PREV 6th Mar, 2019 NEXT

New RF & Microwave Products this Week

6 Mar, 2019 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 6 Mar, 2019
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
Up Converter
Programmable Microwave Up Converter from 24 to 44 GHz

Up Converter from Analog Devices

The ADMV1013 is a wideband, microwave upconverter that accepts an input IF frequency of 0.8 to 6 GHz and upconverts it to an RF frequency from 24 to 44 GHz. The upconverter has 2 upconversion modes - direct conversion from baseband I/Q to RF and single-sideband (SSB) upconversion from real IF.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Handheld Spectrum Analyzer from 9 kHz to 54 GHz

RF Spectrum Analyzer from Anritsu

The Field Master Pro MS2090A from Anritsu is a RF handheld spectrum analyzer that operates up to 54 GHz and has a real-time spectrum analysis bandwidth of up to 100 MHz. It has a Displayed Average Noise Level (DANL) of less than -160 dBm and Third Order Intercept (TOI) of +20 dBm, for more accurate spectrum clearing, radio alignment, and harmonic and distortion measurements.
 
Download Datasheet | Product Details
 
Power Divider
30 W, 2-Way Power Divider from 18 to 40 GHz

Power Divider from MECA

The 802-3-29.000 from MECA is a 2-way power divider that operates from 18 to 40 GHz. It can handle up to 30 watts of power, has an insertion loss of under 1.80 dB and isolation over 14.5 dB. The power divider is available in a module with 2.92 mm female connectors.
 
Download Datasheet | Product Details
 
Wireless SoC
Wi-Fi 6 and Bluetooth 5.1 Wireless SoC

Wireless SoC from Qualcomm

The QCA6390 from Qualcomm is an advanced 14nm 2x2 Mobile Connectivity SoC supporting the full suite of Wi-Fi 6 and Bluetooth 5.1 features for mobile and computing devices. It is designed to deliver faster, more secure, and more robust Wi-Fi experiences and enable new Bluetooth audio capabilities such as ultra-high-definition voice and low-latency gaming over wireless headphones, earbuds, and speakers.
 
Download Datasheet | Product Details
 
Wireless SoC
Bluetooth 5.1 Direction Finding SoC with Thread and Zigbee Support

Wireless SoC from Nordic Semiconductor

The nRF52811 from Nordic Semiconductor is a wireless SoC that supports Bluetooth 5.1 Direction Finding, Bluetooth 5 Long Range, 802.15.4, Thread, ANT and Zigbee. It includes a multiprotocol 2.4 GHz radio (featuring 4 dBm output power with -97 dBm sensitivity at 1 Mbps in Bluetooth 5 mode), 64 MHz, 32-bit Arm Cortex M4 processor, and 192 kB Flash and 24 kB RAM memory.
 
Download Datasheet | Product Details
 
Wireless SoC
Compact Sub-GHz Module for 802.15.4 Applications

Wireless SoC from Microchip Technology

The ATSAMR30G18A is an ultra low-power microcontroller equipped with an IEEE 802.15.4 compliant radio for the sub-GHz frequency bands 780 MHz (China), 868 MHz (Europe) and 915 MHz (North America). It uses the 32-bit ARM Cortex-M0+ processor and provides 256KB of Flash and 40KB of SRAM (8KB battery backed) memory.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Ferrite Chip Inductors
Ferrite Chip Inductors Ideal for Mobile and Infrastructure Equipment Available at Mouser
Featuring ferrite construction for high current handling, Coilcraft Low Resistance Ferrite Chip Inductors offer 25 inductance values from 20nH to 3.3µH with 5% inductance tolerance for all values. These low-resistance ferrite chip inductors are used for ground-to-ground isolation. Click here to learn more.
 
 
 
RF Amplifier
5.5 to 8.5 GHz, GaN MMIC Power Amplifier

RF Amplifier from Wolfspeed, A Cree Company

The CMPA5585030D from Wolfspeed is a GaN HEMT-based MMIC Power Amplifier that operates from 5.5 to 8.5 GHz. The PA provides a saturated output power of 50 watts with a signal gain of 30 dB and power added efficiency of over 40%. It requires a supply voltage of 28 Volts and has a high breakdown voltage. This MMIC contains a two-stage, reactively matched amplifier design approach enabling very wide bandwidths to be achieved.
 
