1. everything RF
  2. RF Newsletters
more
PREV 27th Mar, 2019 NEXT

New RF & Microwave Products this Week

27 Mar, 2019 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 27 Mar, 2019
 
Sponsored by Rohde & Schwarz
 
 
 
New RF & Microwave Products this Week
RF Amplifier
2.5 W Solid State power Amplifier from 20 MHz to 6 GHz

RF Amplifier from Linwave

The LW10-793611 from Linwave is a GaN-based Solid State Power Amplifier that operates from 20 MHz to 6 GHz. It provides an output power of 34 dBm with an efficiency of 16.5 % and a gain of over 29 dB. The amplifier can be used for both pulsed or CW applications. It is available in a module that measures 75 x 60 x 15 mm with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Switch
10 MHz to 10 GHz SP4T RF Switch

RF Switch from RF Bay

The WBS4T-10G from RF Bay is an SP4T RF switch that operates from 10 MHz to 10 GHz. This SP4T switch has an insertion loss of 1.5 dB and an isolation of 40 dB at 5 GHz. It can handle up to 33 dBm of power and has a switching time of 1.3 µs. It requires a +/- 5 V DC Supply/Control Voltage and is available in a module with SMA Connectors.
 
Download Datasheet | Product Details
 
RF Switch
USB Programmable SP4T RF Switch from 10 MHz to 1 GHz

RF Switch from Vaunix

The LSW-102P4T-75F from Vaunix is a USB programmable SP4T Switch that operates from 10 to 1000 MHz. This 75 Ohm non-reflective RF switch has an insertion loss of 3.5 dB, isolation of over 50 dB and can handle an input power of up to 10 watts. It is available in a module with type-F connectors and is ideal for Automated Test Equipment (ATE), Engineering/Production Test Labs, UHF and L-band ATE applications.
 
Download Datasheet | Product Details
 
RF Amplifier
Ultra-Low Noise Amplifier for SDARS, Signal Boosters and GPS Applications

RF Amplifier from Guerrilla RF

The GRF2073-W from Guerrilla RF is a linear, ultra-low noise amplifier designed for automotive satellite radio multi-stage LNAs, signal boosters and GPS applications. It provides a P1dB of 19.8 dBm and a gain of 20.5 dB with a noise figure of 0.40 dB while operating at 2332.5 MHz. The LNA requires a supply voltage of 2.7 - 5.5 V and consumes up to 100 mW of power. It is available in a surface mount package.
 
Download Datasheet | Product Details
 
RF Amplifier
1,000 W Pulsed Power TWT Amplifier from 2.5 to 7.5 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The Model 1000TP2G8 from AR RF/Microwave Instrumentation is a self-contained, forced air cooled, broadband traveling wavetube (TWT) microwave amplifier designed for pulse applications from 2500 to 7500 MHz, at low to moderate duty factors where instantaneous bandwidth and high gain are required.
 
Download Datasheet | Product Details
 
RF Amplifier
DC to 24 GHz GaAs MMIC pHEMT Self-Biased Distributed Power Amplifier

RF Amplifier from Microsemi

The MMA052PP45 is a GaAs MMIC pHEMT distributed self-biased amplifier that operates from DC to 24 GHz. The amplifier provides a gain of 14 dB with a noise figure of 3.5 dB and an output IP3 of 35 dBm at 10 GHz. It operates over a 10 V supply while drawing 235 mA of current. It is available in a 4.5 x 4.5 mm plastic QFN package and is ideal for test instrumentation, wideband military and space applications.
 
Download Datasheet | Product Details
 
Sponsored by Rohde & Schwarz
Rohde & Schwarz
With highest precision. Hidden truths brought to light. The new R&S®ZNA network analyzer.
The R&S®ZNA network analyzer features outstanding RF performance, a broad range of software functions and a unique hardware concept. With its innovative dual-touchscreen and DUT-oriented operating concept, it is a powerful, universal test platform for characterizing active and passive DUTs. Click here to learn more.
 
