that operates from 8.5 to 11 GHz. The amplifier delivers a gain of 21 dB and a saturated output power of 39.5 dBm with an efficiency of 45%. The RF ports are DC blocked and matched to 50 ohms. This amplifier can be used in a wide range of applications including point to point radios, VSAT, radar and test & instrumentation.
 
Download Datasheet | Product Details
 
RF Amplifier
2 W GaN Amplifier from 2 to 20 GHz

RF Amplifier from Qorvo

The QPA2213 from Qorvo is a wideband GaN driver amplifier that operates from 2 to 20 GHz. This amplifier delivers 34 dBm of saturated output power and 25 dB of gain while achieving 25% power added efficiency. The module is available in a 4.5 x 4.5 x 1.74 mm laminate package and is ideal for both commercial and military-wide band or narrowband systems.
 
Download Datasheet | Product Details
 
RF Amplifier
50 W GaN Power Amplifier from 6 to 18 GHz

RF Amplifier from KeyLink Microwave

The KB60180M47A from KeyLink Microwave is a multi-octave high power amplifier that operates from 6 to 18 GHz. This GaN amplifier provides a saturated output power of 50 watts with a gain of 50 dB. It is available in a module that measures 180 x 120 x 22 mm with SMA female connectors and is ideal for for jamming, EMC, test and measurement applications.
 
Download Datasheet | Product Details
 
RF Amplifier
50 W GaN Power Amplifier Module for UAV Data Links from 2 to 6 GHz

RF Amplifier from Comtech PST

The BME2969-50DL from Comtech PST is a Power Amplifier Module for UAV data link applications from 2 to 6 GHz (2.2-2.5 & 4.4-5.85 GHz). This GaN based amplifier for the C & S Band provides an output power of 50 Watts (60 watts saturated) and can accept an input RF power of -6 dBm (20 dBm max). It requires a 28 V DC Voltage and consumes up to 250 watts of power.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure for Applications up to 75 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-2260 from RF Electronics is a RF Shielded Test Enclosure that can be used to test devices that operate up to 75 GHz. It has a thick RF absorbing foam that provides a reflection loss of over 23 dB at 60 GHz. The test enclosure has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
Antenna
3-in-1 External Antenna for 4G/Wi-Fi/GPS

Antenna from MOLEX

The 206866-3000 from Molex is a 3-in-1 (4G/Wi-Fi/GPS) External Antenna ideal for telematics, remote monitoring, tracking and other wireless applications. This fully balanced, dipole and IP66-rated antenna is available in a circular housing that measures 77 mm (diameter width) x 15 mm (tall). This solution has three cords (3m length) with FAKRA connectors so that the antenna can link to multiple radio device applications at once.
 
Download Datasheet | Product Details
 
Antenna
2.4/5 GHz Bluetooth/Wi-Fi Tape Mount Antenna

Antenna from PCTEL

The WV-COVDB2458 is a 2.4/5 GHz Bluetooth/Wi-Fi tape mount antenna (i.e it can be stuck on to a surface using a tape) that can be used for both covert public safety and industrial IoT applications. It provides a gain of up to 6 dBi and can handle an input power of less than 10 watts. This overmolded indoor/outdoor rated antenna can be tape mounted almost anywhere, including vehicle windows, factory floors, officer vests, backpacks, and utility cabinets.
 
Download Datasheet | Product Details
 
RFID Tag
UHF RFID Tag for Commercial and Industrial Textile Applications

RFID Tag from Fujitsu

The WT-A533 from Fujitsu is an ISO/IEC 18000-63 (EPC Gen2) RFID Tag for commercial and industrial textile applications. It has a reading distance of 8 feet and is suitable for high-pressure extractors up to 60 bar and for Autoclave sterilization. This flexible UHF RFID tag has 100% non-magnetic construction and is also suitable for hospital use.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the latest RF & Microwave product releases. Use the parametric search tool to find products from the leading manufacturers based on your requirement.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]