|
 New RF & Microwave Products this Week |
|
|  | Dual Directional Coupler from Werbel Microwave Model 40C22 is a dual directional coupler from Werbel Microwave that operates from 80 to 1000 MHz. It has a coupling of 40 dB, directivity of 20 dB and can handle up to 200 watts of power. The coupler has an insertion loss of 0.25 dB and is available in a module with N Type female connectors. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Aethercomm The SSPA 0.1-1.0-300 is a high power Gallium Nitride (GaN) Amplifier that operates from 100 MHz to 1000 MHz. It has a large signal gain of 50-54 dB and provides saturated power from 250-300 watts. This PA is ideal for broadband military, commercial and Satcom applications that require a broad bandwidth. It requires a supply voltage of 18 to 36 V and is packaged in a connectorized module with TNC Female connectors. Download Datasheet | Product Details
|
| | |
|
|  | GPS/GNSS Antenna from Allis Communications The AM460 is an omni-directional MIMO Antenna for GPS, Iridium, 2G, 3G, 4G and WiFi applications. It operates in a number of frequency bands from 696 MHz to 5.9 GHz. The antenna has its own ground plane and can radiate on any mounting environment like metal or plastic without effecting performance. It is an IP67 waterproof antenna which is resistant to harsh outdoor environments. It is ideal for use in trains, busses and transport applications. Download Datasheet | Product Details
|
| | |
|
|  | Omni-Directional Antenna from Laird Technologies The Ultra Phantom is a small high-performance omnidirectional low profile UHF antenna designed for use in government, public safety and industrial/commercial market segments. It operates from 380 to 512 MHz, with a gain of 2.0 to 4.1 dBi to boost power output and improve signal reception. The antenna is IP67 certified to protect against dust and water exposure ensuring it can operate in the most challenging environments. Download Datasheet | Product Details
|
| | |
|
|  | Limiter from Triquint The TGL2205-SM from TriQuint is a high power VPIN limiter capable of protecting sensitive receive channel components against high power incident on circuits. It has been design to operate from 2 to 6 GHz with an insertion loss of less than 0.6 dB. It can handle up to 100 W of peak pulsed power and has a flat leakage of 16.5 dBm. The TGL2205-SM does not require DC bias and is available in a compact 4 x 4 mm QFN package. The die has a protective surface passivation layer that provides enhanced environmental robustness making it well suited for both military and commercial applications. Download Datasheet | Product Details
|
| | |
|
|  | Balun from MACOM This series of Baluns/Transformers from MACOM operate from 5 to 1700 MHz. The devices are available as surface mount and are ideal for real estate constrained customers. They have excellent temperature stability and broadband performance. The baluns offer high current handling in a small outline package with less than 3.8 x 3.8 mm in size on average. They are available on Tape and Reel and can be assembled using surface mount capability. Download Datasheet | Product Details
|
| | |
|
|
|  | RF Mixer from Marki Microwave The MLIQ-0416 is a multi octave IQ mixer that opeates from 4 to 16 GHz. It consist of a double balanced mixer connected with an integrated LO hybrid and power divider. It is ideal for communications or radar systems with advanced digital modulation formats and phase modulated signals, test and measurement, or electronic warfare. Image reject or single sideband modulation is possible with use of an external IF quadrature (90°) hybrid. This mixer is available in a compact chip styled package which measures 0.370” x 0.160”x0.010” or a connectorized module Download Datasheet | Product Details
|
| | |
|
|  | RF Switch from Planar Monolithics Industries The SWN-2181-TRA from PMI is a pin diode transfer switch which operates from 0.5 to 18.0 GHz. It has 60dB min of isolation, an insertion loss below 3.5dB and can handle up to 10 dBm CW power. This switch incorporates a TTL compatible driver for easy system integration. It is available with removable 2.92mm (Female) connectors in a housing that measures 1.0" x 1.0" x 0.25". Download Datasheet | Product Details
|
| | |
|
|  | Band Pass Filter from KR Electronics Inc The 3154 is a Bandpass filter from KR Electronics with a centre frequency of 1325 MHz. It has a 750 MHz 2 dB bandwidth with a selective elliptic response. It has a low insertion loss of less than 1.5 dB and rejection of over 20 dB. The filter is available in a surface mount package and is matched to 50 ohms at the source and load. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from RFHIC The RTH23007-10 is a GaN (Gallium Nitride) Doherty Hybrid Amplifier that operates from 2300 to 2400 MHz. The amplifier has been developed for 4G/LTE small cell base stations. It has a high efficiency of 43% and can provide an output power of 7W over the frequency range of operation. Integrated with Asymmetrical Doherty configurations, RTH Series is packaged in a very small form-factor 28 x 19 x 4.8 mm on AIN (aluminum nitride) board which provides excellent thermal dissipation. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from MACOM The MAAL-011078 is a Low Noise Amplifier from MACOM that operates from 700 MHz to 6 GHz. It has a gain of over 22 dB and a noise figure of less than 0.5 dB at 2.6 GHz. The LNA requires a supply voltage of 3 V or 5 V. The bias current is set by an external resistor, so the user can customize the power consumption to fit the application. It is ideal for wireless infrastructure, WiFi, L Band and S Band applications. The MAAL-011078 is available in a compact 2 mm PDFN package. Download Datasheet | Product Details
|
| | |
|
|  | Coaxial Termination from Aeroflex - Inmet The 8530N is a DC Blocking (Inner) Termination from Aeroflex / Inmet that operates from 30 kHz to 18 GHz. It has a VSWR of 1.35:1 and has a voltage rating of 100 V. The termination has an N Type Male connector that is matched to 50 Ohms. It can operate from 10 to 85 Degrees C. Download Datasheet | Product Details
|
| | |
|
|  | OCXO from Fox Electronics The FTP301AH is an Oven Controlled Crystal Oscillator (OCXO) which operates from 5 to 40 MHz. It has an HCMOS output and requires a 3.3 V supply. The OCXO has a low phase noise and an output load of 15 pF with 100 PPB frequency stability. It is available in a compact SMT package. Download Datasheet | Product Details
|
| | |
|
|  | XO from Fox Electronics The HC49SDLF is a resistance weld SMD Crystal from Fox Electronics that operates from 3.2 to 80 MHz. It has a frequency tolerance of 50 PPM tolerance and stability of 50 PPM. The crystal has a load capacitance of 10 pF and can operate at temperatures from -55ºC to 125ºC. The HC49SDLF is available as a SMD crystal with a 3.2 mm height. Download Datasheet | Product Details
|
| | |
|
|  | Fixed Attenuator from Pasternack Enterprises Inc The Fixed Attenuators are available in a number of attenuation configurations from 1 to 10 dB with 1 dB steps. They are also available in 16 dB and 20 dB options. The attenuators can handle up to 2 watts of power and can be used in the broadcast industry for signal leveling and to attenuate (or reduce) strong input signals to sensitive broadcasting equipment. Download Datasheet | Product Details
|
| | |
|
