1. everything RF
  2. RF Newsletters
more
PREV 23rd Jan, 2019 NEXT

New RF & Microwave Products this Week

23 Jan, 2019 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 23 Jan, 2019
 
Fill 1 Form and Get Multiple Quotes!
 
 
 
New RF & Microwave Products this Week
RF Amplifier
4 W Ka-Band Power Amplifier from 27.5 to 30 GHz

RF Amplifier from MACOM

The MAAP-011250 from MACOM is a Ka-band power amplifier that operates from 27.5 to 30 GHz. The amplifier provides an output power of 4 watts. It is available in a 5 x 5 mm QFN package and is ideally suited for MILCOM applications.
 
Download Datasheet | Product Details
 
RF Amplifier
5 W GaN Power Amplifier Module from 0.1 to 10 GHz

RF Amplifier from AMCOM Communications

The AM00110037SF-2H from Amcom is a GaN Power Amplifier module that operates from 0.1 to 10 GHz. It delivers 5 watts of CW output power and 27 dB of small signal gain. This amplifier module is available in a compact and lightweight package that measures 4 x 3.2 x 1.25 inches with SMA female connectors. It is ideal for radar, microwave backhaul, instrumentation and measurement applications.
 
Download Datasheet | Product Details
 
RF Amplifier
300 W Solid State GaN Power Amplifier from 2 to 6 GHz

RF Amplifier from Aethercomm

The SSPA 2.0-6.0-250 is a solid state GaN power amplifier that operates from 2 to 6 GHz. It provides a nominal output power of 250 watts and a saturated power of 300 watts with a small signal gain of 70 dB. This broadband GaN SSPA is designed to be employed in systems where high power and medium efficiency and linearity are required across a large bandwidth.
 
Download Datasheet | Product Details
 
RF Amplifier
800 W Solid State Power Amplifier from 1 to 6 GHz

RF Amplifier from Exodus Advanced Communications

The AMP2030-800 is a solid state GaN power amplifier that operates from 1 to 6 GHz. It provides a saturated output power of 800 watts with a gain of over 59 dB. This rack mount amplifier can be controlled via the front panel on the amplifier system. It is available in a rack mount unit that measures 24 x 56 x 36 inches with N & SC-type female connectors and weighs 200 kg.
 
Download Datasheet | Product Details
 
RF Transistor
500 W LDMOS Transistor for RF Energy Applications

RF Transistor from Ampleon

The BLC2425M10LS500P from Ampleon is a 500 Watt LDMOS power amplifier transistor for RF energy applications that operates from 2400 to 2500 MHz. It provides up to 500 watts of power with an efficiency of up to 67%. This rugged device is capable of withstanding a load mismatch of up to VSWR 20:1. It has integrated ESD protection and internal input/output matching.
 
Download Datasheet | Product Details
 
Power Divider
3-Way Power Divider from 350 to 1000 MHz

Power Divider from INSTOCK Wireless Components

The PD2430 is a 3-Way power divider/combiner that operates from 350 to 1000 MHz. This Wilkinson power divider passes DC current to all ports making it ideal for use in active systems. It has an insertion loss of less than 1 dB, isolation of over 18 dB and a VSWR of 1.35:1. The divider has an amplitude balance of 0.3 dB and phase balance of less than 4 degrees. It is available in a module with SMA connectors.
 
Download Datasheet | Product Details
 
RF & Microwave Circulator
Surface Mount Circulator from 9.3 to 9.5 GHz

RF & Microwave Circulator from Renaissance Electronics Corporation

The 3SMH8NFL from Renaissance Electronics Corporation is a surface mount circulator that operates from 9.3 to 9.5 GHz in the X-band. It provides an isolation of 20 dB and an insertion loss of 0.6 dB. The isolator can handle a power of up to 10 watts and has a VSWR of 1.25:1. It is available in a surface mount package that measures 0.35 x 0.457 inches and is ideal for high-rel radar and radio applications.
 
Download Datasheet | Product Details
 
Fixed Attenuator
20 dB RF Coaxial Attenuator from DC to 18 GHz

Fixed Attenuator from Hytem

The 03.02.620 from Hytem is a RF Coaxial Attenuator that operates from DC to 18 GHz. This 20 dB attenuator can handle an input power of up to 100 watts. It is available with SMA male/female connectors.
 
Download Datasheet | Product Details
 
RF Switch
SP8T Pin Diode Absorptive Switch from 2 to 18 GHz

RF Switch from UMCC

The SR-S010-8S from UMCC is an absorptive SP8T PIN-switch that operates from 2 to 18 GHz. It can handle an input power of up to 27 dBm, has an insertion loss of less than 3.9 dB, an isolation of more than 60 dB and switching speed of 80 ns. The switch requires a supply voltage of -12 / +5 V while consuming up to 260 mA of current. It is available in a module with SMA female connectors.
 
Download Datasheet | Product Details
 
Laminate
PTFE Laminates for Automotive Radar Sensors up to 77 GHz

Laminate from Rogers Corporation

The RO3003G2 from Rogers Corporation are high-frequency ceramic-filled PTFE laminates designed for next generation mm-Wave automotive radar applications. Operating up to 77 GHz, they provide a Dk of 3.00 @ 10 GHz (clamped stripline method) & 3.07 @ 77 GHz (microstrip differential phase length method).
 
Download Datasheet | Product Details
 
Antenna Alignment Tool
Antenna Alignment Tool with Android Tablet

Antenna Alignment Tool from Sunsight Instruments

The AAT30C from Sunsight is an Antenna Alignment Tool with an accuracy of 0.3 degrees RMS in azimuth and 0.1 degrees in Tilt and Roll. This Alignment Tool is the ideal product for traditional RF panel antenna alignment. It measures antenna alignment in azimuth, latitude/longitude, tilt, roll (plumb), MSL height, and AGL height (with laser rangefinder option).
 
