1. everything RF
  2. RF Newsletters
more
PREV 13th Feb, 2019 NEXT

New RF & Microwave Products this Week

13 Feb, 2019 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 13 Feb, 2019
 
Sponsored by SV Microwave
 
 
 
New RF & Microwave Products this Week
RF Amplifier
3.4 to 3.6 GHz Hybrid GaN PA for 5G Massive MIMO Applications

RF Amplifier from RFHIC

The RTH343610X is a GaN hybrid power amplifier module that operates from 3400 to 3600 MHz. It has been designed for 5G Massive MIMO systems, small cells, base station and low power remote radio head applications. This fully matched 2-staged Doherty GaN power amplifier module can deliver up to 10 Watts of power with a gain of 28.5 dB and an efficiency of 42%.
 
Download Datasheet | Product Details
 
RF Amplifier
2 W GaN Amplifier Die from 2 to 20 GHz

RF Amplifier from Qorvo

The QPA2213D is a wide band GaN driver amplifier MMIC that operates from 2 to 20 GHz. This amplifier provides over 2 watts of saturated power with a gain of 16 dB and PAE of 23%. It has DC blocking capacitors on both RF ports, which are matched to 50 ohms. The amplifier is ideal for both commercial and military wide band systems.
 
Download Datasheet | Product Details
 
RF Amplifier
2500 W S-Band Solid State Pulse Amplifier

RF Amplifier from Advantech Wireless

The APRA-S2500A from Advantech Wireless is an S-Band GaN-based Solid State Pulse Amplifier that operates from 2.7 to 2.9 GHz. It provides an output of more than 2500 W @ 10% duty cycle over the full band and operating temperature range. The amplifier has a fast pulse rise/fall times of under 100 ns.
 
Download Datasheet | Product Details
 
Power Divider
4-Way Power Divider from 4 to 45 GHz

Power Divider from Pulsar Microwave

The PS4-54-452/11S from Pulsar Microwave is a 4-Way power divider that operates from 4 to 45 GHz. It can handle up to 10 watts of power with an isolation of over 10 dB and insertion loss of under 5 dB. The power divider has an amplitude balance of 2 dB and phase balance of 15 degrees. It is available in a module that measures 2.2 x 1.75 x 0.40 inches with 2.92 mm connectors.
 
Download Datasheet | Product Details
 
180 Degree Hybrid Coupler
750 W, 180 Degree Hybrid Combiner/Divider from 200 to 1000 MHz

180 Degree Hybrid Coupler from Werlatone Inc

The H7498 from Werlatone is a 180 degrees hybrid coupler that operates from 200 to 1000 MHz. It provides an isolation of more than 20 dB, insertion loss of under 0.3 dB and amplitude balance of 0.35 dB. This 3 dB coupler can handle up to 750 watts of CW power and has a VSWR of below 1.30:1. It is available in a module with N-type female connectors.
 
Download Datasheet | Product Details
 
Directional Coupler
High Directivity Directional Coupler from 1 to 500 MHz

Directional Coupler from Synergy Microwave Corporation

The KBK-703S from Synergy Microwave is a directional coupler that operates from 1 to 500 MHz. It provides 11.5 dB of coupling with a directivity of more than 20 dB and a low insertion loss of under 1 dB. The coupler is matched to 50 ohms and can handle an input power of up to 1 watt. It is available in a connectorized module.
 
Download Datasheet | Product Details
 
Sponsored by SV Microwave
LiteTouch Solderless PCB Connectors
Check Out SV’s High Frequency LiteTouch Solderless PCB Connectors!
SV offers a complete line of high frequency surface mount PCB connectors that meet the industry need for high performing solderless connectors for precision, thin substrate mounting while keeping the board material intact. Configurations: 2.92mm, 2.4mm, and SMA. Click here to learn more.
 
 
 
RF Amplifier
C-Band Super Low Noise Amplifier with Fault Detection

RF Amplifier from AmpliTech

The APT3-05400590-1010-LS-D4-FAC is a Low Noise amplifier that operates from 5.4 to 5.9 GHz. It provides a P1dB of 12 dBm and a gain of 28 dB with a noise figure of less than 0.9 dB. An internal limiter at the input provides protection of up to 2W CW of RF input power over the full band.
 
Download Datasheet | Product Details
 
RF Amplifier
26 to 62 GHz Low Noise Amplifier

RF Amplifier from Low Noise Factory

The LNF-LNR26_62A is an ultra-low noise amplifier that operates from 26 to 62 GHz. It provides a gain of 33 dB with a noise figure of 2.10 dB. The LNA is available in a coaxial module that measures 17.80 x 15.15 x 6.80 mm with industry standard 1.85 mm and Nano-D connectors.
 
