PREV
3rd April, 2019
NEXT
New RF & Microwave Products this Week
3rd April, 2019 - everything RF NewsletterRF & Microwave industry updates. View it in your browser
| New RF & Microwave Products this Week |
|
|
| | Ku-Band Waveguide Low Noise SATCOM Amplifier | RF Amplifier from AmpliTech | | The APTW5-10701280-0710-75-S from AmpliTech is a Low Noise Amplifier that operates from 10.7 to 12.8 GHz. The amplifier provides an output power of 10 dBm with a gain of 42 dB and a noise figure of 0.7 dB. It has a very flat gain curve and low return loss due to a unique non-isolator design. The amplifier is available with DC internal regulator in a compact, weatherproof package with connectors. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | 60 W GaN Power Amplifier from 5 to 6 GHz | RF Amplifier from Qorvo | | The QPA2308D is an MMIC GaN power amplifier that operates from 5 to 6 GHz. This amplifier provides more than 60 watts of saturated power with a gain of over 21 dB and PAE of 43%. It has DC blocking capacitors on both RF ports, which are matched to 50 ohms. The amplifier is ideal for both commercial and military applications like radar, satcom, EW and space communications. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | 0.1 to 6 GHz, GaAs Double Balanced Mixer MMIC | RF Mixer from OMMIC | | The CGY2184GS/C1 from OMMIC is a GaAs base active double balanced MMIC mixer with an RF/LO frequency from 0.1 to 6 GHz and IF frequency from DC to 3 GHz. The mixer has conversion gain of 18 dB, and uses an active Gilbert Cell Mixer Structure. It is available in a hermetic package and is ideal for GPS, Telecommunication, Radar, Instrumentation, and EW applications. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | 4-Bit Digital Phase Shifter from 1.4 to 2.4 GHz | Digital Phase Shifter from MACOM | | The MAPS-010143 from MACOM is a GaAs pHEMT 4-Bit digital phase shifter that operates from 1.4 to 2.4 GHz. It provides a phase shift from 0 to 360 degrees with an LSB of 22.5 degrees and has an integrated CMOS driver. The phase shifter has a low RMS attenuation error of 0.5 dB and minimal attenuation variation over the phase shift range. It is available in a 4 mm lead-free, 24 Lead PQFN package and it is ideally suited for communication antennas and phased array radars. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | 30 W Low PIM Terminations from 0.38 to 2.7 GHz | Termination from MECA | | The LPT30-4310M from MECA are Low PIM Terminations that operate from 0.38 to 2.7 GHz. These terminations are matched to 50 ohms and can handle an average power up to 30 watts and peak power up to 5 KW. The terminations have PIM values as low as -155 dBc and are thermally compensated to handle full rated power to 85 degree C. They are available with Type N, 4.1/9.5, 4.3/10.0 & 7/16 DIN connector interfaces. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | N-Way Radial Power Divider from 2200 to 2750 MHz | Power Divider from Werlatone Inc | | The D9559 from Werlatone is a radial RF power divider/combiner that operates from 2200 to 2750 MHz. The configuration of this N-Way power divider can be customized to the requirement of the user. The divider can handle up to 40 watts of power, has an insertion loss of less than 0.4 dB with a phase balance of 4 degrees and an amplitude balance of 0.25 dB. This divider/combiner can operate into High Load VSWR Conditions, for an extended period, without damage. It is available in a circular package with N-Type or SMA Connectors. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | 10 dB Dual Directional Coupler from 4 to 8 GHz | Dual Directional Coupler from Sigatek | | The SCC1014143 from Sigatek is a dual directional coupler that operates from 4 to 8 GHz. It has a coupling value of 10 dB with a 1.20 dB variation over the band. The coupler has a directivity of over 18 dB and an insertion loss of less than 0.7 dB. It can handle up to 50 watts of average power and has a VSWR of 1.35:1. The coupler is available in a module with SMA female connectors and is ideal for power monitoring and leveling, sampling of microwave signals and reflection measurement applications. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | Ka-Band Block Up-Converter from 27.5 to 31 GHz | Block Up Converter from ACORDE S.A. | | The ACTX-Ka40W-Ex-V5 from Acorde is a RF Block-Up Converter (BUC), that converts an Input frequency from 950 to 2000 MHz to an output frequency from 27.5 to 31 GHz. This BUC has been designed for Ka-band satellite communication systems. It integrates a power supply, phase locked oscillator, power amplifier and frequency converter in the module. The BUC delivers a saturated output power of 46 dBm with a gain of more than 65 dB. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | On-Metal UHF RFID Logistics Tag | RFID Tag from GAO RFID | | The 116087 is a UHF Mount On Metal RFID tag that operates from 860 to 960 MHz. This EPC global C1G2/ISO 180000-6C tag can be used in tracking management, property management, and logistics tracking, specifically designed to perform on metal surfaces. The tag measures 5.4 x 0.87 x 0.12 inches, has a read range of up to 8 m. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| About everything RF | | everything RF keeps you up to date with the RF & Microwave Industry. Our weekly newsletters consist on the latest news, products, white papers and articles. |
|
|
|
