1. everything RF
  2. RF Newsletters
more
PREV July 28, 2014 NEXT

News, White Papers and Featured Products

28 July, 2014 - everything RF Newsletter
 
everything RF
Date: 28 July, 2014
 
Industry News this Week
Eight RF Components from Infineon Technologies in the Samsung Galaxy S5 - Infineon Technologies
Update in NI AWR Design Environment V11.01 Dramatically Reduces Simulation Times - NI AWR
Pasternack Introduces New Series of Low PIM Cable Jumpers - Pasternack
Harris Receives $15 Million Order from a Middle East Nation for Wideband Handheld Radios - Harris
Agilents PXIe Modular Vector Signal Test Solution Accelerates Power Amplifier Development - Agilent
Peregrine and RFMD Settle All Outstanding Litigation on RF SOI Technology - Peregrine
More News
New White Papers
Testing Phase Noise of Ultra Low Phase Noise OCXO - Challenge and Solutions - NEL Frequency Controls
PCB Design Guidelines for High Power Dissipation Packages - Skyworks
Webinar: PIM Testing DAS - Which Frequency Band Should You Use? - Anritsu
LTE Power Amplifier Module Design: Challenges and Trends - Skyworks
Intermodulation Distortion Measurements on Modern Spectrum Analyzers - Rohde & Schwarz
More White Papers
Upcoming Events
Event Image
MILCOM 2014

Date: 6 to 8 October 2014

Location: Baltimore, United States

 
More Upcoming events
White Papers, Application Notes and Videos
 
 
 
Featured Products
Fixed Attenuator
5 to 30 dB, 100 Watt Low PIM Fixed Attenuator Series

Fixed Attenuator from JFW Industries

The 50FLP-XXX-100 is a 100 Watt fixed attenuator that operates from 698 to 2700 MHz. It is available in multiple configurations from 5 to 30 dB (5, 6. 10, 20 and 30 dB). The Attenuator can handle up to 100 watts of average power and 1000 watts of peak power. It is available in a module with N Type connectors and an integrated heat sink.
 
Download Datasheet | Product Details
 
Band Pass Filter
Ceramic Band Pass Filter with 6550 MHz Center Frequency

Band Pass Filter from Networks International Corporation

This Ceramic Bandpass filter from NIC has a center frequency of 6550 MHz with a 300 MHz 1 dB bandwidth. It has an insertion loss of 2.5 dB and isolation of over 40 dB at 7200 MHz. It can handle up to 20 dBm of power and is available as a surface mount package that measures 0.83 x 0.51 x 0.19 inches. This filter is ideal for C Band Applications, hand-held radios and radar applications.
 
Download Datasheet | Product Details
 
Coaxial Circulator
6 GHz to 40 GHz Coaxial Circulator Series

Coaxial Circulator from VidaRF

The VCC Series of Circulators from VidaRF are available in frequency configurations from 6 to 40 GHz. The circulators have a low insertion loss and isolation of over 17 dB. They can handle 25 W of forward power and 25 Watt of reverse power. Custom configurations are available on request.
 
Download Datasheet | Product Details
 
Coaxial Isolator
6 to 40 GHz Coaxial Isolator Series

Coaxial Isolator from VidaRF

The VCI Series of Isolators from VidaRF are available in frequency configurations from 6 to 40 GHz. The isolators have a low insertion loss and isolation of over 17 dB. They can handle 25 W of forward power and 1 Watt of reverse power. Custom configurations are available on request.
 
Download Datasheet | Product Details
 
Directional Coupler
800 to 2500 MHz Low PIM Directional Coupler

Directional Coupler from MECA

The LP715-15-1.650W from MECA is a low PIM directional coupler with a coupling of 15 dB, a directivity of 25 dB and an insertion loss of 2.2 dB. The coupler can handle up to 500 Watts of average power and 10 K Watts of peak power.
 
Download Datasheet | Product Details
 
RF Amplifier
0.8 to 2.5 GHz GaN, 400 W Linear Power Amplifier

RF Amplifier from Ophir RF

The 5256 from Ophir RF is a linear power GaN Amplifier that operates from 0.8 to 2.5 GHz. It provides a saturated output power of 400 Watts, an IP3 of 60 dBm and a gain of over 56 dB. It can accept CW, AM, FM, PM and Pulse signals.
 
Download Datasheet | Product Details
 
RF Amplifier
2.3 to 2.4 GHz GaN Amplifier Pallet for LTE Applications

RF Amplifier from RFHIC

The RTP23070-20 from RFHIC is a Gallium Nitride Amplifier that operates from 2300 to 2400 MHz. It is based on a Doherty amplifier design and is matched to 50 ohms at the input/output. The amplifier provides an output power of 48.5 dBm and 56 dBm of peak saturated power (10% duty cycle).
 
Download Datasheet | Product Details
 
RF Cable Assembly
26.5 GHz Low Loss Flexible Cable Assemblies with SMA Connectors

RF Cable Assembly from HASCO Components

The HULL190 Series from Hasco are low loss flexible cable assemblies that can operate up to 26.5 GHz. They have very good phase stability vs flexure and temperature. The cable has an insertion loss of 0.39 dB per foot and an amplitude stability of 0.2 dB at 26.5 GHz.
 
Download Datasheet | Product Details
 
Between Series Coaxial Adapter
DC to 6 GHz, Low PIM Adapter 7/16 Male to Type N Male

Between Series Coaxial Adapter from HASCO Components

The 716P-NP-SLP from HASCO Components is a low PIM 7/16 Male to N Type Male adapter. It operates from DC to 6 GHz with a VSWR of less than 1.2:1. The adapter is matched to 50 ohms and has a PIM of less than -168 dBc. It has a silver plated inner and outer conductor with a PTFE dielectric.
 
Download Datasheet | Product Details
 
Modulator
0.5 to 2 GHz I/Q Vector Modulator

Modulator from Planar Monolithics Industries

The PIQ-0R5G2G-360-20-CD-1 from PMI is an I/Q Vector Modulator that operates from 0.5 to 2 GHz. It has a dynamic range of 20 dB & 360 degrees with an insertion loss of 11 dB. The I/Q Modulator has 2 x 12 bit monotonic TTL compatible channels (I and Q) and is available in a module with SMA Female connectors.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.