1. everything RF
  2. RF Newsletters
more
PREV 19th Dec, 2018 NEXT

New RF & Microwave Products this Week

19 Dec, 2018 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 19 Dec, 2018
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
RF Test Set
Base Station Analyzer from 9 kHz to 8 GHz

RF Test Set from Viavi Solutions

The VIAVI CellAdvisor JD786B Base Station Analyzer that combines the functionality of spectrum analysis, cable and antenna analysis, and power measurements into a single device. The spectrum analyzer operates up to 8 GHz, cable and antenna analyzer up to 6 GHz and the power meter up to 8 GHz.
 
Download Datasheet | Product Details
 
Signal Generator
Multi-Channel Signal Generator from 9 kHz to 3 GHz

Signal Generator from IZT

The IZT S1010 from IZT is an advanced Digital Signal Generator that operates from 9 kHz to 3 GHz with an instantaneous bandwidth of up to 120 MHz. It has 31 virtual signal generators in one device. This compact multi-channel platform can simultaneously simulate a test environment with multiple sources and can stream multiple signals in parallel with a cumulative bandwidth of up to 320 MS/s.
 
Download Datasheet | Product Details
 
PLDRO
Phase Locked DRO from 1 to 40 GHz

PLDRO from Microwave Dynamics

The PLO-5000 Series is a family of Phase Locked DRO’s that can operate at a single frequency from 1 to 40 GHz. The PLO-5000 series is internally referenced locked and factory tuned to a specified frequency, however has a mechanical tuning range of 100 MHz. These PLDROs provide an output power of up to 25 dBm while operating over a supply of 12 V or 15 V @200 mA.
 
Download Datasheet | Product Details
 
Waveguide Circulator
Ku-Band WR75 High Power Waveguide Circulators

Waveguide Circulator from Smiths Interconnect

The SpaceNXT Ku Series from Smiths Interconnect is a family of high power WR75 circulators operating from 10.70 to 12.75 GHz. The Series is specifically designed for MEO/GEO satellites and offered with recognized testing sequences in order to reduce delivery times and overall cost of ownership. The devices demonstrate low and stable insertion loss characteristics under maximum power.
 
Download Datasheet | Product Details
 
RF Amplifier
2.025 to 2.40 GHz LNAs for Earth Station Receiver Applications

RF Amplifier from Advantech Wireless

The ALNA-S Series of Low Noise Amplifiers operate from 2.025 to 2.400 GHz in the S-band. These low noise, high dynamic range amplifiers are suitable for use in satellite earth station receiver applications where ultra-low noise and high reliability are critical. The LNAs provide a gain of over 50 dB with an output power of more than 10 dBm and Noise Temperature ranging from 50° K to 70° K.
 
Download Datasheet | Product Details
 
Phase Noise Analyzer
10 MHz to 26 GHz Real-Time Phase Noise Analyzer

Phase Noise Analyzer from Holzworth Instrumentation

The HA7062D from Holzworth is a real time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It provides measurement offsets from 0.1 Hz to 100 MHz. The HA7062D has a high speed digital processor for speed, but the proven accuracy and speed starts with the analog front end. A key component of the analog front end is a pair of Holzworth HSX Series RF Synthesizers as the test system’s internal LOs.
 
Download Datasheet | Product Details
 
RF Amplifier
65 to 115 GHz Cryogenic Low Noise Amplifier

RF Amplifier from Low Noise Factory

The LNF-LNC65_115WB is a Cryogenic Low Noise Amplifier that operates from 65 to 115 GHz. It provides a gain of 23 dB with a noise figure of 0.4 dB. The LNA is available in a waveguide module that measures 14.92 x 23 x 19.20 mm with standard WR10 and Nano-D Interface.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Mouser
Mouser Supplies Modules that Deliver Simple Path to Integrating Mesh Technology.
Digi XBee3™ Zigbee RF modules are fully integrated, certified and ready to connect wireless mesh networks. At 13mm x 19mm, they are ideal for short-range and LPWAN applications needing small, efficient design and control logic at the endpoint, plus compatible with ZigBee, Thread, 802.15.4, DigiMesh, Wi-Fi® and Bluetooth®. Click here to learn more.
 
 
 
RF Amplifier
Cryogenic Amplifier from 1 to 500 MHz

RF Amplifier from AmpliTech

The APTC3-1M500M-1000-D6-V from AmpliTech is a Cryogenic Amplifier that operates from 1 to 500 MHz. It provides an output power of 0 dBm and gain of 20 dB with a noise figure of 1 dB. The amplifier requires a supply of 10 Vdc while consuming 31 mA of current. It is available in a drop-in package with SMA female connectors.
 
Download Datasheet | Product Details
 
Antenna
GSM, UMTS, LTE Antenna Booster for Wireless Devices

Antenna from Fractus Antennas

The FR01-S4-232 from Fractus Antennas is a multiband antenna booster that operates in the GSM, UMTS and LTE Bands (698 - 798 MHz, 824 - 960 MHz and 1710 - 2690 MHz). It delivers a gain of up to 2.9 dBi with an efficiency of more than 50%. This linearly polarized device is built on a glass epoxy substrate measuring 10 x 3.2 x 3.2 mm and is ideal for wireless devices (mobile phones).
 