Download Datasheet | Product Details
 
RF Amplifier
C-Band Bi-directional Amplifier Module from 4.4 to 4.9 GHz

RF Amplifier from NuWaves Engineering

The NW-BA-C-15-RX01 from NuWaves is a C-Band Bi-directional Amplifier module that operates from 4.4 to 4.9 GHz. It is ideal for extending the communication range of half-duplex transceivers with constant-envelope waveforms (i.e. PSK and FSK-based modulations, such as SOQPSK and GFSK), and delivers an RF transmit power of 15 Watts. In receive mode, the module provides a low noise figure of 3.5 dB with a gain of 10 dB.
 
Download Datasheet | Product Details
 
RF Amplifier
High Power Ka-band Amplifier from 26 to 40 GHz

RF Amplifier from ERZIA

The ERZ-HPA-2600-4000-33 is a High Power Amplifier that operates from 26 to 40 GHz. This Ka-band amplifier provides an output power of 36 dBm with a gain of 35 dB. It requires a 12 V supply voltage and draws 2.5 A of current. This PA is available in a compact module that measures 30 x 50 x 17.5 mm. It is ideal for industrial, SATCOM, Telecom, Space and Military applications.
 
Download Datasheet | Product Details
 
RF Amplifier
2.2 kW Solid State GaN Power Amplifier from 1 to 2.5 GHz

RF Amplifier from Exodus Advanced Communications

The AMP2041-1 is a solid state GaN power amplifier from Exodus that operates from 1 to 2.5 GHz. It provides an output power of more than 2.2 KW with a gain of over 63 dB. The amplifier has an ultra-wide instantaneous bandwidth and is suitable for linear CW and composite signal modulation standards & applications. It is available in a 32U rack cabinet with N-type female connectors.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
31 dB, 5-Bit Digital Attenuator from DC to 20 GHz

RF Variable Attenuator from Atlanta Micro

The AM2005 from Atlanta Micro is a 5-Bit Digital Attenuator that operates from DC to 20 GHz. It has an attenuation range of 31 dB and a step size of 1 dB. This device provides low insertion loss, flat frequency response, and low attenuation error over the operating temperature range of -40C to +85C. It is available in a 4 x 4 mm QFN package.
 
Download Datasheet | Product Details
 
Digital Phase Shifter
6-bit GaAs Phase Shifter Die from 2 to 4 GHz

Digital Phase Shifter from VIPER RF

The VRFC0008-BD from Viper RF is a 6-bit GaAs phase shifter die that operates from 2 to 4 GHz and provides 360 degrees of phase coverage with a 5.625 degree phase step. The phase shifter has an insertion loss of under 7.5 dB and an RMS phase error of 3.3 degrees (at 3 GHz). The RF ports are DC blocked and matched to 50 Ohms. The die measuring 3 x 3 x 0.1 mm is ideal for Defence and Instrumentation applications.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
 
 
 
TCXO
32.768 kHz, CMOS Output TCXO

TCXO from Dynamic Engineers

The TCXO3225BL-32.768KHz-A is a TCXO that provides an extremely stable 3.3V CMOS output at 32.768 kHz. It has tight frequency stability of ±5 ppm (-40 to +85°C) and extremely low power consumption of just 1.37µA. The device is available in a surface mount package that measures 3.3 x 2.5 x 1.3 mm and is ideal for use within smart meters, data loggers, GPS receivers or any portable device.
 
Download Datasheet | Product Details
 
Band Pass Filter
Coaxial bandpass Filter from 4.4 to 5 GHz

Band Pass Filter from Mini Circuits

The ZX75BP-4700-S+ from Mini-Circuits is a coaxial band pass filter with a passband frequency from 4.4 to 5 GHz. It has a low passband insertion loss of less than 3 dB and very sharp rejection of over 40 dB from DC to 2800 MHz and over 20 dB from 6300 to 10,000 MHz. This ZX75BP-4700-S+ is available in a connectorized package and is ideal for defense systems, fixed satellites, radars and navigation system applications.
 