 
 
RF Mixer
1.5 to 7 GHz Programmable Gain Downconverting Mixer

RF Mixer from Analog Devices

The LTC5555 is a programmable gain downconverting mixer ideal for receivers that require a precise gain setting. The IC consists of an active mixer and a digital IF VGA with 15.5 dB gain control range. The IF gain is programmed in 0.5 dB steps through the SPI or parallel interface. The mixer is optimized for the 3 to 7 GHz RF frequency range but may be used down to 1.5 GHz with degraded performance.
 
Download Datasheet | Product Details
 
Power Divider
Surface Mount 8-Way Power Divider from 500 MHz to 7 GHz

Power Divider from BBTLine

The BBTLine_8Way_V2_SMT is a Surface Mount 8-Way Power Divider that operates from 500 MHz to 7 GHz. It has an insertion loss of under 2.7 dB at 6 GHz and provides over 10 dB of isolation. The divider can handle up to 20 watts of power. It has an excellent amplitude/phase balance of 0.4 dB/7 degrees at 6 GHz.
 
Download Datasheet | Product Details
 
Directional Coupler
5G Ready Millimeter-Wave Directional Coupler from 6 to 40 GHz

Directional Coupler from MECA

The 765-10-23.000 from Meca is a 5G ready millimeter-wave directional coupler that operates from 6 to 40 GHz. Available in 10 dB coupling, It provides an insertion loss of 1.3 dB and directivity of more than 12 dB. The coupler can handle an average input power of up to 20 W and a peak power of up to 1 KW. It is available in a module with 2.92 mm female connectors.
 
Download Datasheet | Product Details
 
Directional Coupler
3 to 30 dB, Directional Couplers from 130 to 520 MHz

Directional Coupler from Werbel Microwave

The C-1352-dB-N series of Directional Couplers from Werbel Microwave operate from 130 to 520 MHz. They are available in coupling values of 3, 5, 6, 7, 10, 15, 20 and 30 dB with a directivity of over 18 dB and a VSWR of 1.30:1. The couplers can handle up to 100 watts of average power. They are available in a module with N-type female connectors which are matched to 50 ohms.
 
Download Datasheet | Product Details
 
DC Block
Inner-Outer DC Block from 500 MHz to 18 GHz

DC Block from L3 Narda-MITEQ

The 4563 from L3 Narda-MITEQ is an Inner-Outer DC Block that operates from 500 MHz to 18 GHz. The DC block provides an insertion loss of 1.5 dB and an Input/Output VSWR of 1.15:1. This connectorized DC Block has SMA M/F connectors with a breakdown voltage of 150 V and can handle up to 10 Watts of RF power.
 
Download Datasheet | Product Details
 
Band Pass Filter
75 Ohm Band Pass Filter from 950 to 2250 MHz

Band Pass Filter from Mini Circuits

The BPF-AS1600-75+ from Mini-Circuits is a 75 Ohm bandpass filter with a passband frequency from 950 to 2250 MHz. It has a low passband insertion loss of less than 1.6 dB and VSWR of 1.60:1. This BPF-AS1600-75+ is available in a surface mount package that measures 0.433 x 0.276 x 0.197 inches and is ideal for radar networks, base station controllers, L-band satellite and telecommunication applications.
 
Download Datasheet | Product Details
 
Sponsored by Rohde & Schwarz
 
 
 
Band Pass Filter
460 MHz Band Pass Filter

Band Pass Filter from KR Electronics Inc

The 3353-SMA from KR Electronics is a band pass filter with a center frequency of 460 MHz and 3dB bandwidth of 28 MHz. The filter has an insertion loss of under 6 dB and a rejection of over 70 dB. It is available in a module that measures 101 x 33 x 19 mm with SMA connectors. Other center frequencies and bandwidths are available.
 