Download Datasheet | Product Details
 
Antenna
Ultra Low-profile DAS Antenna for Public Safety Applications

Antenna from Laird Technologies

The CFSA35606P is a low PIM, ceiling mounted omni-directional antenna optimized for indoor DAS coverage from 350 to 6000 MHz. It covers the 350-520, 600-960, 1350-1550, and 1690-6000 MHz bands for the UHF, 4G LTE, 2G/3G Cellular, UMTS/AWS-3, CBRS, and Wi-Fi applications. The antenna provides a gain of up to 7.3 dBi and can handle an input power of up to 50 watts.
 
Download Datasheet | Product Details
 
Front End Module
860 to 930 MHz RF Front-End Module for LPWAN Applications

Front End Module from Skyworks Solutions

The SKY66421-11 from Skyworks is a highly integrated RF front-end module that supports LoRa, SigFox and other unlicensed band technologies, while operating from 860 to 930 MHz frequency range. It is fully matched 50 Ohm TX and RX inputs and antenna outputs, and has digital controls that are compatible with 1.6 to 3.6 V CMOS levels.
 
Download Datasheet | Product Details
 
Power Divider
380 to 960 MHz Wilkinson Power Dividers for FirstNet Applications

Power Divider from Broadwave Technologies

The 152-305-XXX is a series of 50 Ohm Wilkinson Power Dividers designed for First Responder Network Authority (FirstNet) applications. The power dividers are available in 2, 3, 4 and 8 way configurations operating from 380 to 960 MHz. They have an isolation of 25 dB, insertion loss of under 1 dB and can handle an input power of up to 5 watts.
 
Product Details
 
90 Degree Hybrid Coupler
90 degree Hybrid Coupler from 0.7 to 4 GHz

90 Degree Hybrid Coupler from RN2 Technologies

The CMXW25A03 from RN2 Technologies is a 90 degree hybrid coupler that operates from 0.7 to 4 GHz. It has an insertion loss of under 0.85 dB, an isolation of over 11 dB and can handle an input power of up to 200 watts. The coupler has an amplitude balance of below ± 0.8 dB and a phase balance of 90±10 degrees. It is available in a surface mount package.
 
Download Datasheet | Product Details
 
Switch Matrix
Switch Matrix from 746 to 5925 MHz for 5G Testing

Switch Matrix from Renaissance Electronics Corporation

The 18A6BAX from Renaissance Electronics is a Switch Matrix designed for Sub-6 GHz 5G testing. It gives users the flexibility to select and combine up to 5 FDD and 2 TDD frequency bands to a common UL port. The switch matrix can handle up to 30 dBm of power, has an insertion loss of below 25 dB and an isolation of over 60 dB.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
 
 
 
Band Stop Filter
900 to 1100 MHz Notch Filter for EW System Applications

Band Stop Filter from Aelius Semiconductors

The NF102DL1 from Aelius is a notch filter with a notch (stopband) frequency from 900 to 1100 MHz and passbands from 500-800 & 1300-2200 MHz. This filter is capable of rejecting cellular interference signals with high rejection and provides a low insertion loss for EW system applications that operate in the passband.
 
Download Datasheet | Product Details
 
RF Amplifier
60 W Bi-Directional Amplifier from 2.2 to 2.5 GHz

RF Amplifier from Triad RF Systems

The TTRM1123 is a high power bi-directional amplifier (BDA) that operates from 2200 to 2500 MHz providing over 60W of linear power in the S-Band. In transmit mode, the amplifier provides 28 dB of small signal gain and can produce over 10 W of 64 QAM OFDM power across the band. In receive mode, the unit provides 11 dB of small signal gain with a noise figure of 2 dB.
 
Product Details
 
RF Cable
Low Loss, Phase Stable Flexible Cables Operating up to 40 GHz

RF Cable from Electro-Photonics LLC

The LL100 Series from Eletro-Photonics are low loss and phase stable flexible cables that operate up to 40 GHz. These cables have good return loss, insertion loss and amplitude stability. The 50 ohm cables are available in custom lengths with various connector options.
 
Download Datasheet | Product Details
 
Cellular Module
Low Power Module with Integrated LTE-M/NB-IoT Modem and GPS

Cellular Module from Nordic Semiconductor

The nRF9160 is a low power System-in-Package with integrated LTE-M/NB-IoT modem and GPS. The module has 1 MB of Flash plus 256 kB of RAM on-board memory with a broad range peripheral set, analog and digital interfaces, 32 GPIOs, a stand-alone modem with full LTE capability, plus a multiband RF front-end.
 
Download Datasheet | Product Details
 
RFID Reader Module
Programmable OEM RFID Module with NFC Support

RFID Reader Module from Elatec

The TWN4 MultiTech Nano LEGIC 42 is a Programmable OEM RFID module with NFC support. It allows users to read and write to almost any 125 kHz, 134.2 kHz, and 13.56 MHz tag and/or label, supporting all major transponders from various suppliers like ATMEL, EM, ST, NXP, TI, HID, LEGIC, etc. and ISO standards like ISO14443A/B (T=CL), ISO15693, ISO18092 / ECMA-340 (NFC).
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the latest RF & Microwave products. Our parametric search tool enables engineers to find products based on their requirement from over 1000 of the leading manufacturers.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]