Product Details
 
Signal Generator
USB RF Signal Generator from 34.4 MHz to 4.4 GHz

Signal Generator from Windfreak Technologies

The SynthUSBII from Windfreak is a software tunable RF signal generator that operates from 34.4 MHz to 4.4 GHz. This device also has nonvolatile on board memory so it can be programmed to fire up by itself on any frequency, power, sweep or modulation setting. RF power is controlled by two bits in the PLL chip and there is a total of 10 dB of output power adjustment in 4 steps.
 
Download Datasheet | Product Details
 
Signal Generator
10 MHz to 40 GHz, Phase Coherent, Multi-Channel RF Synthesizers

Signal Generator from Holzworth Instrumentation

The HSX Series are broadband, phase coherent frequency sources that are available in five frequency configurations from 10 MHz to 3 GHz, 6 GHz, 12 GHz, 24 GHz and 40 GHz. They exhibit industry leading phase noise and spectral purity performance coupled with a highly accurate dynamic range of +20 dBm to -110 dBm.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
High-End VNAs from 10 MHz to 26.5/43.5 GHz

Vector Network Analyzer from Rohde & Schwarz

The R&S ZNA series of 2/4 ports high-end vector network analyzers operate from 10 MHz to 26.5/43.5 GHz (R&S ZNA26/43). These VNAs are a powerful, universal test platform for characterizing active and passive DUTs. They provide an outstanding dynamic range of 146 dB and a trace noise as low as 0.001 dB at 1 kHz IF bandwidth.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
8.5 GHz VNA with Metrology-Grade Performance

Vector Network Analyzer from Copper Mountain Technologies

The M5090 from Copper Mountain Technologies is a 2-port, 8.5 GHz Vector Network Analyzer that delivers metrology-grade performance. This computer-controlled VNA has a dynamic range of 130 dB, a measurement speed of 70 µs and can be used to measure all four S parameters (S11, S21, S12, S22). The ports are matched to 50 ohms.
 
Download Datasheet | Product Details
 
DLVA
2 to 18 GHz DLVA with 45 dB Dynamic Range

DLVA from Akon Inc

The A15-ML055 from Akon is a Detector Log Video Amplifier (DLVA) that operates from 2 to 18 GHz. It has a dynamic range of 45 dB and Tangential Signal Sensitivity (TSS) of -42 dBm. This DLVA has an excellent log slope variation and has fast rise and fall times of 20 nS and 150 nS. It is available in a ruggedized package that measures 2.5 x 1.5 x 0.44 inches and is ideal for Military, Space and Industrial applications.
 
Download Datasheet | Product Details
 
RF Module
Dual Band 2.4/5GHz WiFi + Bluetooth Combo Module

RF Module from Compex Systems

The WLT674 from Compex Systems is a Dual Band Wi-Fi (2.4/5 GHz) and Bluetooth Low Energy module. It is based on Qualcomm Atheros QCA6174A-5 chipset and supports 2x2 MIMO with two spatial streams. It also supports BT-WLAN coexistence and ISM-LTE coexistence. The module requires a 3.3V DC power supply and measures 22 x 30 x 3 mm.
 
Download Datasheet | Product Details
 
Cellular Module
Multi-band NB-IoT Module with Ultra-low Power Consumption

Cellular Module from Quectel

The BC95-G from Quectel is an NB-IoT module that supports multiple frequency bands of B1/B3/B8/B5/B20/B28 with extremely low power consumption. The ultra-compact module is based on the Qualcomm 9205 LTE IoT modem and is compatible with Quectel GSM/GPRS M95 module. It provides a flexible and scalable platform for migrating from GSM/GPRS to NB-IoT networks.
 
Download Datasheet | Product Details
 
Antenna
2.4/5 GHz Chip Antenna for Automotive Applications

Antenna from INPAQ

The VGAP-CLB-AS-A1 from INPAQ is a 2.4/5 GHz automotive chip antenna that delivers a gain of up to 3.5 dBi with an efficiency of 81 %. The antenna is available in a surface mount package that measures 5.2 x 3.7 x 0.7 mm and is ideal for 5G automotive applications.
 
Download Datasheet | Product Details
 
RFID Antenna
Circular Polarized UHF RFID Antenna from 900 to 930 MHz

RFID Antenna from Identix

The ANT85C7070 from Identix is a Circular Polarized Far Field UHF RFID antenna that operates from 900 to 930 MHz. It has a high gain of 8.5 dBiC, low axial ratio of 0.6 dB at 915 MHz and a front to back ratio of 17 dB. The antenna can handle an input power of up to 20 watts and has a VSWR of lower than 1.4:1. It measures 7.7 x 7.7 x 0.55 inches and is available with an SMA female connector.
 
Download Datasheet | Product Details
 
Horn Antenna
Horn Antenna from 2 to 4 GHz with 15 dBi Gain

Horn Antenna from AH Systems Inc

The SAS-590-11 from AH Systems is an octave band horn antenna that operates from 2 to 4 GHz. This antenna provides a gain of up to 15 dBi and can handle up to 300 watts of avg. power and 3K watts of peak power. It has a WR-320 to N-Type female adapter at the connection interface and is matched to 50 ohms. The antenna has a low VSWR of 1.5:1 and is excellent for both immunity and emissions testing. It has been pre-calibrated up to 1 meter.
 
Download Datasheet | Product Details
 
Fill 1 Form and Get Multiple Quotes!
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide users with the latest news, information on new product releases, upcoming events and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]