PREV 24th June, 2019 NEXT

Latest News & White Papers this Week

24 June, 2019 - everything RF Newsletter

RF & Microwave industry updates.

 
Date: 24 June, 2019
 
Sponsored by Custom MMIC
 
 
 
Latest News this Week
IMSAR High-Altitude Radar Systems Use 3D Printed Antenna Arrays - IMSAR
IMS 2019 Records an Increase in Attendance and Exhibiting Companies - IMS 2019
Qualcomm Uses Keysight 5G Network Emulation Solutions to Demonstrate First 5G Laptop - Keysight Technologies
20 Billion Wi-Fi Enabled Devices to Ship from 2019-2024 - ABI Research
Next Generation of UWB Technology Enables Security & Precision Sensing in Wireless Devices - NXP Semiconductors
Siklu's 60 GHz Gigabit Wireless Solution Incorporates Facebook's Terragraph Technology - Siklu
LoRa-based Devices Connect to Satellite Gateways Using the LoRaWAN Protocol - Semtech
US Marines Award $958 Million Contract to Northrop Grumman for GaN Radar Systems - Northrop Grumman
NB-IoT / LTE-M Issues Boost LoRa / Sigfox Market Share for IoT Networks - ABI Research
Don't Miss these 5G Demonstrations at MWC19 Shanghai - GSMA
Seamless Air Alliance to Demonstrates Inflight Connectivity at Paris Air Show 2019 - Seamless Air Alliance
More News
New White Papers & Articles
Understanding 5G Coexistence Testing Requirements - Keysight Technologies
Clock Jitter Definitions and Measurement Methods - SiTime
High-Efficiency, Ka-band GaN Power Amplifiers - QuinStar Technology Inc
Power Supply Management of GaN MMIC Power Amplifiers for Pulsed Radar - Analog Devices
Evolution of the Modern Receiver in a Crowded Spectrum Environment - Rohde & Schwarz
More White Papers
Upcoming Event
Event Image
MWC Shanghai 2019
Date: 26 to 28 June, 2019
Location: Shanghai New International Expo Centre, China
More Events
Sponsored by Custom MMIC
Custom MMIC
High Performance RF and Microwave MMIC Devices
Explore Custom MMICs recently updated product portfolio of high-performance RF and Microwave MMICs including the CMD304 that boasts an ultra-wideband operational range of DC-67 GHz with the best performance in the industry. Click here to learn more.
 
Featured Products this Week
Signal Generator
8 kHz to 3 GHz / 6 GHz Vector Signal Generator

Signal Generator  from Rohde & Schwarz

R&S SMBV100B from Rohde & Schwarz is a Vector Signal Generator that operates from 8 kHz to 3 GHz or 6 GHz. The generator can deliver up to 34 dBm of output power and also provides envelope tracking and digital predistortion (DPD). It provides excellent signal quality for vector-modulated signals, with a powerful baseband section with up to 500 MHz bandwidth.
Download Datasheet | Product Details
USB Power Sensor
USB/Ethernet Power Sensor from 10 MHz to 8 GHz

USB Power Sensor  from Mini Circuits

The PWR-8P-RC from Mini Circuits is an USB/Ethernet power sensor from 10 MHz to 8 GHz with 80 dB of dynamic range. The sensor allows measurement of RF power levels down to -60 dBm and has a sample rate of 2 µs. This compact sensor-head can be connected to any PC and start carrying out peak and average measurements of CW and pulse modulated signals.
Download Datasheet | Product Details
RF Amplifier
220 W Class A Power Amplifier from 700 MHz to 6 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 250S1G6 from AR RF/Microwave Instrumentation is a Solid-state Class A power amplifier that operates from 700 MHz to 6 GHz. It provides an output power of 53.4 dBm (220 W) with a gain of over 54 dB. The low spurious signals and high linearity of this device make it ideal for use as a driver amplifier for testing wireless components and subsystems.
Download Datasheet | Product Details
RF Module
LoRaWAN and Bluetooth 5.0 Combo Module

RF Module  from Insight SiP

The ISP4520 is a Smart LoRa and Bluetooth Low Energy Combo Module from Insight SIP that has integrated Nordic's nRF52832 BLE chip and Semtech's SX1261 LoRa transceiver. Processing power is provided by the Nordic nRF52’s onboard M4 floating point processor, with 512Kb of flash memory available for advanced applications. The Semtech SX1261 provides the LoRa radio function.
Download Datasheet | Product Details
Front End Module
Switch + LNA Receiver Module from 2.3 to 2.7 GHz

Front End Module  from pSemi

The PE53211 from pSemi is a Switch + LNA receiver module that operates from 2.3 to 2.7 GHz. This dual-channel configuration receiver module integrates a two-channel LNA with bypass function and high-power switch. The module delivers a low noise figure of 1.4 dB and has a OIP3 of 30 dBm. It offers ESD protection up to 1kV HBM and operates in environments up to 105 degrees Celsius.
Download Datasheet | Product Details
Power Divider
15-Way Power Divider from DC to 2150 MHz

Power Divider  from JFW Industries

The 75PD-169 from JFW is a 15-way resistive power divider that operates from DC to 2150 MHz. It has an insertion loss of 29.5 dB and can handle an input power of up to 0.5 watts. The divider has a typical input VSWR of 1.40:1 and is available in a module with N-type female coaxial connectors.
Download Datasheet | Product Details
RF Amplifier
2 to 18 GHz High Gain Limiting Amplifier

