1. everything RF
  2. RF Newsletters
more
PREV 10th June, 2019 NEXT

Latest News & White Papers this Week

10 June, 2019 - everything RF Newsletter

RF & Microwave industry updates.

 
Date: 10 June, 2019
 
Sponsored by Coilcraft
 
 
 
Latest News this Week
ADI's RF Converters for 4G Base Stations Triple Call Capacity & Data Throughput - Analog Devices
mm-Wave Coaxial Cable Solution Crosses the 145 GHz Barrier - Junkosha
Menlo Micro Unveils RF MEMS Switch that Perform Beyond 20 GHz - Menlo Micro
VNA Test Solution Addresses Emerging High-Frequency 5G and Satellite Applications - Anritsu
New GaN Transistor for RF Energy Exceeds the Efficiency of Most Magnetrons - NXP Semiconductors
Infineon to Acquire Cypress Semiconductor for €9.0 Billion - Infineon Technologies
WIN Semi Introduces New GaN Process for Advanced mm-Wave & 5G Applications - Win Semiconductors
Single Amplifier from 100 kHz to 50 GHz for Sub-6GHz and mm-Wave 5G Applications - MACOM
10W Ka-Band GaN Amplifier for Defense Radar and EW Applications - Qorvo
New Handheld Microwave Analyzers with 100 MHz Real-Time BW for 5G and EW Testing - Keysight Technologies
E-Band Automotive Radar Enables Long Range 3D Target Detection - Arralis
Gore Highlights the Use of its Cables in the Apollo 11 Mission - W. L. Gore & Associates
Keysight Introduces New Phase Noise Test System from 50 kHz to 40 GHz - Keysight Technologies
More News
New White Papers & Articles
The Advanced First Responder Vehicle: A Prototype for the Autonomous Car - Kymeta
Simulation for 5G New Radio System Design and Verification - Keysight Technologies
Forward or Flyback? Which is Better? - Coilcraft
An Introduction to EMC Amplifiers - Rohde & Schwarz
Reaching New Levels of Linearity in Passive Mixers with GaN Technology - Custom MMIC
More White Papers
Upcoming Event
Event Image
Wireless Power Week 2019
Date: 17 to 21 June, 2019
Location: London, United Kingdom
More Events
Sponsored by Coilcraft
Q/Tight Tolerance Air Core Inductors
Q/Tight Tolerance Air Core Inductors – Free Samples!
Coilcraft’s tight tolerance “spring” inductors combine the exceptionally high Q of an air-wound coil with the convenience of surface mounting. Offered in a wide variety of sizes & configurations with Q factors as high as 230 and current ratings up to 5.7 amps. Free samples available!
 
Featured Products this Week
RF Amplifier
High-Power Rack-Mount TWTA from 12 to 18 GHz

RF Amplifier  from dB Control

The dB-3813B is a high-power, rack-mount, pulsed TWT amplifier that operates from 12 to 18 GHz (Ku-band). It provides 3300 watts of peak power with a 6% duty cycle and has a very low phase noise. It is available in a standard 19-inch rack-mount unit with integrated forced-air cooling and is ideal for radar, electronic countermeasures and electronic warfare applications.
Download Datasheet | Product Details
RF Switch
6 Channel SPST Switch from DC to 3 GHz

RF Switch  from Menlo Micro

The MM3100 from Menlo Micro is a 6 Channel SPST Digital-Micro-Mechanical Switch that operates from DC to 3 GHz. This switch has been developed using a new Digital-Micro-Switch (DMS) fabrication process. This innovative DMS technology enables robust and highly reliable switches capable of handling up to 25 watts of CW power and up to 200 watts of pulsed power.
Download Datasheet | Product Details
Microwave Generator
250 W Microwave Generator from 2400 to 2500 MHz

Microwave Generator  from NXP Semiconductors

The RFEM24-250 from NXP is a fully integrated microwave generator module that operates from 2400 to 2500 MHz. The generator provides an output power of 250 watts with an efficiency of 57%, while operating from a 30 V supply. It’s microcontroller includes an RF source that drives a 3-stage RF amplifier lineup.
Download Datasheet | Product Details
Phase Noise Analyzer
Fully Automated Phase Noise Analyzer from 5 MHz to 50 GHz

Phase Noise Analyzer  from Noise XT

The NXA-50 from Noise eXtended Technologies is a fully automated Phase Noise analyzer that operates from 5 MHz to 50 GHz. Its dual channel architecture allows the system to use a cross-correlation process to cancel its internal noise floor. This reliable combination enables absolute or residual phase noise measurements down to the thermal noise and offers a frequency offset from 0.01 Hz up to 40 MHz.
Download Datasheet | Product Details
Base Station Antenna
4-Port Base Station Antenna from 790-960 MHz and 1710-2170 MHz

Base Station Antenna  from Rosenberger

The S-Wave 0709/U-65-15/17D-F from Rosenberger is a 4-port Base Station Antenna that operates from 790-960 MHz and 1710-2170 MHz. It delivers a gain of up to 17.1 dBi and can handle an input power of up to 400 watts. The antenna measuring 1550 x 295 x 145 mm is available with 7-16 DIN female connectors.
Download Datasheet | Product Details
RF Transistor
10 W GaN HEMT from DC to 6 GHz

RF Transistor  from Wolfspeed, A Cree Company

The CG2H40010 from Wolfspeed is a GaN High Electron Mobility Transistor that operates from DC to 6 GHz. It provides an output power of 10 W and a gain of 18 dB at 2 GHz while operating from a 28 V supply. This device is available in both screw-down, flange and solder-down, pill packages. The CG2H40010 is ideal for 2-way private radios, broadband amplifiers, cellular infrastructure, and test instrumentation applications.
Download Datasheet | Product Details
RF Amplifier
L-band Bi-directional GaN Amplifier from 1 to 2 GHz