Download Datasheet | Product Details
 
Tunable Filter
Tunable Notch Filter from 1.1 to 1.4 GHz

Tunable Filter from Lark Engineering

The XTMCN from Lark Engineering is a tunable notch filter with a tuning range from 1.1 to 1.4 GHz with a 3 dB BW of over 90 MHz. It has an insertion loss of under 1.5 dB and return loss of over 13 dB. This 8-bit filter can handle an input power of up to 1 watt. It is available in a module that measures 1.5 x 1.9 x 5.7 inches and is ideal for military radar systems, aircraft, shipboard, hand held radios and GPS applications.
 
Download Datasheet | Product Details
 
Waveguide Circulator
0.5 W Waveguide Circulator from 59 to 61 GHz

Waveguide Circulator from HXI

The HMC15-385-60.0-2.0 is an RF circulator that operates from 59 to 61 GHz. It provides an isolation of over 20 dB, insertion loss of 0.6 dB and a retun loss of better than 20 dB. The circulator can handle up to 0.5 watts of power. It has a WR-15 waveguide interface and is ideal for radar applications.
 
Download Datasheet | Product Details
 
Directional Coupler
30 dB Directional Coupler from 0.5 to 18 GHz

Directional Coupler from VidaRF

The VDC05180A30 from VidaRF is a directional coupler that operates from 0.5 to 18 GHz. This 30 dB directional coupler has an insertion loss of under 1.2 dB, directivity of over 10 dB and can handle an input power of up to 50 watts. It is available in a module with SMA female connectors.
 
Download Datasheet | Product Details
 
Multicoupler
8-Way Multicoupler for GPS/GNSS Applications

Multicoupler from Microlab

The GPSS008-S from Microlab is a 8-way multicoupler that operates from 1.559 to 1.610 GHz. It delivers a gain of 6 dB with a noise figure of 3 dB. This multicoupler provides an isolation of more than 20 dB and can handle an input power of up to -10 dBm. It has an ‘on board’ health monitoring circuit which monitors the operation of the active amplifier.
 
Download Datasheet | Product Details
 
Frequency Multiplier
20 to 52 GHz Active Doubler Chipset with Exceptional Harmonic Suppression

Frequency Multiplier from Marki Microwave

The ADA-2052 from Marki is an active doubler that accepts an input frequency from 10 to 26 GHz (20 to 52 GHz output frequency). It consists of an input buffer amplifier, doubler, and output buffer amplifier to provide a +16 dBm output (suitable for driving most mixers) from a -6 to +2 dBm input. This device is available in a connectorized module and is ideal for lab use, test and measurement, and prototype systems.
 
Download Datasheet | Product Details
 
GNSS Module
Multi-Constellation GNSS Module Supporting GPS, NavIC and GAGAN

GNSS Module from Telit Communications

The SL869T3-I from Telit is a multi-constellation positioning module that can navigate using GPS L1, IRNSS/NavIC L5 and the GAGAN L1 SBAS systems concurrently. It is designed to support the Indian NavIC (formerly IRNSS) constellation L5 signal simultaneously with GPS L1 and SBAS.
 
Download Datasheet | Product Details
 
Antenna
Flexible PCB Antenna for LTE CAT M1 and NB-IoT Devices

Antenna from Laird Technologies

The Revie Flex (EFF692SA3S) is a flexible PCB antenna for LTE CAT M1 and NB-IoT devices that operates from 698-875 MHz and 1710-2500 MHz. It delivers a gain of up to 3.7 dBi with an efficiency of over 51% and can handle an input power of up to 5 watts. The omnidirectional antenna measuring 90 x 20 x 0.16 mm is designed for quick and easy mounting on a plastic housing via the supplied adhesive backing.
 
Download Datasheet | Product Details
 
RF Repeaters
Channelized Digital Repeater for Public Safety 700/800 MHz Bands

RF Repeaters from Advanced RF Technologies

The PSR-78-9533 from ADRF Tech is a Channelized Digital Repeater designed for use in the 700 and 800 MHz bands which have been designated for use to firefighters and the police (in the US). It has been designed to protect the lives of first responders and building occupants by ensuring blanket connectivity, regardless of the building layout and type of emergency.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, white papers, technical articles and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]