RF Amplifier  from AmpliTech

The APT55-02001800-7016-66-LMS from AmpliTech is a Limiting Amplifier that operates from 2 to 18 GHz. It provides an output power of 20 dBm and gain of 80 dB with a noise figure of under 4 dB. The amplifier is designed mainly for IFM EW airborne applications where multiple signals are present at the input and low harmonic distortion is required to preserve the two-tone ratio at the output under limiting conditions.
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier from 1 to 3 GHz

RF Amplifier  from NuWaves Engineering

The HILNA LS-C021-D from NuWaves is a broadband L & S-band low noise amplifier that operates from 1 to 3 GHz. It provides an output power of 33 dBm, a typical gain of 15 dB, a noise figure of less than 2 dB, and a reverse isolation of 20 dB. The amplifier requires a supply voltage of 5 to 15 V and is available in a module that measures 2.50 x 1.75 x 0.75 inches with SMA (M/F) connectors including a NW-LN-ACC-CB09MG interface cable.
Download Datasheet | Product Details
RF Amplifier
Solid State High Power Amplifier from 26.5 to 40 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP3132A from Exodus Advanced Communications is a solid state high power amplifier that operates from 26.5 to 40 GHz. It delivers an output power of more than 15 watts with a gain of over 52 dB and has a noise figure of less than 12 dB. This Class AB linear GaAs amplifier requires a supply voltage of 8 VDC and consumes 32 A of current. It is available in a module with 2.92 mm K-type female connectors.
Download Datasheet | Product Details
Bias Tee
50 kHz to 26.5 GHz Non-resonant Bias Tee

Bias Tee  from Marki Microwave

The BT1-0026 from Marki Microwave is a high power Bias Tee that operates from 50 kHz to 26.5 GHz. It has been designed using a custom, resonance-free conical inductor to achieve exceptional broadband performance. The bias tee has an insertion loss of 2 dB, isolation of over 50 dB and a return loss of 14 dB. It can handle an input current up to 1 A and max DC voltage up to 50 volts.
Download Datasheet | Product Details
SATCOM Transceiver
Ka Band 5 W Linear Transceiver from 29 to 30 GHz

SATCOM Transceiver  from SAGE Satcom

This Ka Band Transceiver from SAGE Satcom operates from 29 to 30 GHz. It has an integrated 5 W BUC and LNB resulting in compact and light weight assembly that allows direct mounting to the antenna feed arm. The transceiver is capable of generating a saturated output power of 7 W, a linear power of 5 W and has a noise figure of less than 1.5 dB. It requires a supply voltage of 28 to 48 VDC and consumes 50 W of power.
Download Datasheet | Product Details
Signal Generator
USB RF Signal Generator from 34.4 MHz to 4.4 GHz

Signal Generator  from Windfreak Technologies

The SynthUSBII from Windfreak is a software tunable RF signal generator that operates from 34.4 MHz to 4.4 GHz. This device also has nonvolatile on board memory so it can be programmed to fire up by itself on any frequency, power, sweep or modulation setting. RF power is controlled by two bits in the PLL chip and there is a total of 10 dB of output power adjustment in 4 steps.
Download Datasheet | Product Details
Directional Coupler
6 to 40 dB Directional Couplers from 0.3 to 4.2 GHz

Directional Coupler  from MECA

The 715S Series of Directional Couplers from MECA are available in multiple frequency configurations from 0.3 to 4.2 GHz. These couplers have coupling values of 6, 10, 20, 30 & 40 dB and can handle up to 500 W of power (100 W, 250 W and 500 W). These directional couplers are available in a module with SMA connectors and DC Isolated RF ports.
Download Datasheet | Product Details
Voltage Controlled Oscillator
Low Noise VCO from 27 to 40 GHz

Voltage Controlled Oscillator  from NI Microwave Components

The VTO-33500-40L from NI Microwave Components is a Voltage Controlled Oscillator which can be tuned to a frequency from 27 to 40 GHz. It has a tuning voltage from 4 to 22 V. This VCO provides a phase noise as low as -83 dBc/Hz at a 100 kHz offset while operating on a supply of 5.5 VDC. It delivers an output power of 18 dBm into a 50 ohm load.
Download Datasheet | Product Details
RF Mixer
4 to 10 GHz Mixer with Integrated Synthesizer

RF Mixer  from Texas Instruments

The LMX8410L is a high-performance mixer with an integrated LO and IF amplifier that accepts an input RF frequency from 4 to 10 GHz and downconverts it to DC to 1350 MHz. It provides an excellent dynamic range for high-performance applications with an IIP3 of 28 dBm and NF of 15 dB (both at 5 GHz).
Download Datasheet | Product Details
Multicoupler
8-Way Multicoupler for GPS/GNSS Applications

Multicoupler  from Microlab

The GPSS008-S from Microlab is a 8-way multicoupler that operates from 1.559 to 1.610 GHz. It delivers a gain of 6 dB with a noise figure of 3 dB. This multicoupler provides an isolation of more than 20 dB and can handle an input power of up to -10 dBm. It is available in a IP67 rated module with SMA female connectors and is ideal for signal distribution for cellular communications, GPS/GNSS transmission re-broadcasting to multiple antennas and as compact splitter for small cell sites.
Download Datasheet | Product Details
Antenna
Iridium Certified Passive Embedded Antenna

Antenna  from Maxtena

The M1621HCT-P-UFL is a passive embedded antenna operating from 1616 to 1626 MHz. It is designed for the Iridium network and built on proprietary Maxtena Helicore® technology, that provides exceptional pattern control, polarization purity and high efficiency in a very compact form factor. This antenna delivers a gain of 2.8 dBic with an efficiency of 60%.
Download Datasheet | Product Details
Sponsored by Custom MMIC
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, articles, white papers, interviews and much more.