RF Amplifier  from NuWaves Engineering

The NW-BA-12B04A-02 from NuWaves is a bi-directional amplifier that operates from 1 to 2 GHz. This L-Band amplifier provides 17 watts of output power at the Tx port. On the Rx side, it provides a gain of 13 dB with a noise figure of 3.5 dB. The amplifier has a Tx/Rx switch time of 1.5 microseconds.
Download Datasheet | Product Details
RF Amplifier
600 W Solid State LDMOS Power Amplifier from 10 kHz to 250 MHz

RF Amplifier  from Exodus Advanced Communications

The AMP2080DA is a solid state power amplifier from Exodus that operates from 10 kHz to 250 MHz. It provides an output power of more than 600 watts with a gain of over 58 dB. The class AB linear LDMOS amplifier has a wide instantaneous ultra-wide bandwidth and is suitable for all single channel modulation standards. It is available in an 8U rackmount chassis that measures 430 x 311 x 560 mm with an N-type female connector at the input and output interface.
Download Datasheet | Product Details
Directional Coupler
10 dB Directional Coupler from 18 to 40 GHz

Directional Coupler  from MECA

The 765-10-29.000 from MECA is a 5G ready millimeter-wave coupler that operates from 18 to 40 GHz. Available with a coupling value of 10 dB, this coupler has an insertion loss of 1.3 dB and directivity of over 12 dB. It can handle an average power of up to 20 watts and has a VSWR of 1.80:1. The 765-10-29.000 is available in a module with 2.92mm female connectors.
Download Datasheet | Product Details
RF Spectrum Analyzer
Remote Controlled Real-Time Spectrum Analyzer from 9 kHz to 20 GHz

RF Spectrum Analyzer  from Aaronia AG

The Spectran HF-80200 V5 RSA from Aaronia is a Remote Controlled Real-Time Spectrum Analyzer that operates from 9 kHz to 20 GHz. It has a real-time analysis bandwidth of up to 175 MHz and a very fast sweep speed of up to 14 THz/s. The analyzer is available with Aaronia's 3D Real-Time Spectrum monitoring and recording Software.
Download Datasheet | Product Details
Waveguide Termination
High Power Waveguide Loads from 10.70 to 12.75 GHz

Waveguide Termination  from Smiths Interconnect

The SpaceNXT Ku Series from Smiths Interconnect is a family of high power WR75 terminations (Load) operating from 10.70 to 12.75 GHz. The Series has been specifically designed for MEO/GEO satellites and offered with recognized testing sequences in order to reduce delivery times and overall cost of ownership. The devices demonstrate low and stable insertion loss characteristics when operating at high powers.
Download Datasheet | Product Details
Block Up Converter
20 W Block Up Converter from 17.3 to 18.4 GHz

Block Up Converter  from Actox

The ABE20UDBS from Actox is a Block Up Converter which upconverts an input frequency from 950 MHz to 1700 MHz to an RF frequency from 17.3 to 18.4 GHz. The BUC delivers an output power of 20 watts with a gain of 68 dB. It works on a wide range of supply voltages from 15 V to 60 V, while consuming up to 127 W of power. The BUC is available in a module that measures 179 x 140 x 58 mm with N-type or F-type field-exchangeable IF connector.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Box for Sub-6 GHz Applications

RF Shielded Test Enclosure  from RF Electronics

The HDRF-1560-D from RF Electronics is an RF Shielded Test Box that operates at frequencies up to 6 GHz. The test box can be used to test WLAN devices, 802.11 a,b,g,n, Bluetooth, RFID and other applications that operate in the sub-6 GHz frequency band. It has a thick RF absorbing foam that dampens standing waves and reflections by providing an isolation of over 130 dB under 1 GHz and over 90 dB at 6 GHz.
Download Datasheet | Product Details
RF Test Set
5G Base Station Analyzer for Large-Scale Deployments

RF Test Set  from Viavi Solutions

The CellAdvisor 5G from Viavi Solutions is a base station analyzer capable of validating and troubleshooting 5G radio access. This field-portable solution has a combination of real-time spectrum analysis and 5G beam analysis functions, as well as the ability to test fiber, coax, and air interfaces. It supports beamforming analysis, massive MIMO and carrier aggregation.
Download Datasheet | Product Details
RFID Tag IC
NFC/RFID Tag IC with 2 Kbits of Memory

RFID Tag IC  from STMicroelectronics

The ST25DV02K-W1 is an NFC/RFID tag IC with 2 Kbits of electrically erasable programmable memory (EEPROM). This IC has two interfaces - the first one delivers up to 2x independent pulse width modulation output signals and the second is an RF link activated by the received carrier electromagnetic wave. The PWM outputs are configured at boot time and can be updated live through RF link.
Download Datasheet | Product Details
RF Module
915 MHz Surface Mount LoRa Transceiver

RF Module  from RF Solutions

The LAMBDA62C-9S is a 915 MHz radio module with integrated Semtech SX1262 LoRa™ modem providing ultra-long range, spread spectrum communication and high interference immunity with minimal current consumption. It has a receive sensitivity of -148 dBm and provides transmit power of up to 22 dBm.
Download Datasheet | Product Details
Sponsored by Coilcraft
Wirewound Ferrite
Wirewound Ferrite Beads Offer a High Magnitude of Attenuation across a Wide Frequency Range
Coilcraft wirewound ferrite beads provide superior attenuation and frequency performance, allowing smaller solution sizes compared to traditional thick-film chip ferrite beads. Click here to Learn more!
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, new white papers, articles, interviews and much more.