PREV 30th Jan, 2019 NEXT

New RF & Microwave Products this Week

30 Jan, 2019 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 30 Jan, 2019
 
Sponsored by Anokiwave
 
 
 
New RF & Microwave Products this Week
RF Switch
SPDT RF Switch from DC to 18 GHz

RF Switch from Mini Circuits

The MSP2TA-18D+ from Mini Circuits is an absorptive SPDT RF switch that operates from DC to 18 GHz. It can handle up to 20 W of input power, has a low insertion loss of 0.3 dB and isolation of 70 dB at 18 GHz. The switch has a switching speed of 20 milliseconds. It is available in a module and is ideal for automated test equipment (ATE) and redundancy switching for microwave radio applications.
 
Download Datasheet | Product Details
 
RF & Microwave Isolator
Low Magnetic Field Coaxial Isolator from 8 to 18 GHz

RF & Microwave Isolator from VidaRF

The VCI-80180-X from VidaRF is a low magnetic field coaxial isolator that operates from 8 to 18 GHz. This isolator provides an isolation of 16 dB with an insertion loss of 0.7 dB and VSWR of 1.4:1. It can handle up to of 5 W (forward) and 1 W (reverse) power. The module is available with SMA connectors. The Isolators are stackable for space savings.
 
Download Datasheet | Product Details
 
Band Pass Filter
2.4 GHz Wi-Fi / BT / LTE Co-Existence BAW Filter

Band Pass Filter from Qorvo

The QPQ1907 from Qorvo is a 2.4 GHz Wi-Fi/BT/LTE Co-Existence BAW Band-Pass Filter. It has extremely steep skirts, simultaneously exhibiting low loss in the Wi-Fi band and high rejection near and in the 2.6 GHz bands. The filter can handle an input power of up to 28 dBm and operates over an extended temperature range from -20 to 95 degree Celcius.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
USB & Ethernet Programmable RF Attenuator from 0.005 to 6 GHz

RF Variable Attenuator from Adaura Technologies

The AD-USB4AR36G95 from Adaura Technologies is a 4 channel, digital programmable attenuator that operates from 0.005 to 6 GHz. The attenuator has an attenuation range from 0 to 95 dB with a step size of 0.25 dB. It provides more than 100 dB of chain to chain isolation and can handle an input power of up to 28 dBm.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
8-Channel Digital Attenuator from 0.2 to 6 GHz

RF Variable Attenuator from Vaunix

The LDA-906V-8 from Vaunix is a highly accurate, bidirectional, 8-Channel Digital Attenuator that operates from 0.2 to 6 GHz. It has a step size of 0.1 dB and typical accuracy of <0.25 dB over 90 dB of control range. This lab brick can handle up to 26 dBm of input power. This Digital Attenuator a portable USB powered device that is sized to fit into a single rack unit for ATE applications.
 
Download Datasheet | Product Details
 
RF Amplifier
20/40 W Dual-Channel Power Amplifier from 1805 to 2200 MHz

RF Amplifier from Wolfspeed, A Cree Company

The PTNC210604MD is a two-stage, dual-channel LDMOS power amplifier that operates from 1805 to 2200 MHz. It provides dual independent outputs with 20 W and 40 W of output power each while operating over a supply of 28 V. This amplifier has on-chip matching for broadband operation, integrated ESD protection and temperature compensation. It is available in a lead-free RoHS complaint package.
 
Download Datasheet | Product Details
 
Sponsored by Anokiwave
Anokiwave
Enabling a Connected World from Megabits to Multi-Gigabits
With over a decade of mmW Active Antenna Silicon IC experience, five years of focused 5G innovation, and three generations of 5G mmW silicon ICs, Anokiwave has made mmW 5G a commercial reality. Learn more at www.anokiwave.com/5G.
 