Download Datasheet | Product Details
 
GNSS Module
Multi-Constellation, Dual-Band GNSS Module

GNSS Module from Quectel

The L89 from Quectel is a GNSS module that supports multi-constellation GNSS and dual GNSS bands. It can acquire and track GPS, IRNSS, GLONASS, BeiDou, Galileo and QZSS signals. The module can work at L1 and L5 bands simultaneously with the help of 2 embedded antennas.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure for 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G Device Testing

RF Shielded Test Enclosure from RF Electronics

The HDRF-2124-T from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides an isolation of more than 90 dB. It has shielded power filters for providing power connection in the box while blocking all wireless signals.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
640 MHz Surface Mount Fixed Frequency Synthesizer

Frequency Synthesizer from Z-COMM

The SFS0640A-LF from Z-Communications is a RoHS compliant Fixed Frequency Synthesizer that operates at 640 MHz with an external 10 MHz reference. This single frequency synthesizer has a phase noise of -100 dBc/Hz, -105 dBc/Hz, and -124 dBc/Hz at the 1 kHz, 10 kHz and 100 kHz offsets, respectively.
 
Download Datasheet | Product Details
 
Block Up Converter
Ka-Band Block Up-Converters from 27.5 to 31 GHz

Block Up Converter from Actox

The ACTX-Ka Series from Acorde are RF Block Up-Converters (BUCs), that converts an Input frequency from 950 to 2000 MHz to an output frequency from 27.5 to 31 GHz. These BUCs have been designed for Ka-band satellite communication systems. They integrate a power supply, phase locked oscillator, power amplifier and frequency converter in the module.
 
Download Datasheet | Product Details
 
Frequency Multiplier
Passive Frequency Doubler with 40 to 60 GHz Output

Frequency Multiplier from Farran Technology

The FD-19-0001 from Farran Technology is a full-band passive frequency doubler with an output frequency from 35 to 60 GHz. The frequency doubler has a WR-19 Waveguide Interface at the output and a K-Type connector at the input. It accepts an input power range from 18 to 23 dBm and produces 10 dBm of output power.
 
Download Datasheet | Product Details
 
RF Power Meter
Multi-Channel RF Power Meter from DC to 110 GHz

RF Power Meter from Rohde & Schwarz

The R&S NRX series of power meters simultaneously supports up to four R&S NRP and R&S NRQ6 power sensors and displays the results clear on the flexible configurable screen. These instruments support both terminating and directional power sensors. Operating up to 110 GHz (sensor dependent), they have a power measurement range of 0.1 fW to 30 W.
 
Download Datasheet | Product Details
 
Power Sensor
10 MHz to 6 GHz Average Power Sensor

Power Sensor from Keysight Technologies

The L2051XA from Keysight is an average power sensor that operates from 10 MHz to 6 GHz. This power sensor has a wide dynamic range of -70 to +26 dBm. The sensor provides very accurate and repeatable power measurements for any modulated signal and comes with super-fast measurement speed of 50,000 readings/sec. It has a deep memory of up to 1 MB and a variable sampling rate of up to 1 MS/s.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
Front Loading Shielded Test Enclosure from 700 to 6000 MHz

RF Shielded Test Enclosure from DVTest

The dbCHECK is a shielded test enclosure that operates from 700 to 6000 MHz. It can achieve more than 90 dB of isolation and has a dual RF gasket design, high quality broadband RF absorber, and filtered I/O panels. This test enclosure is an ideal solution for repeatable wireless device testing.
 
Download Datasheet | Product Details
 
TCXO
10 MHz to 1.5 GHz Temperature Controlled Crystal Oscillators

TCXO from Q-Tech Corporation

The QTCT236 series from Q-Tech Corporation are Temperature Controlled Crystal Oscillators (TCXOs) that operate from 10 MHz to 1.5 GHz. They require a supply voltage of 2.5 & 3.3 V dc and provides a CMOS, LVDS or LVPECL output. The TCXOs have a phase noise of -107 dBc/Hz at 1 kHz and operates over a temperature range of -40ºC to 85ºC.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. Our weekly newsletter tells users about new product releases, interesting news stories, articles, and white papers.