Download Datasheet | Product Details
 
OCXO
122.88 MHz Miniature Sine Wave OCXO

OCXO from Dynamic Engineers

The OCXO2525AR-122.88MHz-A-V from Dynamic Engineers is an OCXO that operates at 122.88 MHz. It has a phase noise of -150 dBc/Hz at 1 kHz and a stability of below ±100 ppb over a temperature range from -30 to 70°C. The device requires a supply voltage of 12 V and provides a sinewave waveform output.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
1090 MHz Fixed Frequency Synthesizer Module

Frequency Synthesizer from Z-COMM

The RFS1090A-LF is a Fixed Frequency Synthesizer Module that is phase locked at 1090 MHz to an external 10 MHz reference oscillator with a stability of ±2.5ppm. This low cost PLL features a phase noise of -93 dBc/Hz, -98 dBc/Hz, and -118 dBc/Hz at the 1 kHz, 10 kHz and 100 kHz offsets, respectively.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
Ethernet-Controlled Programmable RF Attenuation System from 100 MHz to 40 GHz

RF Variable Attenuator from JFW Industries

The 50PA-1019-XX from JFW Industries is a line of ethernet-controlled programmable RF attenuation systems that operate from 100 MHz to 40 GHz. They can be configured to have up to 16 sets of attenuators. Each attenuator can be programmed to have an attenuation of up to 62 dB with 1 dB steps and can handle up to 25 dBm of input power.
 
Download Datasheet | Product Details
 
Front End Module
5 GHz Front-End Module for Handsets and Tablets

Front End Module from Skyworks Solutions

The SKY85716-11 from Skyworks is a highly integrated front-end module (FEM) for 5 GHz 802.11n/ac applications. It can be used in WiFi-enabled handsets, tablets, and mobile/portable systems and System-in-Package (SIP) modules for embedded applications.
 
Download Datasheet | Product Details
 
Sponsored by SV Microwave
 
 
 
RF Amplifier
2.5 W RF Power Amplifier from 130 to 950 MHz

RF Amplifier from CML Microcircuits

The CMX901 is a three stage RF power amplifier that operates from 130 to 950 MHz. It provides a gain of 40 dB and an output power of 2.5 W @ 160 MHz, while operating over a single supply of 2.5 to 6 V. The CMX901 is available in a 5 x 5 mm low thermal resistance 28-pin WQFN package and is ideal for wireless data communications, RFID readers/writers and wireless sensor networks applications.
 
Download Datasheet | Product Details
 
RF Connector
Precision Coaxial 1.35 mm Connectors up to 90 GHz

RF Connector from Rosenberger

The RPC-1.35 connector series (E connectors) can operate up to 90 GHz. These connectors have a highly robust mechanical design that can handle a minimum of 3000 mating cycles and have been designed for high-performance RF measurements in the E-Band.
 
Download Datasheet | Product Details
 
RF Switch
High Power SP4T RF Switch from 0.05 to 6 GHz

RF Switch from Infineon Technologies

The BGS14MPA9 from Infineon is a SP4T switch optimized for 2G / 3G / 4G and 5G cellular applications up to 6 GHz. It has an insertion loss of 0.2 dB and provides an isolation of 50 dB @ 1 GHz. The switch can handle an input power of up to 38 dBm and is perfect for LTE 4G applications, such as Uplink-Carrier Aggregation, High Power User Equipment (HPUE Class 2) and 5G sub 6 GHz.
 
Download Datasheet | Product Details
 
RF Amplifier
60 W Solid-State Amplifier from 0.7 to 18 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 60/40S1G18B is a portable, self-contained, air-cooled, dual-band, broadband, solid-state amplifier that operates from 0.7 to 18 GHz. The amplifier provides an output power of more than 40 watts from 0.7 to 6 GHz and more than 60 watts from 6 to 18 GHz. It has been designed for applications where instantaneous bandwidth, high gain and linearity are required.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-S1260 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. This shielded box has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz. It has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
Frequency Multiplier
Frequency Doubler with 3 to 10 GHz Output

Frequency Multiplier from Eclipse Microwave

The D1550LL is a frequency doubler with an input frequency of 1.5 to 5 GHz and output frequency from 3 to 10 GHz. It provides a conversion loss of 10.5 dB when driven by an input signal of 10 to 13 dBm. The D1550LL is available as a connectorized module with SMA female connectors.
 
Download Datasheet | Product Details
 
Antenna
4x4 MIMO 2.4/5 GHz Wi-Fi Antenna

Antenna from PCTEL

The GL4X4MIMO-SF from PCTEL is a dual band 802.11ac/p MIMO antenna that can help boost data rates for utility networks, Intelligent Transportation Systems (ITS), and other Industrial IoT (IIoT) applications. It delivers a gain of up to 4 dBi and can handle an input power of 25 watts.
 
Download Datasheet | Product Details
 
Base Station Antenna
16-Port Small Cell Antenna from 1695 to 5925 MHz

Base Station Antenna from CommScope

The V4SSPP-360S-F from Commscope is a 16-port small cell antenna that operates from 1695-2690 MHz (8 ports), 3300-3800 MHz (4 ports) and 5150-5925 MHz (4 ports). It has a 360 degree horizontal beam width and delivers a gain of up to 8.4 dBi. The antenna can handle an input power of up to 300 watts at 50 degree celcius. It is 620 mm in length and has an outer diameter of 305 mm. The antenna has 4.3-10 female connectors.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, technical articles and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]