 
 
Fixed Attenuator
Convection Cooled Fixed Attenuators from DC to 2.4 GHz

Fixed Attenuator from Res-Net Microwave

The RFA1300 Series from Res-Net Microwave are convection cooled fixed attenuators that operate from DC to 2.4 GHz. They can handle an input power of up to 1300 Watts (CW) and are available in attenuation configurations from 3 to 40 dB (3, 10, and 30 dB). The attenuators have a VSWR less than 1.20:1 and are matched to 50 ohms.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
16-Channel Programmable Attenuator System from 5 to 2150 MHz

RF Variable Attenuator from JFW Industries

The 75PA-113-XX from JFW Industries is a line of 75 Ohm Ethernet-Controlled programmable RF Attenuation Systems that operate from 5 to 2150 MHz. They can be configured to have up to 16 sets of attenuators. Each attenuator can be programmed to have an attenuation of up to 95 dB with 1 dB steps and can handle up to 23 dBm of input power.
 
Download Datasheet | Product Details
 
RF Amplifier
600 W Solid State Amplifier from 10 kHz to 400 MHz

RF Amplifier from AR RF/Microwave Instrumentation

The 600A400 is a self-contained, air-cooled, broadband solid-state amplifier that operates from 10 kHz to 400 MHz. The amplifier provides an output power of up to 600 watts from 0.01 to 250 MHz and 500 watts of RF power from 250 to 400 MHz. It has been designed for applications where instantaneous bandwidth, high gain and linearity are required.
 
Download Datasheet | Product Details
 
RF Amplifier
Solid State Bi-directional Amplifier from 4.4 to 5.1 GHz

RF Amplifier from NuWaves Engineering

The NW-BA-C-10-RX02 from NuWaves is a C-Band Solid State Bi-directional Amplifier module that operates from 4.4 to 5.1 GHz. It provides a gain of 10 dB with a RF power of up to 10 watts while operating with 20% power efficiency. The BDA has an auto-sense transmit / receive (T/R) control, with an extremely fast T/R mode switch time of under 2 uS.
 
Download Datasheet | Product Details
 
RF Amplifier
2-Stage Hybrid GaN PA Module from 225 to 2600 MHz

RF Amplifier from MACOM

The MAMG-100227-010C0L is a GaN-on-Si hybrid power amplifier (PA) that operates from 225 to 2600 MHz. It delivers an output power of 10 W CW, power gain of 22 dB with a power added efficiency (PAE) of 40%. This broadband module combines the design efficiencies of a fully-matched (50 Ohms), two-stage PA architecture with top-side and bottom-side mounting configurability.
 
Download Datasheet | Product Details
 
Power Divider
30 W, 4-Way Power Divider from 18 to 40 GHz

Power Divider from MECA

The 804-3-29.000 from MECA is a 4-way power divider that operates from 18 to 40 GHz. It can handle up to 30 watts of power, has an insertion loss of under 2.6 dB and isolation over 13 dB. The power divider is available in a module with 2.92mm female connectors.
 
Download Datasheet | Product Details
 
Sponsored by Anokiwave
 
 
 
Termination
0.35 to 2.7 GHz Low PIM Cable Terminations for Small Cell Applications

Termination from Microlab

The TK-200 Series from Microlab are Low PIM Cable Terminations that operate from 0.35 to 2.7 GHz. These terminations are matched to 50 ohms and can handle an average power up to 10 watts and peak power up to 5 KW. The terminations have PIM values as low as -161 dBc. They are available with a 4.3/10, 7/16 DIN, NEX10 and 2.2-5 connector interfaces.
 
Download Datasheet | Product Details
 
Antenna
GSM, UMTS, LTE Antenna Booster for Wireless Devices

Antenna from Fractus Antennas

The FR01-S4-250 from Fractus Antennas is a multi-band chip antenna that covers the GSM, UMTS and LTE Bands (698 - 798 MHz, 824 - 960 MHz and 1710 - 2690 MHz). It delivers a gain of up to 3.6 dBi with an efficiency of 70%. This device is built on a glass epoxy substrate measuring 5 x 5 x 5 mm and is ideal for wireless devices (mobile phones). This single chip antenna can be used across the whole band - it is a standard product, no customizations are required.
 
Download Datasheet | Product Details
 
RF Connector
1.0mm (W) Female Connectors up to 110 GHz

RF Connector from Southwest Microwave

The 24359-001J from Southwest Microwave are 1.0 mm (W) female connectors that operate mode-free up to 110 GHz. They are available as field-replaceable two-hole flange (.390 L) mount connectors. These connectors have a low VSWR of 1.25:1, a low insertion loss of under 0.6 dB and low RF leakage of less than 100 dB. They operate over a temperature range of -55 to 165-degree celcius.
 
Download Datasheet | Product Details
 
RF Cable Assembly
SMP Female Cable Assembly Operates up to 40 GHz

RF Cable Assembly from SV Microwave

The 7012-0796 from SV Microwave is a SMP Female to SMP Female Cable Assembly with a .047 Cable, operating up to 40 GHz. It has an insertion loss of under 1.8 dB and shielding effectiveness of -65 dB from 3 to 26.5 GHz. This cable assembly is designed to accommodate both radial and axial misalignment. It is ideal for SATCOM, aerospace, military and telecom applications. The SMP connectors conform to DSCC 94007, 94008 and MIL-STD-348 standards.
 
Download Datasheet | Product Details
 
Base Station Antenna
10-Port Base Station Antenna from 1695 to 5925 MHz

Base Station Antenna from Kathrein

The 84010564 from Kathrein is a 10-port Base Station Antenna that operates from 1695-2690 MHz, 3550-3700 MHz and 5150-5925 MHz. It delivers a gain of up to 14.6 dBi and can handle an input power of under 150 watts. The antenna measuring 610 x 377 x 169 mm, is available with 4.3-10 female connectors.
 
Download Datasheet | Product Details
 
DC Block
Broadband DC Block from DC to 110 GHz

DC Block from SHF Communication Technologies

The SHF DCB110R from SHF Communication Technologies is a DC Block with 1.00 mm connectors that operates from DC to 110 GHz. It has an insertion loss of less than 1.5 dB and can handle up to 30 watts of input power with a voltage rating of 20 V. The SHF DCB110R measures 17 x 7 x 8 mm and is ideal for SATCOM, antenna measurements, data transmission, and optical communications.
 
Download Datasheet | Product Details
 
Waveguide Filter
Waveguide Band Pass Filter from 35.7 to 40.3 GHz

Waveguide Filter from Microwave Filter Company

The 19594 from Microwave Filter Company is a Ka-band Band Pass Filter with a passband from 35.7 to 40.3 GHz. The filter has an insertion loss of 1 dB and more than 60 dB of rejection @ 33.5 & 44.7 GHz. It is available in a package that measures 2.5 x 0.75 x 0.75 inches with a WR28 waveguide interface. This bandpass filter has been developed for airborne radiometer applications.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
4-Bit Silicon Digital Attenuator from 9 kHz to 40 GHz

RF Variable Attenuator from Analog Devices

The ADRF5721 from Analog Devices is a 4-Bit Silicon Digital Attenuator that operates from 9 kHz to 40 GHz. This attenuator has a 30 dB range with a step size of 2 dB. It has an insertion loss of less than 3.4 dB, and can handle up to 26 dBm of average power and 30 dBm of peak power. The ADRF5721 requires a dual supply voltage of +3.3 V and -3.3 V.
 
Download Datasheet | Product Details
 
RFID Tag
Single Use UHF RFID Tag for Non-metallic Surfaces

RFID Tag from Confidex Ltd

The Confidex Casey from Confidex Ltd is an EPC Global Class1 Gen2 passive UHF RFID tag that operates from 860 to 960 MHz. This single-use label is designed specially for applications in which the RFID label is placed close to high dielectric materials. It has a read range of up to 6.5 m (EU) & 6 m (US) on cardboard and up to 8.5 m (EU) & 9 m (US) on plastic.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. Our weekly newsletter provide users with the latest news, information on new product releases, upcoming events, new white papers and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]